Rat Guard Trim - Corner + End Finishes
Vložit
- čas přidán 9. 06. 2024
- Starting a playlist of all the different trims for a post frame home. We've received a lot of questions about rat guard trim and how to finish it off nicely.
Patreon
/ mrpostframe
Design Services
design@mrpostframe.com
0:00 Intro
1:04 Rat Guard End
5:49 Rat Guard Corner
10:58 Conclusion
Search Our Website By Project or Room
MRPostFrame.com
Amazon Store | Project Tools Listed by Category
www.amazon.com/shop/marshallremodel
Finishes, Fixtures, Decor, + More
www.shopltk.com/explore/MRPos...
Daily Updates
linktr.ee/mrpostframe
Mad County Build Series 100+ Videos
• Mad County Build
Thanks for stopping by our channel! We are self building our family of 5 a post frame barndominium in Iowa along with the life we’ve always dreamed of.
The goal of our channel is to inspire others to build their dream by providing education on construction and an in depth look at how we’ve gotten to this place.
Email:
Info@mrpostframe.com
Mailing:
PO Box 11
Winterset, IA 50273
#postframe #barndominium #selfbuild - Jak na to + styl
![How To Install Base Trim For Metal Siding & Metal Wall Panels [Includes Cutting & Finishing Corners]](/img/n.gif)
Used this and a couple other videos on my polebarn project. Saved me a ton of time and effort. Thank you very much.
Thanks for sharing! Glad it helped
You are a great builder Paul! You pay so much attention to the little details! I've been learning so much watching your vlogs. I've been a subscriber since the mad county build series. We are getting ready to have our post frame house put up. We are going to have the building, concrete, spray foam, framing, & drywall done and do the electrical, plumbing, & finishes ourselves. I just hope I have someone as good as you build our post frame home. We are still looking for a builder here in Indiana. Thank you so much for being a great teacher. Nicole
Thanks for watching! Glad they've been helpful. Good luck on your build.
I am very frustratyed trying to cut metal trim for the first time. thanks for the help.
You can also bend the bottom leg for ends then make you tab and cut excess off I use similar trim with steel buildings both methods work all perspective
Fantastic tutorial. Very straight forward.
Thanks
Very very good. Thank you! Definitely using this method
Very nice Paul & guys, always love your attention to detail, it's the little things like these details that stand you apart from the average builder!
Thanks!
That’s what I call sheet metal origami. No amount of schooling can teach this, it comes with being a problem solver by trade.
Nicely done.
Thank you!
Question: I have white rat guard trim on a Barndominium and notice a bit of surface rust forming on top of the rat guard, under where the panels rest, in more shaded areas of the building. Is there a market solution for this or is the suggestion to caulk / silicone and paint to Rustoleum? My idea was maybe a piece of thin PVC angle that you could slide in between the bottom of the panels and top of rat guard, maybe 1/16" thick, to protect it long term.
Noice fix! 👌 sheet metal origami ❤
Beautiful job
Thanks!
Bro that is insane how good that looks! 💪
Отличная работа
Thank you
You're welcome
Excelente video 👍 saludos 👊💯
Gracias!
How do you make an outside corner with a gravel drip edge or a shingle drip edge?
Thanks man. Great video. Could have been a little loser with the camera on the cuts. But being a guy trying to get his building done for 3.5 yrs right after I lost my mother, you have been a great help and I love hank you. Cannot get anyone to do it for me, thinking everyone is just really busy or they just don’t want my money. Lol. So anyway, keep up the good work and have a blessed day!!
Look me up on Facebook and message me if ya u want so I can ask you more questions on how to’s. Lol. Thanks again
How you trim wainscot top trim where hits a door or Overhead door J-Trim
I have rat guard...but my barn is post and beam with gravel pad. What can I do to protect from rodents digging under. It has a 2x6 treated from beam to beam...40x60. I am in 4 foot frost .
Should I just dig out( but how deep and far and pour concrete over wire?
My contractor didn't put on any rat guard. Any suggestions for putting it on after the fact?
I know this is probably a really dumb question but could you put this along the ends of walls in an apartment to keep rats out?
Yes, that's on of the main reasons they are called a rat guard.
looks good to me, things that might help is a tin knockers hammer, it will work better than that nylon thing your using. might consider using a scratch awl to mark things but they are unforgiving if you make a mistake. I never did architectural metal only HVAC metal, but I made my own fittings generating them from dimensions with trigonometry.
Thanks! Tin knocker would definitely be helpful. Pica make colored pencils we need to try.
Tedious but great results
Thanks!
Paul what state are you in
Iowa
Show me how to properly trim a window pls
Is this product sold as rat guard trim I am going to build a lean to off the back of my garage using the ribbed steel and I don't care for rats
Yes, most refer to it as "rat guard". This piece of trim does prevent the entrance of rodents and insects, but mainly acts as a base for the setting of or metal panels. You'll see that we add this trim on top of a color matched piece of flat metal. That truly acts as our rodent proofing. When this building is finished dirt will be filled in to just under that rat guard trim.
@@MrPostFrame right on thanks for the info I will be starting this project in a couple weeks and I'm looking forward to chopping this stuff and making it look tight and pretty
.