Start Your Welding Business With These Tools!
Vložit
- čas přidán 30. 05. 2024
- #welddotcom
Start your welding business with these tools! Today we are going to talk about the tools you need to start your first welding business. In addition to the physical tools, like a welding machine and hand tools, we will also discuss the assets you can use in your area to help you set up your business and find your first customers.
Head over to our Website and become a free member: www.weld.com
You can join our groups and forums, ask technical questions, answer questions in the community, look for jobs and more!
Follow up on Instagram: / welddotcom
Visit our www.Weld.com/shop
Don't miss new episodes of our podcast, please subscribe and leave us a review!
Now available on these platforms:
Anchor: anchor.fm/welddotcom
Google Podcasts: www.google.com/podcasts?feed=...
Spotify: open.spotify.com/show/4qWd24Y...
RadioPublic: radiopublic.com/welddotcom-6N...
Breaker: www.breaker.audio/welddotcom
Brands that Support the Channel:
BOHLER WELDING: www.voestalpine.com/welding/
ABICOR BINZEL: www.binzel-abicor.com
ESAB POWER SOURCES: www.ESAB.com
EVERLAST POWER SOURCES: www.everlastgenerators.com/?r... AHP POWER SOURCES: www.ahp.com
COMEAUX CAPS: comeauxcaps.com/
Get your ISOtunes (OSHA / NIOSH Compliant) Headphones HERE: And Use our code WELD10 for 10% off isotunes.com/?rfsn=3712318.e7...
TubeBuddy: www.tubebuddy.com/welddotcom
Disclaimer: As an Amazon Affiliate and influencer, Weld.com earns from qualifying purchases via our posted links and affiliate links.
Videos produced and made available by Weld.com or any of its affiliates, subsidiaries, or representatives (collectively, "Weld.com") are provided for informational purposes only. Although every effort has been made to provide the most accurate and useful information from sources believed to be reliable, no warranty, expressed or implied, is made regarding accuracy, adequacy, completeness, legality, reliability, or usefulness of any information. As tools, products, materials, equipment, techniques, and applicable laws, regulations and ordinances are constantly changing, Weld.com cannot and does not assume any responsibility or liability for the accuracy of the information contained herein. Under no circumstances shall Weld.com be responsible or liable in any way for any content, including but not limited to death, injury, errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in a video, on a website or by other means, whether displayed by Weld.com, or a third party in its original or a modified form. All content is subject to Weld.com and any third party's applicable terms and policies. Carefully review all terms and policies.
ALWAYS USE CAUTION WHEN UTILIZING ANY DISPLAYED TOOLS, EQUIPMENT, TECHNIQUES OR PROCESSES. IF EVER IN DOUBT, CONSULT A LICENSED PROFESSIONAL. ANY RELIANCE ON THE PRESENTED INFORMATION IS STRICTLY AT THE VIEWERS OWN RISK. EACH VIEWER EXPRESSLY AND VOLUNTARILY ASSUMES ANY AND ALL RISKS INCLUDING, BUT NOT LIMITED TO, DEATH, DISABILITY, AND/OR SERIOUS PHYSICAL INJURY RELATED TO THE USAGE OF ANY TOOLS, EQUIPMENT OR TECHNIQUES OR PROCESSES IN THE PRESENTED CONTENT. IN THE EVENT OF AN INJURY IMMEDIATELY SEEK MEDICAL ATTENTION.
*Links to products in the Description*
@Wroger Wroger Only on weekends.
@Wroger Wroger Its 2020 not 1620,blacksmithing on anvil using bellows and hammer is a time of ancient past!!!Welcome to the future dinosaur!
Whats the link to that toolbox with the wrench, ratchet and allen set?
@@chuckhickman8093 Unfortunately, I don't have a link to that specific kit.
@@zumbazumba1 Mate, can you hear that źzzzz noise? He got you hooked and now he's going to reel you back in to the boat.
I suggest having multiple angle grinders, It definitely cuts down on time having to change back and forth from cutting wheels to sanding/wire wheels.
and good for redundancy. stuff breaks! Maybe we can't afford backup welders but a grinder is pretty cheap, but lif ewould suck if it broke on the job and you only the one grinder.
That's great advice.
3 small angle grinders and one big one.
Yup I have a bunch of routers for wood just like grinders. Just easier and faster
And high quality ones, 2 corded 4 1/5 inch with both preferably trigger grip like the dewalt in the video and atleast 1 maybe 2 cordless with a few batteries
As an attorney who does business start up and construction law, I really appreciated the legal and small business part of this video. I would add that a new busines should have their attorney prepare a template contract for you to use, to ensure you are in position to get paid, and to manage any liabilities if a problem on the customer's property causes a problem on YOUR work site (this plays right into the insurance piece.) A lawyer who does that type of thing regularly will have something in the can ready to customize for you pretty quickly, so it won't break the bank. Thanks so much for this video, I am learning to weld on the side along with my kids (safety first) and you are a great resource.
Teach 'em young! 👍
I can't explain how to thank you but you are really educative,I have learnt alot from this ,
how do you feel about ai being able to write out most contracts and business plans now? with specific prompts, ai can do some amazing things
This video is for welders (working men) not pencil pushing , ambulance chasing lawyers. 😠
@@steelrhinocerosno
Good heavy duty extension cords!!!
@jrg10332 exactly!
Learn how to do a Daisy Chain aka Electrician Wrap. No knot's, easy to store and it last longer! I have a 100' for over 10 years now and still works.
Could you recommend brands?
and all the adapters plugs for both ends!
also learn the stagehand cable wrap/coil.. how to over under a coil makes it easy to pull out and coil back to the male end
How long can the extension cord.be on a 120 mig welder.before theres too much power loss?
Ive had that issue before (with too long of 2 extension cords..
P.S still learning, but know that the shorter the cord the better So i ask how long at the longest, to still get decent power from the mwchine?
ADD: 2' rafting square.
Both Water based and chemical fire extinguishers.
Fire proof blanket.
If you damage a customers' property you're responsible.
At least an 8 lb. sledge hammer.
Offer FREE ESTIMATES and put that on your business cards.
I agree! Good comment!!!!!!
Good tips 👌👍
@Wroger Wroger The darkest day of my career (I'm retired now) I was welding on a small overpass and unbeknownst to me beneath the overpass were highly flammable trays of plastic. They caught fire and caused untold damage to the bridge and interrupted rail service during rush hour. That day I learned a very important lesson. Look first and be prepared to put out a fire.
@Wroger Wroger AMEN Brother.
Yup something to put out a fire is a must, sparks fly.
Air compressor, die grinder, air gun, air arc rods, work lamps, and maybe 1/2" electric drill. And the most important (I think), a complete first aid kit! (My 2 cents)
Air compressor is definitly ar least 8 gallon portable.
tape measure, center punch, good eye and ear pro. my wife is tired of me saying What and huh
Selective hearing
My Red beard is now white, Great Job encouraging a new generation of Craftsmen. Franklin Roosevelt once said if he had to work for a living that the first thing that he would do is join a Union, think about it.
As you have been the worker/labor, truck driver , estimator , fabricator, erector, Business man, owner. I Went to the Welding school, and Trade school and a Union apprenticeship. Then twenty five years later I was that Union Representative, assisting the Contractors, helping younger ambitious men to become that Contractor.
Your doing a great job inspiring the next generation.
I will be out there Organizing them, helping them to have the skills to feed, provide health care, and retirements for their families.
start at a local shop, take note of their tools most used.you can buy a used trailblazer or Lincoln for almost the same price as a generator/multipurpose welder. I've never in my welding career used a porta-band or needed one. if going mobile, id recommend multiple grinders and add 20'-30' of cord. 3 to 1 cord adapter. hyperthermia plasma cutter and 15 cfm air compressor. a mig suitcase. selection of most used filler wire/electrodes/mig wire. I personally use a lot of 309 and 5356. spool gun aluminum... the most common question I get after saying im a welder is "can you weld aluminum" yes tig and spool gun/mig. learn all types of welding and be proficient in every process. Learn the type of welding your region needs, it might be marine, construction equipment, sanitary, pipeline, iron worker/ I Beams, mines, quarry's, aesthetic, handrails, interior finish work etc etc so many tools, I got a truck and shop full but it all started with a oxy/acetylene torch and brazing rod a long time ago.
Very good detailed comment.
ecr125x ... I'm a new MIG welder. Thank you for the information.
You seriously haven’t used a portable band saw in your career? It’s one of those tools where the moment you use it you will always want to use it. Need to cut off a corner of an angle that’s on a trailer? Or cut some 2 inch pipe that’s on the other side of the shop that’s away from your stationary cutting band saw, or you don’t use that either? The great benefit of band saws is that it doesn’t create sparks, they are very quiet compared to other cutting processes, you can cut much bigger pieces, and most of the time they are clean cuts. I could name at least a dozen more. Do yourself a favor and invest in one.
I built a stand for my porta band so I can swap it to a vertical bandsaw. Since I bought a evolution saw it hasn't gotten much use.
@@gaphoogys Band saw can cut things faster than a grinder, straighter, with no sparks. While a plasma cutter could literally cut faster, the setup time for the portaband from I-need-to-cut-that to CLANG is the fastest.
I like the Miller welding app it tells you what amp, rod ,polarity , feet per minute and so on .it is a great resource to me. Thanks for the video 👨🏭
Now that you have all this stuff, let's see some tool trailers and welding rig setups!
Yes! Show us a few examples of mobile setups that you think are really well put together.
this
Yeah, Im just a noob, but a "little genny" of chinese origin is NOT gonna weld it. I have 6500W peak, but it was huffing on 240v with a invertor stick welder set to 100amps. What type or size would actually work for 200amp setup?
Yes please and a recommendation and guide on what to look for on a generator ? Thank you for all the knowledge.
I say buy the PPE first, then the tools. Two reasons, one it reduces the risk of starting work without the PPE, two PPE changes less than tools. They come out with new tools constantly and you are always going to want the latest, so put off the tool purchase as long as you can.
Buy used tools.
I’m happy with my tools made in the 60’s
Its 7 must have tools,,, he mentoned ppe very good even if it was out of topic,,,,agree ppe all the way, nearly lost a eye and got 20 stitches in my face,, so dont be stupid were them
I just got a Speedglass with adflo. I wish I had the PAPR 5 years ago, and I'm a farmer not a welder
If you want to run your own business I'd suggest taking a few courses on project management, estimating, scheduling and basic bookkeeping/billing. Having an accountant to figure out your taxes is good and all, but you have to get paid first and managing your cash flow in and out is vital for that. You also need to know if a tool or piece of machinery is making you money or costing you money, especially if financed.
Very true a two three month's night course at a collage will get a person on there way on business management.
Hallelujah! Finally someone who recommends the guard on the grinder. That’s how I was taught 25 years ago and never used a grinder without a guard. So many CZcams videos of lazy people who can’t be bothered with a guard.
@Mar K. You are 100% right . In Brisbane Australia June 2021 a man using a 9” grinder with no guard bled to death in front of quite a few people. My mates daughter has a friend who witnessed it . As a tradesman removing any safety feature of a machine voids your insurance if you or someone else gets injured . Not worth it just to be cool like the wankers on the car shows .
Many of them will be sorry as time emerges and they finally realize that guard was there to save their finger hand thigh or worse lol. Absolutely. I had a close call that woke me the hell up. A blade exploded in all directions with a piece rapidly striking my safety glasses thankfully I was at least wearing them. It ain't worth the risk.
all people using grinders don't use guards in my place. no one uses, no one sells. that's why I can't find any guard for cutting disc anywhere to buy
I will use a grinder with out a guard if I have to but Ild have to wear gloves and a face shield n glasses to even get close to winding my self up to actually do it lol
@@hoangnguyendinh291 Have a look ebay or amazon there are a few to choose from, just match it to your grinder.
Number one : You need to spend some money to make more money . Number two : Good work ethic & Confidence . Number three , never ever ever use a grinder without a guard .
All good points
I've been welding, grinding, and cutting, for over 23 years. Everytime I've bought a new grinder or even used someone else's grinder, the first thing i do is take off guard. It gets in the way. Never been tagged by grinder or cutter without guard. You just have to be very good at grinding and cutting. The angles and tight spots I find myself grinding or cutting in, make it impossible with guard on. No such thing as accidents. Pay attention always on anything and everything you do in life, and won't be no accidents. A lot of jobs or proffesions dont get the privilege of accidents and having to learn from them. As it goes for them, its 1 and your done!!!
@@dboy8790 that is great with you however there is a first time for everything and it is still dangerous
@@markjacobs4296 I cant argue with that.
as much as possible i dont use angle grinder...specially in cutting, good advice about the guard..
Great advice, as always. I had two businesses, and I can say that your legal advice is spot on. Many people wanting to start a business in welding don’t understand that this is a real business, not a hobby that someone just barely understands, or is not quite competent to do.
So one last bit of advice I can give is that before someone starts a business, make sure that you can actually competently do the work. Puttering in your garage for three months, as some people on You Tube recommend is not enough to take on paying work, or any work, for that matter.
Mel Gross I say work under someone or a few different people for a decade or two then start your own company.
Also taking some courses would be a really good idea. Even working for someone,which is a good idea, if they would hire someone who knows nothing in the beginning, wouldn’t always lead to a person learning good habits and getting proper information.
Have a look at 'the competition in your area' usually a quick internet search reveals there are well established companies already doing what you are thinking of doing as a business, and don't forget some want quality and will gladly pay extra for it but most just want the cheapest fix and will go down the road to save a buck.
Your advice on PPE is imperative, Im a retired Registered Nurse , and you would not believe the injuries I've seen and 90% of them could have been prevented, so you made a great point. I've been a hobby welder for 45 years and you forgot one of the most basic and most necessary tools, wire wheels for your angle grinder for pre welding cleaning and post weld cleaning, but great video with a lot of good points.
My only suggestion:
Learn how to build tools into the job. Bid jobs with a new tool in mind. We always bid consumables, but
I might have missed it in the video but a bunch of different pry bars really help too. I like the ones made with the metal caps on the handle so you can hit them with a hammer if needed.
Combo square! As a noobie fresh out of welding school, I use my combination square more than any other hand tool in my welding/fabrication job. Super easy to get a 90/45 at any length, and the built in level works wonders
Good list overall. The two things I would add would be a magnetic drill and a CO2 fire extinguisher. I really like your channel.
Thanks for the support
CO2 Extinguishers are GREAT.... to avoid the disasterous in some situations , white rain of shit from dry chemical extinguishers. And yes........ right........ dry chemical needs to be 2nd line of defense there for oil fires or whatever CO2 wont put out. I bought probably 30 CO2 44 pounders for $100 off ebay where some body removed all from a plant, they are around used and full you look. Most fires can be nipped with a bucket of water and a drink cup without setting off a "real" extinguisher
A magnetic drill is worth it’s weight in gold for all holes over 10mm / 3/8” especially in thick steel quick , easy & accurate .
As to my additions to the list, I would recommend a sawzall for cutting pretty much anything in tight places where you can't get the porta-band or there is a fire hazard using an angle grinder with the sparks. I would also recommend a leather welding apron and chaps because an angle grinder that kicks back with a wire wheel will go right through your cotton welding jacket. If you're just TIG welding and protecting from UV, a welding jacket is fine, but when you're blowing hot slag out the bottom of a cut with you're oxy-fuel rig, the jacket isn't gonna do much.
That's some very good additional tools/equipment there.
I came here to say Sawzall, one of my most favourite tools, just so versatile.
Experience has taught me that a grinder starts more fires than torches and welders, also farther away
@@sheilamclaughlin963 Yes indeed. And in a sneaky way at that. Those sparks just hammer away at a concentrated spot if not blocked off properly.
God. I can't even count how many fr jackets I set on fire...
When you asses a job, how do you determine what you will charge? Some jobs take a lot of prep to weld about an inch or two, while others take no setup time but need 3 total feet of welding.
Get what you can, where you can, whenever you can get it. Old rusty tools clean up quite nice on a pedestal grinder and some solvent.
Another tool suggestion: fire extinguisher and extension cord, extra can of gas for generator. Great video and bonus tips! Thank you!
Do a construction calculator instruction video for the welding viewing folks please.
A very helpful video with solid, well-founded advice. Thank you.
One suggestion from an old-school journeyman who has tried to become capable in all the diverse aspects of welding: Also become proficient in oxy-acetylene welding, brazing, and cutting.
Sometimes, especially with dissimilar metals, the oxy-acetylene torch with flux-coated rods, can be an asset.
Good advice 👍
So glad to "hear" you say ear protection. I'm 50 (50 isn't old) and have to wear hearing aids because of running grinders and saws all the time without hearing protection. I would rather be without a couple fingers than my hearing! It sucks being deaf! The things I haven't heard my children say, not to mention having to ask customers to repeat themselves. WEAR EAR PROTECTION!
Thanks for all the tips and tricks.
One thing I do as a business is the way I present myself. Been a contractor I'm always diplomatic and every job is easy.
They ask can I do this job? Yes I can.
My engineer friend said don't say but. Because but has a stop in it. No client wants to hear but. A client wants to know if you can do the job. Yes I can. My father did tenders for jobs. He was a builder. One of the specifications of the job was to carry work out to the best of your ability. You tell your client you will carry work out to the best of your ability and give them advice. I think that is selling yourself because you need to market yourself. I don't ever get in an argument with a client. Not ever. I have however had trouble along the way. I think before you even start a job you will know if you have trouble with a client. It doesn't take long so if this happens you need to make sure you get paid. That is tricky. I have always got paid because I make sure my work is always good so they cannot complain. Don't ever fall for I don't care if it isn't first class because they can sting you.
A building consultant I once worked for when they were builders told me. One job they wrote up a contract and was approved. They were to start on one morning. They weren't there first thing and the client called them and started getting angry. The builder said we are not doing your job. The client asked why not? So a good work relation is always important and not to be scared of asking money. You need to know when you get your money. You finish a certain stage. We all need money. It's a reason we stay in business. You do good work, ask money and then you know where you stand.
I use a simple plum bob a lot. Also, I use a broad-tip, blue Sharpie to highlight places where I'm going to scribe a line with a carbide scratch pen. Blue Sharpie ink works a lot like Dykem, but much cheaper
A good, double sided file works wonders for a lot of prep and cleanup when it comes to welding along with a set of philips and standard head screwdrivers
I would avoid getting loans, borrowing money and especially avoid an overdraft. The latter can be called in (demand for immediate full payment) at anytime when the lender wants it all back. Buy good quality used equipment from sources like Bidspotter and ebay. Remember, if you borrow money you are responsible for paying it back and it will be you that looses sleep and gets stressed when the work runs dry and the money runs out. Better to struggle and build up using used gear first before buying in the flashing new stuff. 90% of the gear in my van was sourced secondhand and the new stuff from closing down sales on Bidspotter. You can even buy consumables like welding rods, mig wire, cutting and grinding discs and all manner of equipment on Bidspotter. And if you are not under stress to pay back a loan, you will enjoy your job because you are relaxed! Good luck newbies.
Ben Franklin said it best, "never a borrower nor a lender be". True then as now especially with tools , books , etc.
Respiratory protection ! cutting welding always protect your lungs.
Yeah especially for stainless, since it produces hexavalent chromium
Very very true! It's amazing when you "Just do a quick grind of some welds" and you run a tissue in side your nose and it comes out black.
I inhaled that crud for 55 years and still going (so far) 75 now and thinking about coming out of retirement.
@@braunreinhold6020 God loves you Sir...
@@braunreinhold6020 I know people who have smoked 30 a day for 20 plus years, some people are lucky, some people get the worst deal. Minimise the chance of you getting a bad deal/painful death.
The “bonus content” was some really good info! Thanks for sharing 👌🏼
This video has a lot of information here that can keep you out of trouble on a job. Very good way to get the word out there keep it going buddy.
Another great video. Thank you guys. I think these should be given, but no one ever seems to have them.
1. A high quality fire extinguisher.
2. Pen light's, flashlights, LEDs, stand lighting, etc. You can never have enough light; and spare batteries and bulbs.
3. An actual first aid kit. Band aids and napkins only go so far.
a good MAP Gas torch for those press fit things, axle splines, nuts and bolts... etc.. that are rusted.... 30 bucks max for the torch and a bottle of gas will save hours of work....
MAP Gas is Horrible , it takes twice as much as acetylene does .
@@markjacobs4296 I have used MAPP and acetylene with no real preference. If you are going to tig or thermite after cutting go MAPP as it is cleaner.
Mark Jacobs if someone is just starting out propane or map gas is cheap and affordable. i actually prefer propane/map when working on cast aluminum since its easier to maintain the right temp range
@@MySuperman112 good point
While I can weld, I don't consider myself a welder by any stretch, but what works much faster and much easier.... put a quick tack on one or two sides of the nut your working with. It'll almost walk itself off after that.
That's some great advice towards the end, I'm looking at starting my own welding business come spring, I'll definitely be revisiting this video 👌
I've been welding for 40 years
Im a heavy equipment mechanic
But I've certified in 6010 7018 and wire feed certifications, can weld aluminum cast iron stainless t1 tool still brazing ext have all the tools been thinking of starting my own business. Just have to pull the trigger
I've taught many young men to weld
I would use a set of hole saws as a stable set in working with metal and timber
Great job with the set up
Keep up the great work
I like all the details that almost seem trivial, like the the pen & paper. Thanks for another good video :)
As far as must have tools I would say a couple of come alongs. They are so useful for pulling, spreading, lifting and just about anything else for moving materials
Thanks Red, that's a ton of info you provided...for free! Yeah, as some have mentioned there are other items to get but geez, you did a great job in getting things started. Thank you! Appreciate the effort and knowledge you continue to share. Be safe!
Red Beard, sir thank you so much for educating us beyond what’s expected. You are a “weld” above the edge dude!!!
I'd recommend a string/chalk line and plum bob.
Good information on beginner needs, But it s difficult to cover everything needed since there is more than one way to accomplish a task. By trial n error will be a major factor, DIY jigs .
i started with a Lincoln 140 mig on mobile repair and light fabrication. I have built 5 utility trailers, 2k up to 3500 with it,
metal gate repair is probably the easiest come up.
By the way. Excellent PPE discussion. Thanks for doing that. Too many kids think they don’t need that.
Used to be a structural plate fitter for 18 yrs. built some amazing huge projects. Got outta the trade and miss it after a few years, still got all my tickets tho! Steel workers rock!
Great video. The portaband rocks! Don’t know how I lived without one
As for the guard on the grinder- love that tip. Drives me nuts how people take them off Those are some of the worst injuries I’ve seen and often totally preventable
In my area, there is a program called S.C.O.R.E., Senior Core Of Retired Executives. There are at the local Camber of Commerce. They help people start and improve businesses. Really outstanding people.
they just want to direct you to the SBA moneylenders
@@Sunrayman123 ???
Red Beard, sir thank you so much for educating us beyond what’s expected. You are a “weld” above the edge dude.
Love the way you focused on the PPE and reasons. Great on you
A good Mini sledge hammer really helps to move stuff out of my way and extra lenses for your welding hood
I've got just about everything mentioned in this video but what I really think would put me at the next level would be a cnc table for my everlast plasma cutter. I really think that would make my business go bang busters.
Some kind of working bench/table!! Awesome advising!
My leather welding sleeves w/bib from the late '70s are still protecting me! I really should get a welding jacket, too.
I also suggest a fume extractor for all the Fumes and gas are created by a welding operation ... i know its expensive and cost a lots but believe me guys it's for your own safety you will buy it for your Health to keep going on a safe Way ...
I bought a papr and I only weld from time to time... I love it except when I have gas.
I started welding as a hobby. O boy am I happy with that grinder safety video of you guys! Cheers
One tool i would add to that is a couple of cold chisels, one nice and sharp the other with a radius ground on the end so it won't cut . I find these useful for cutting tack welds, removing stripped or rusted nuts where a grinder can't reach or where using a torch is not possible and the blunt one for for distorting a tack weld that has pulled a part out of alignment too far . I used to have 4 off 3/4 unf bolts with inch long nuts that went from 1 inch up to 4 inch that i used as jacking bolts, i have lost count of how many scrapes they got me out of !
You need a 12 inch rule or scale in your toolbox as well ! Serves as a measuring tool, straight edge , back scratcher, scraper, coffee /paint stirrer and comes with a lifetime man cub protection policy for free ! Just crack him across the knuckles with the edge of the scale if he goes near your toolbox and he won't ever come back !
0:00 Introduction
0:20 Staring a Welding Business
0:49 Portable Machine & Generator
1:26 Expand Your Horizons
1:50 Tools / Cutting
2:54 Tools / Angle Grinders
3:49 Cutter / Cutoff Wheel
4:09 Polisher / Zirk Wheels
4:26 Grinder / Hard Rock
4:53 Drill / Impact
6:03 Tools / Hand Tools
6:22 Wrench Set / Allen Set
6:50 Measuring Tools
7:16 Marking Tools / Mark All Pro (recomendation)
7:39 Hammers
7:46 Cutters & Welding Pliers/Welpers
7:56 Finger Clamps / C Clamps / Sliding Clamps / Sheetmetal Clamps
8:26 Calculator
8:55 Pen & Paper
10:00 Personal Protective Equipment (PPE)
10:10 Welding Hoods
10:33 Face Shield
10:44 Hard Hat
10:55 Welding Cap / Welding Gloves
11:10 Saftey Glasses / Ear Plugs
11:32 Welding Jackets
12:41 Be Legit
13:00 Hire an Attorney ($400)
13:22 Local Business Development Center's
14:11 Insurance Agency
14:30 W-9s & Tax Hire
14:57 Folders / Business Cards & Marketing
16:00 Conclusion
GREAT POINTS Bro! Wish you were around 30 yrs ago when I started my general & electrical contracting biz...all your points cross over very well with other construction work! I'm now starting to do small in shop welding/steel work...I've had to start over after a stroke took me out 8 yrs ago so I have to do small stuff where I can sit at my bench. I've had to teach myself how to weld and work the metals. Your vids have helped me out WAY more than you'll ever know and I whole heartedly THANK YOU!!! :)
Thanks for the support 👍
Hey brother great video man!! Thank you for the solid advice! I like how you put the folder together and have everything in it ready to rock!!
thanks a lot👍🏽👍🏽-high school senior in a welding class
Didn't see a string line in that collection Big Red? Plus a photo album of work projects is a good talking and selling point.
Good points
I would recommend a Die grinder & Rotary tool for cleaning and grinding tight spots or delicate applications you're working on. Also a Metal Combination Square with a level attached on it.
Tons of great info for the new guy just starting out! Good Job!!
A relatively cheap alternative to having to run a generator to run your welder is to make up 4 adaptor chords. 1- male 30 amp 3-wire male plug old style reisdential dryer plug (NEMA 10-30P) to female 3-wire 50 amp receptacle (NEMA 6-50R), 1- male 30 amp new style dryer plug (NEMA 14-30P) to 3-wire 50 amp female receptacle (NEMA 6-50R) and don't worry about the neutral lug, 1 - 50 amp 3-wire old range style male plug ( 10-50P) to 3-wire 50 amp receptacle (NEMA 6-50R), and 1- 50 amp new style range 4 -wire plug (NEMA 14-50P) to 3-wire 50 amp receptacle (NEMA 6-50R). As just about everyone has an electric dryer or range. You can pick up all four 4' or 6' molded end appliance cords at the hardware store where all you have to do is put the 50 amp NEMA 6-50 receptacle on them. I have been doing that with my portable Miller machine for years. Also make a 50' 8/3 rubber chord with the 3 wire 50 amp receptacle on it that you can go directly in the panel and borrow the range or dryer beaker to temp in power in a matter of minutes. I would also suggest having 2 pole 50 amp breakers with you of the common panel manufacturers (they're not expensive either). I'm an electrician by trade but also repair equipment. Hope this helps.
Great content thanks weld tube.
A good measuring tape. Love the video very helpful.
Have at least 5 tapes. So when you melt the first 1 ,cover number 2 in 6010 spatter drop number 3 off a 50 foot platform ,then you have number 4 with a backup
I'm taking an accelerated class that's teaching me all forms of welding soon can't wait to start!
Polystrip discs for grinders are great for removing paint without marring underlying metal like would happen with flap discs. Also, if you're doing cast metal repair, a dye penetration test kit is good for finding otherwise invisible cracks.
If you’re going to be working with large sheets of steel, you can’t beat a 48 inch drywall square
Magnetic base drill is a must
Yes. If you have the money it’s Smidt have!!!!
your right but not for start up , they're 2grand and you haven't even bought the cutters yet
I spent €400 on one and €100 worth of cutters. You don’t need the most expensive one on the market to get going.
I hear hougan makes the better ones, but i got an evolution mag drill for about $450 and it works well, i cut 1-1/8” holes in stainless just fine. Just need lots of cutting oil and time to let your annular cutters cool.
I work on a bison farm and bison absolutely destroy fence, grain wagons, creep feeders, corrals etc. Since i have taken up welding about a yr ago i have made alot of money doing the repairs and also saved the buisness money too. but more importantly i have LEARNED soooo much.
Great video! Love the details and recommend gear! Really liked the paper work And licensed part as well,great job! 👏
You also need to get a right handed pipe wrench and a pipe stretcher.
Lmao... Stop it.
Add a metal softener and you're cooking with fire
@Jedidiah. 👍😃
Don't forget the Cybertruck! :D
Good common sense and the ability to know what you're doing in the job at hand- fabricating, welding, layout and installation. Most of the time I need a circular saw to make concrete forms and temporary braces, rotatory hammer drill and red heads, ladders, saw horses and a laser level. I've fixed and finished the jobs other people couldn't do. It's good to have carpentry and masonry knowledge and to follow the local building codes. And a magnetic broom to pick up all the small metal cutoffs. A clean jobsite is always safe.
I’m a big big fan of chordless tools for mobile work. I do everything out of the back of an SUV and let me tel ya, I’m so happy that extension chords are not being a problem
I’d say also jack stands few ratchet straps or a chain comealong extension cords and a vise
Locks! Thief’s are everywhere and they love welding equipment. Be aware of the area you are in. Also a fire blanket and extinguisher.
Any particular brand or lock sets to keep your tools save & organized?
Really helpful videos guys. 14 here and welded a few times, love it and want to get into the trade.
I will never start a welding business myself,too old for the enterprise.But a great video clip,tons of useful,no nonsense advice,flawless presentation
Add a first aid kit - it's only a matter of time. Fire extinguisher - no matter how safe you are, fire can happen.
Fire extinguisher. Setting your shoes on fire is requisite. Setting customers shoes alight not recommended. I find a garden pump sprayer is handy for cooling metal or pre-wetting nearby to kill sparks. Avoiding insurance claims and bad reviews is good business.
Sir, could you explain what you mean by insurance claims.
Thenk you
I didn't see anyone mention wire wheels and a good chisel / punch set. Inexpensive and invaluable. Great video!
Multiple grinders. I like 4. A cut off wheel, hard wheel, flap wheel and cup wire wheel. They are so cheap you can just reach for the one you need and not have to change disks all the time. It also helps when you want to use the wrong disk for a job, like using cut off wheel to dress up an edge.
Good knee pads (I didn't and now they're shot)
good call, the older i get the more I appreciated some good knee pads.
The jokes a young man has to hear for wearing those in this trade!!!
Step 1: Learn to weld
Nah U skipped a step U gotta rock the grinder first
Excellent all-rounder. Kudos for the proper PPE!
Just my humble 2 cents here...
With a small suv, like say a honda crv, you can get into stainless steel restaurant repair. Simple screw drivers, a drill, driver and hand grinder are all you need. Cordless are preferred but not necessary. A $600.00 tig welder from everlast, small bottle, and custom made welding rig are all you need.
$2000.00 tops and you're in business.
Great Idea j paps , thank you
@@davidlawrence8085 good luck on your business. Its virtually fool proof. Remember, keep your overhead very low.
Hard Rock wheels can’t be beat when it comes to thick rust or paint on repair jobs. The flap discs just get too gummed up.
I could definitely recommend Learning as much different welding methods possible. I learned MIG welding, that's all I can do well, not very convenient. Good tip. Also a couple buffing disc to make a good polished finish. I own one "expensive" automatic welding mask and a HBM automatic welding mask as backup, they're decent enough for the cost. Also some welding sleeves and a good apron, this way you still look cool and stay cool when you're not welding in summertime😎. I also learned and grew watching this video, thanks 👍
I really appreciate this video, learnt so much in a short time.
Y’all please don’t buy crazy amounts of tools without talking to a partner if you have one, money is tight and ya gotta be careful.
Ok im telling my wife you said i could buy more tools.
Plumber's fire insulating pads; they have saved my forearms and hands. They also help shield when welding/grinding/cutting/soldering around wood
"Very good" info for the starting new business, Good luck.