Alienware Ripped EDP Display Connector Repair using NF.Mini Solder Pen
Vložit
- čas přidán 12. 12. 2022
- NF.Mini Solder pen northridgefix.com/product/por...
⭕ Visit our ecommerce shop and buy all your tools at northridgefix.com
⭕ Ask questions and Engage in our Forum at northridgefix.com/forum/
⭕ Need a repair? northridgefix.com/mail-in/
⭕ We are an Amtech Flux Distributor. Buy AMTECH NC-559-V2-TF Flux
northridgefix.com/product/amt...
Microscope northridgefix.com/product/mic...
UNI-T UTi260B thermal Camera
northridgefix.com/?s=thermal+...
Grinding pen
northridgefix.com/product/gri...
Low Melt Solder
northridgefix.com/product/low...
NorthridgeFix T-shirts
northridgefix.com/product/nor...
Weller Soldering station ebay.us/1mvgt5
=================================================== If you are local, drop in and say hello
NorthridgeFix
19365 Business Center Drive, Unit 7
Northridge, CA 91324
Phone: 818-668-7058
NorthridgeFix.com - Věda a technologie
Thank you for the video as always! You have made my shop lots of money through your teachings. Just today I injected power to a short circuit I found on a PS5 and found the cap that caused it and we made good money for a quick job. I used alcohol to find it but I will buy a thermal camera soon. We purchased the microscope from you for the great product and as a thank you for the knowledge. You’ve also taught me to never just take but to also give. You have changed our business and I am forever grateful. I vacation in California when I have time and when I’m there next I will stop by and thank you personally with a gift. Peace be upon you.
After watching your videos, using proper flux and low melt solder, I was able to practice and replace a broken 30pin FPC connector. I even was able to replace 18 broken traces which my friend ripped out. Luckily he didn't make it a Hiroshima. I don't even have a hot air rework station but your video is gold teaching multiple ways of doing same job. It's incredibly small to replace 0.8mm pitch FPC traces. It amazes me how you do it. It took me 4 hours with 6 breaks as hands were becoming numb. Thank you Alex.
I love the marketing concept that you use for your products and merchandise. Very simple and effective.
"We don't use it because we sell it. We sell it because we use it!"
I enjoy watching your videos because of your technical expertise and great personality. Thanks for sharing 👍
I keep telling my girfriend that the shorter the tip, more precision! But she just doesnt listen. 😂😂
Unfortunately, precision only applies to some rather ehm peculiar cases. For the rest of them size seems to matter.
She already knows what the large tip can achieve
She has logic though. How precise you need to be to hit one out of two large targets.
Doesn’t matter what size it it’s how you use it
That's true, but the larger the tip and the longer the pen, deeper jobs you can accept and more satisfied the customer will be at the end.
Beyond being educational, these videos are just extremely relaxing and enjoyable to watch. Really appreciate the hard work and vids. :D
Glad I'm not the only one.
This why I like watching you work, YOU ARE A PERFECTIONIST!
لي سنتين او اكثر اتابع قناتك ,, ادمان ..تحية لك ولعائلتك من السعودية
❤
Just did this for my son's laptop worked like a champ!!! thanks guys again!!!!
We truly appreciate your hard work and daily lessons. Who knew I would find this so zen ty Alex Big Boss and family.
Really enjoying the videos. I was off work yesterday and spent half the day watching the older ones. You do an amazing job! I am going to mention you to my viewers on my next video.
Seeing you attach that screen connector made me realize that you could have been an outstanding surgeon.
Great job man,,,,, All the pins are "Sol it".🙂
"Boss of all big Bosses " always cracked me up... Grace Respectfully I should say...
Man, as the mod for the Alienware sub, the amount of times I have seen this exact thing get asked and seen people do this. Awesome job!
A WHAT lol ?
Great work as usual Alex!! On a funny side note, watch the video at 1/2 speed to hear a "drunk Alex" LOL
Great video Alex. Really good work with fine soldering.
20:19 This part motivated me to clean my monitor 😆
P.S.: very nice work on this one, I envy your steady hand.
😂🔥
Please do 1-2 hour long workflow videos. Could watch it every day!
live stream if possible
respect, this was a surgical job.
Nice work Alex, as usual we did an amazing job!
phenomenal job Alex keep up the work
Fantastic job Alex!
I wish I could live in California I'd be there learning from you great job alex... I look forward to all your videos...thank you for all that you do in your vids...
Incredible work - it is like art. Magic. Well done. Good job alex, and of course bigboss also. Thank you for that video. Greets
Appreciate your explanation on the pen today. I actually learned something. Thanks👍👍
Clean job Alex, nice to get other view in shop and see the goodie’s
Ur crazy talented ! All through hard work.
Kool, i might not open up computer repair shop ever, but i might fix one myself one some day, now i know what ones need to be separated.
thanks for sharing skill and knowledge.
Thank-you Alex.
nice fix as allways Alex
I told my wife that.... the shorter the tip the more precision - lol
The flux liquid what you use is very usefull , and this help more for a good soldering
You missed the part where you say "the freshest flux on the market". Keep up with the great work greetings from Argentina
Well done!
I am very happy with the microscope
Good work Alex,amazing skills man! wish i can understand more about this world of electronics , looks like magic...
But at the same time you give us the motivation to do something like that in our daily life stuff,even if its not about the eletronics...always do things with joy
Big love from Portugal
Another tuga(portuguese) here,big fan,that watches all your videos
Good job mate 👍
Did the big boss say BISMILLAH before plugging in the charger? 🤯 MashaAllah Bro. 🖤
nice job with new nice black camera
awesome as always, it will be goodt to customize the solder wick to be have the same flux that you using
It is really hard to work like that, having to fix computers and having customers all the time at the desk. It reduces your productivity and you lose focus.
I love it when after each repair Big Boss says : Bismillah
16:00 NF.Lullaby 😌
Great job
Too bad you are so busy, i love store tours and i would like to see you recieving bog orders like this, even example follow an order process
I’m glad I got some flux a few weeks ago
Good job
Like a job in the town 🎄
Nice work like always 👌
You need a T-Shirt that says "Better than factory."
nice work ..
Good job brother
sometimes the hardest part is putting the laptop back together in some cases like me and big boss we loose are hair with these kind of jobs.
The state of some of the laptops sent to you still shocks me…. Some are truly filthy ! How can someone use a laptop whilst having to look through a covering of crud on the screen ? If I were sending a laptop to you I would at least give it a clean out of respect for you and big boss having to handle it. You see similar on car repair videos where people leave their rubbish and half eaten food all over the interior of the car for the mechanic to wade through. Some people are just gross 🤣 Great job on the LCD connector repair. Your micro soldering skills and steady hands are amazing 👍
Nice work!
It's amazing that people don't clean their laptop screens. That one is nasty.
😂🔥
kudos for boss of all bosses … basmallah before plugging in power. ❤
Can you share what equipment you use for your videos? The quality of video and sound is perfect. Thanks you!
PS I love your videos, enjoy the "can do" approach and your well honed skills.
these connectors are brutal. no match for Alex, though. well done.
As a man who works with technology, when one of your own personal devices break do you repair them yourself or you just buy replacements?
And for the second question, dealing with microscopic electrical repair work, is it as good as doing surgery in a clinic? Do you think an electrical repair technician can do surgery?
This guy make me want to change my craft 😆
I like the solid solid solid 😅
You CAN use a mini soldering iron to solder on most GPU's (I would say up to 2080 Ti/3070 Ti/6700XT) but you have to spend a lot more time pre-heating the board of course.
Alex just flexing now
What is the mic u r using, and what tools do u use to record the audio ? Its so good
Nice ✌🏾
Awesome ✌🏻✌🏻✌🏻
"The shorter the tip the more precision you have!"
Pls make a shop in Europe to.
I bet the experts were already typing that you had bridged some pins. 😮
I have a t100 solder iron and yeah it's way to long for beginners for sure but you get used to it but I might get the next gen of that iron 😂
Hi Alex, have you also worked with UV resin to repair a broken connector ?
I'd be interested to see you test the hardness of different glues (yes I could do it myself, but then your viewers don't see). Have a good one.
Still amazing ...
I've been saying that for years. Shorter the tip, the more precision ya get...lmao
i tried to convince my ex about it, to no luck
What tool you use for inject voltage ?
"Sick-is-teen". lol
Always appreciate your vids, keep up the great work. 👍
nice
Those laptops really like to play the game eh just toss it to the 9th dimension lol
So when are you moving to the new shop?
Where can I buy this mini pen, on your site there is only portable version
SICKest TEEN!
👍👍
How much is that soldering iron if I buy from USA and the fluxes
I have an X17 R1. I always take my laptops apart to clean them. My first Alienware and I'm dreading taking it apart. The board is so hard to get out of alienwares. (I watched a few "professionals" take apart my model on CZcams) incase I ever have to. I wasn't trusting some random CZcams guide from anyone.
16:13 That's the word for motherboard with ripped connector and dark sludge in other scenario 🙃🤣
Hi Alex, if you're planning to go singing.......don't quit your day job 🤣
Better than factory.
Hey,
When i try to desolder the batteryconnector using Hotair on an iPhone, the solder is not melting at all, i even applied low melt solder before using hotair.
I tried a couple of combinations of Temp/Airspeed, not working at all, the connector melts, before the solder does.
Any suggestions?
AMAZING is your name Clark Kent otherwise known as SUPERMAN
Solid!
hi NF is it posible to send your products for repair in the philippines?
Everything works when you say "Bismillah"!
best
Hi, what kind of glue do you suggest for such mechanical PCB anchorage operations?
I was going to ask this question as well. I thought Alex was going to use solder mask to anchor that component down.
@@graphicd00d75 I think he's using solder mask just whenever he's protecting an electric wire or pad from accidental contacts. Here, Alex needs mechanical strength and some elasticity
Hi there I need help. The edp ribbon cable has this colorful 10 pin connector or 9 part of the motherboard . Does anyone know what it's called its to same laptop
بسم الله ماشاء الله
Mortal Combat--------> Flawless Victory❕❕❕❕❕❕❕❕❕❕❕❕❕❕❕❕😈👍👍
20:07 Bismilillah ...
Came in for display connector replacement.
I just noticed Alex is using a different chair from his other videos. Does anyone know what kind of chair he has? I’d like to send the chair I have into the 9th dimension