Home shop tool tour (part 1)
Vložit
- čas přidán 26. 07. 2024
- Hope you enjoy this series! I know this isnt everything, but I linked some of the stuff i could find.
Looking for some genuine, OEM, Dan's Pro Shop merch? Check out the official website and get yourself some official Dan's Pro Shop merch today! visit, www.dansproshopltd.com/
Sunex 2569, 1/2" Drive Master Impact Socket Set
amzn.to/3T98F3t
Sunex 2568, 1/2 Inch Drive Master Impact Socket Set
amzn.to/401wvQL
Sunex 3580, 3/8 Inch Drive Master Impact Socket Set
amzn.to/406ZZgh
Sunex Tools 1874 1/4" Drive Master Fractional and Metric Impact Sockets
amzn.to/3yve0Zr
IIT 16687 7 Blade & 4 Pin trailer plug Tester
amzn.to/427hKha
OTC 5605 Deluxe Compression Tester
amzn.to/3TdQae5
Tool Aid 23970 in-Line Spark Checker
amzn.to/42cd9dx
Astro Pneumatic Tool 9409A Hose Clamp Pliers
amzn.to/3YN01bU
Swpeet 3Pcs Body Clip Removal Pliers Set
amzn.to/3ZIsnWd
TEKTON Everybit Tech Rescue Kit (46-Piece) | 28301
amzn.to/3mPa1Et
MOTOALL 12 PCS Carburetor Adjustment Tool
amzn.to/3JfhjJa
Harley Davidson 36MM Rear Wheel Axle Wrench
amzn.to/3lbhRaW
Line wrench Crowfoot Set
amzn.to/3FkObz7
Sunex 9914A 14 Piece Angle Head SAE Wrench Set
amzn.to/3YFcIWd
Mechanics Stethoscope
amzn.to/3Fje8z1
24" Forged Steel Curved TIRE IRON PRY BAR
amzn.to/3T8hWc5
Mayhew Pro 61360 3 Pc. Brass Drift Punch Set
amzn.to/3YOsduV
Ferrule Crimping Tool Kit
amzn.to/3mDRNpa
Greenlee KP1022D Terminal Crimping Tool
amzn.to/3YHHvlk
Klein Tools 63050 Cable Cutter
amzn.to/3J9eKZ7
Ingersoll Rand 2115TiMAX 3/8” Drive
amzn.to/3ywlF9R
Ingersoll Rand 2235TiMAX 1/2” Drive
amzn.to/3l791Lp
Ingersoll Rand 105-D3 3/8" Air Ratchet, 3/8"
amzn.to/3TjkHqX
Ingersoll Rand 1105MAX-D2 1/4"
amzn.to/3YKHEUW
Power Probe III
amzn.to/3l9Vm6d
Relay Buddy Diagnostic Pro Test Kit
amzn.to/3Lj2pnC
Noid Light & IAC Test Kit
amzn.to/3TbavRb
Rechargeable UV Leak Detection Kit
amzn.to/3J5pFTm
Snap-on Super-Duty Air Hammer
shop.snapon.com/product/Super...
Snap-on ratchet 3/8" Drive Dual 80
shop.snapon.com/product/Dual-...
Snap-on ratchet 1/2" Drive Dual 80
shop.snapon.com/product/Dual-...
Snap-on True Digital Video Inspection Scope
shop.snapon.com/product/Video...
Snap-on 8 pc 3/8" Drive Impact Driver Set
shop.snapon.com/product/Impac...
Snap-on Enhanced Multimeter TRMS-Color
shop.snapon.com/product/Autom...
#howto #tools #toolbox
Join this channel to get access to perks:
/ @dansproshop
You can definitely tell you were a gear head at one time. A lot of nice tools. I remember the days of Radio Shack. Sure do miss those days. Keep up the good videos. I have learned a lot.
Thanks, I appreciate it!!
Radio Shack…great memories going in there with my Dad!
Sears for Craftsman tools again with my Dad. He got a VA check for disability (WW2) and he would buy tools with it. He would take the time to teach me about tools. Right tool for the job! And clean your tools! He’s gone now but I still hear him now, Lol!
The "Drawer of Thor" !!!! I like it !!! BTW, "Snap-Off" hammers are made by Trusty-Cook, if you want to save some fundage, next time around.....
Thanks for the info!
The Milwaukee M12 line is amazing
Repeat after me "WE DONT GET RID OF TOOLS... EVER" lol
Or G-u/n:s
@@akbychoice "boom sticks" 😉
Radio Shack. Lol. Their slogan use to be "you got questions, we got answers" when the reality was" you got questions, we don't have a clue" nice home setup man
You have so many great tools
Thanks 👍
Radio shack battery of the month card got me hooked on tinkering. No need to steal smoke detector 9 volts. Still the robotic arm.
RIP radio shack!
I love how the Pack of Golds was in the pneumatics drawer.... how fitting haha
I am not the only one that Has Bynford tools I am no longer alone my road chest is a Bynford .....hold it your Bynford is Fake how dare you Bynford is an all Canadian tool company making great tools and boxes lol great Video loved it
Handsome dude right there! 😍
I gotta say snap ons trigger system on there electric ratchet especially really come in handy in tight spots I wonder if Milwaukee can steal there design😂
Definitely miss Sears and Radio Shack!
Wish i could have impact wrench for my job here as a motorcycle mechanic
Good morning love the video,I'm learning so much.Blessings from Barbados
Good morning!
Awesome
Got a similar metal tray for sockets, well over 20 years old, love it. Great for all drive sized impact sockets. Homak makes a good home shop toolbox. It's all about the tools that are in a box, to me? Can't go wrong with the Sunex impact sockets, got the 1/2" and 3/4" drive sets along with Mac and SK smaller sets. Nice setup, Dan.
Thanks!
I have the same box. Got it back in 2004. Still have it. Still in service at a union forklift shop, still stainless. I can’t put one magnet on there. I really wish I could though.
Awesome vid. I can tell you are organized and hard working. Im sure if we blind folded you, you can find any tool even the 10mm. LOL
thanks! my wife makes fun of me for that exact reason. when some one needs a tool i can call out the location with out hesitation. need a screw driver? top box, fourth drawer down, left hand side. lol, its so true!
.
The dessicants can be "recharged" by putting them in a warm-ish (about 150F) oven for an hour or so. It dries them out and they can go back to doing their job.
It's just an assumption that twist-lock tray was developed to keep the 10 mm from running away
Can attest to the desiccant! Always keep the small package that ships with a new tool bag or pouch, etc. keep them in every bag, every zipper pouch that has metal. Never thought to buy in bulk like that! It really does mess around and literally does exactly what it’s intended for! Great video!
Thanks so much!!
You can’t beat the snap on locking flex heads the 1/2 and 3/8 almost never get time in the tool box.
Absolutely!!
I remember when you got this box 👍🏻
Absolutely! You’ve been around my whole life you can testify to the internet that I’m not lying. Lol. I really have done all this stuff!
@Dan’s Pro Shop absolutely ...I'm sure there are going be haters saying daddy's money or what ever .... NOPE!! Dan is legit he worked hard for everything he got 👍🏻
I loved radio shack. Folks don't build their own gadgets any more. We just buy Chinese junk from Walmart and Amazon.
Kiwico and a few others have stem building kits for kids now at least
Nice Think we all have a Junk drawer. Real men like showing they work dirty hands lmao . And the Harley Spanner axel nut is for the 1 inch shaft only . Snap on is great for a Auto Tech I was maintenance I started buying Snap off $300 1/4 to 3/4 3/8 and 1 ratchet 3/8, 12 inch handle . Craftsmen 2500 piece set $500 1986 I think I broke 2 ratchets one in 1/2 and 3/8 was good enough for the stuff I did . Pumps turbine and impeller fluid transfer nothing high presser 4 inch pipe and flange . 1/4 to 1-1/2 and 24 inch pipe wrenches I had cheater pipes up to six foot long 1-1/2 and 2 inch . I still fix anything and I still have my Craftsmen tools from 1986 . I still buy what I need never have everything you need always something.
Not sure if you’ve heard, but the new craftsman factory in Texas is going to be shut down in 2024
When I'd part 2 coming?
Working on it…
Thank you I love your tool box tours
that's not stainless? nice set up btw
sadly no, magnets stick to it just fine. thanks!
@@dansproshop oh interesting. thanks for info
I'd like to see your work box. As a Blow moulding mechanic I can't help but wonder what you have.
Tool box tour (part 1)
czcams.com/video/wHBzBaSyWwA/video.html
Miss trader horn!!!
Where are you from?
SW PA
Is that a panic button or a call bell for another IC Light?
Absolutely! That button fires a relay that operates the pneumatic can crusher! Good spot!!
guess am not sleeping
sounds like you have a pennsylvania accent
Pittsburgh!!
@@dansproshop im from ALIQUIPPA but now live in florida
Posting at 5 am
That’s when I have time to.. lol