Antec NX200M - PC Build
Vložit
- čas přidán 17. 10. 2021
- Antec NX200M PC Build video
Due to high demand of people asking me to add prices, I added all "current" prices of the products. Note that these prices keep changing.
☕☕ BUY ME A COFFEE! ☕☕
Show your support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
www.buymeacoffee.com/tech_raptor
► Awesome Mousepads:
www.hivem1nd.com/
► Case: Antec NX200M
EU: www.alternate.nl/html/product...
USA: amzn.to/3ASk64S
► Motherboard: ASUS ROG Strix Z490-G Gaming
EU: amzn.to/2YYDgsz
USA: amzn.to/3aTHnIM
► CPU: Intel i9 10900K
EU: amzn.to/2M8g6dc
USA: amzn.to/3r3h2yk
► RAM: KINGSTON FURY Renegade
EU: amzn.to/3BTg6lX
USA: amzn.to/3DSf4al
► Cooling: Antec Kuhler H2O K240 AIO
EU: amzn.to/3pthV5N
USA: www.newegg.com/antec-liquid-c...
► Graphic card: Palit RTX 2070 GameRock
www.palit.com/palit/vgapro.ph...
► PSU: Antec Neo ECO Gold 600W
EU: amzn.to/2SLVbiY
USA: amzn.to/3y7zjPi
► Custom Cables: ReaperCable Extension kit
amzn.to/2Iy3udt
► Extra Fans: Antec PRIZM 120 ARGB 3in1 Pack
EU: amzn.to/3pb4qaA
USA: amzn.to/3G2aAjs
► Gear used making this video available on Amazon:
Main Camera:
NL: amzn.to/343cy20
DE: amzn.to/3j3Wt0j
UK: amzn.to/2T0Mm1q
USA: amzn.to/3j51wxe
Main Lens:
NL: amzn.to/2H5i7Uu
DE: amzn.to/3j5ImaF
UK: amzn.to/3k4LNjh
USA: amzn.to/2IsYNRE
SD card:
NL: amzn.to/37hCSaJ
DE: amzn.to/37cWhcG
UK: amzn.to/31cuQMu
USA: amzn.to/2FxyrNi
► Connect with me!
Instagram: / tech_raptor
/ tech_raptor - Hry
This dude puts two fans on top of the case, but no fans for the radiator. Let's hope people don't follow this video for a PC build.
Thought I was the only one to see that but wasn't sure if I got distracted somehow and missed it.
Agree
You can see fans at 5:35
@@baronnucleus401 BARELY
I know you with Instagram and I saw that you have a CZcams channel,
I like your builds, there are beautiful ❤️
Could you fit a 280 AIO in there, if you had a shorter GPU?
Where are the fans for the front aio?
no coolers on the front radiator?
That 128GB ram seems like enough to cool down the CPU no radiator fan needed
will this fit a 3080?
Espectacular
How in the blue blazes did you open the front of the case?
I’m trying to figure that out too
@@King_Shane11 pull the front panel from the bottom, there's a little metal tab
Can freezer 34 fit in this case?
EDIT: The answer is yes, it can be installed in this case 🙂
easily
How did you get the aio on the outside 4:06
lol my question too. at the assembly the radiator was definitely inside but when he put the LED strip it's outside. does the front panel allow radiator in it? the finished shot seems to omit that part of the PC intentionally lol
very cool music in your videos. is it possible to state its author in the description too?
why does your radiator have no fans? damn...
at first the radiator is placed inside the case and should have intake-fans mounted on the outside but because he choose a beefy GPU there is not enough room! after placing the card the radiator is gone and was moved to the outside with no more room for the fans.
this support atx psu? (Thermaltake SMART 600W ATX), thank you
Yup it supports full ATX psu.
This case can support a 300mm lenght gpu? Thanks
275mm
sorry for the noob question, but it is possible to fit a full size ATX board in this case?
unfortunately no, this case is M-ATX. it only supports Micro ATX motherboards
@@trio0512 Hello if its fine to ask how do i open the front panel of the case?
@@yuezuha7970 im sorry but i dont own this case, i think you could take it off by pulling it Im not sure tho
@@trio0512 theres this thing under the case, i tried pulling it but im scared that i will break something
@@yuezuha7970 what is it?
can i put 280mm radiator on front ?? is that posible?
Yes i think
I'm using this case for a couple of months and the only thing I don't like is that front panel connectors are not in one connector so it's little complicated to connect them to the motherboard and that blue LED when the pc is on is terrible. It hurts my eyes lol. Other than that great mATX case.
Hey, how good are the thermals?
@@jakeedwards5535 I have inastalled at the front Arctic BioniX 140mm,at the back Bionix 120mm and I have Arctic Freezer e34 duo and temperatures are below 40°
Can't you change the colour of the RGB?
Can i install 310mm gpu in this
@@Bhat.majid.7 probably no, in the official site it only contain up to 276mm for GPU, if you wanna built higher end build which has 3 fans GPU don't go for this one, i even have a hard time to find rx 6700 with 2 fans so i can fit it in, since most people use 3 fans for it.
it may be small, but it's definitely bigger inside than a Dell Optiplex case. you wouldn't be able to get all that in a Dell, the GPU alone wouldn't fit. that being said you should've put a fan on that radiator, but it's not my build. if your new to PC building, All In One Liquid Coolers are not for beginners. just get yourself a CPU Air Cooler if your a beginner.
Красивый корпус.
no one notice that the pump slightly pushing the ram there
Specs say max gpu length support 275mm . The card you installed was 292 ? How
275 is just being extremely safe
Those numbers are guidelines not requirements
Also for the CPU cooler it says that supports up to 150mm coolers but I installed Frezeer 34 without a problem which is 157mm cooler
@@enigmalex3649 Yep. I saw the max height of 150 mm and contacted Antec directly. The eSports Duo is also compatible at 157 mm.
@@michaellovejoy5299 I wanted mATX case and I almost didn't bought it because I thought that eSports duo couldn't fit in this case and than I read reviews on Amazon and someone installed Dark Rock 3 without top plate which is even higher cooler and than I immediatelly bought this case lol.
solution: CPU-Tower-Cooler is better and cheaper than a 240 radiator without fans. solution2: if the CPU has to be watercooled get a shorter GPU.
Where is the fans in the radiator? Nice trick.
Thats what im saying like what is the point
There is one fan installed in front above the GPU it's just difficult to see from the camera angles in the video. That being said it still doesn't look very effective. It's pulling air through the radiator instead of pushing cool air through.
I just received my NX200M yesterday. I'm gonna buy a Phanteks T30-120 Fan Triple-Pack.
Did you forget to put the fans on the aio radiator?
I was thinking the same thing. Looks like there is one fan installed that is pushing air from INSIDE the case through the radiator. 🥴 All the other fans are exhaust. So I can't see how it's able to intake any air to cool the PC.
Edit: the fan installed in front is pulling air through the radiator. The Prizm fan has a ring on each side. Can't say how effectively it's cooling the CPU with only one fan pulling air through the radiator instead of two fans pushing cool air from outside the case through it. GPU isn't getting much or any cool air either. Only what it's able to pull in from the back of the case.
I have my B550M/5600X build in this case 😊
@@Dream_Night sadly the case is not that small, it's mATX not ITX
@@camotech1314 ok thanks
@@Dream_Night you're welcome! 😊
@@camotech1314 👍
128gb ram yet you have no fans mounted to the aio
Ma guy
👍
I thought the same at first, look at 5:35
well got this for around 30$ in my country
128 gb of ram?? bit much man
Lmao speaking of overkill
Flip your Radiator. The pipes need to come out on the bottom. The system has some air in it which will travel to the highest point. The pipes at the top means air may travel to the cpu and drastically affect the effectiveness of the cooling as well as cause issues for the pump.
Only if the pump is higher than the rad. This config might cause a little waterfall noise, but you will experience no decrease in pump life or performance.
@@tag206 Yes you are correct but what's been done in this video is not best practice. Best practice when you cant mount your rad in the top of the pc is to mount it pipes down.
If you didn't put in a rear fan or used a slim fan could the aio fit in the top?
I have antech nx 200 🤮