Harbor Freight Cement Mixer Assembly Guide
Vložit
- čas přidán 1. 08. 2024
- Are you ready to assemble your Harbor Freight 3 1/2 Cubic Ft. Cement Mixer like a pro? Look no further! Join us in this comprehensive assembly guide where we break down every step, making your cement mixer setup a breeze.
Assembling a cement mixer might seem like a daunting task, but with our expert guidance, you'll have it up and running in no time. We'll take you through the process, providing valuable tips and insights to ensure you get the most out of this versatile tool.
Electric Concrete Mixer 3 Cu Ft
amzn.to/3QpRHy8
SAKRETE | High-Strength Concrete Mix
amzn.to/48YoEsw
(00:00) - Intro
(00:20) - Unboxing & Required Tools
(00:37) - Step 1 - Attach the Triangular piece to the U-shaped piece
(01:09) - Step 2 - Attach the Handle piece to the U-shaped piece
(01:23) - Step 3 - Attach the Wheels to the bottom of the Triangular piece
(01:48) - Step 4 - Attach the Lower Drum to the top of the U-shaped piece
(02:22) - Step 5 - Attach the Control Plate & the Control Arm
(04:07) - Step 6 - Attach the Top Drum to the Bottom Drum and install the Paddles
(05:31) - Step 7 - Attach the Rear Motor Hood, Bucket Pulley & the Motor Bracket
(07:30) - Step 8 - Install the Motor
(08:16) - Step 9 - Wiring the Switch and attaching the Front Motor Hood
(09:34) - Test the Mixer and outro
On Tiktok
@vasquezvip
Shoot us an email!
brian@vipholdingsinc.com - Jak na to + styl
Your's came with hardware organized into bags? And all the hardware fit the holes? And all the instructions were included? LUCKY!!! Thanks for the video.
🤣 Welcome to our channel!
You’re a goddamn national treasure for making this video Thank you!!
🤣🤣🤣 Thank you, and welcome to our channel!
Great video. I must have gotten one that was returned as it was missing assembly instructions and the bags were all dumped into one. Your video helped a lot! One thing I would have done a bit differently was mention what washers were used at each step. I was able to guess most of the time, and it works great.
I'm so glad it was helpful. Welcome to our channel!
Mine had instructions but all the hardware was in 1 bag. Except for the coil spring which was inside the handle. But not convinced mine was a return, the packaging looked pristine. Of course Im not done yet and I dont have remotely as many nuts and bolts as that list shows. Fingers crossed.
I would take it back and make sure you get one with the right hardware. It's hard enough to put it together with everything. Don't put yourself through that. Welcome to our channel!
@@VIPHoldingsUnfortunately I bought it last year and they would probably balk at that. I wound up 2 rubber seals short, had to use 2x 20mm bolts instead of specified 15mm and had 20 extra pieces. Plus mine had pieces already together (the switchbox wiring for example) that your video didnt reflect, but it looked professionally done. Made it kinda tough to put the housing on with it all wired together. Wound up using the box on its side to support the housing with a couple of bricks under the wheels to lift it high enough to clear the box to give access to tighten the screws.
@natehill8069 Sorry to hear that, but it sounds like you MacGyvered it to get it to work for you.
Great Video
Thank you!
had two bolts in bag 12 left over
Were you able to get it assembled? Welcome to our channel!
@@VIPHoldings yes, thank you very much. Those are the best instructions I have ever seen on youtube. In fact, it rivals anything instructional video wise I have seen or used. I'm going to be posting this video on Facebook so others can use it.
@kdubyaw3246 Thank you so much! We are in the process of branching off our travel videos to their own channel and being able to focus more on videos like this one for this channel. We appreciate you so much.
I had missing hardware too but not hard to replace, just inconvenient. Also, you don't need to mess with the electrical anymore, it's already done. One more thing if anybody decides to buy it, the hardware all come in the same baggie. LOL have fun.
To be honest, I don't know if I had missing hardware 🤣. The instructions were so bad I couldn't tell which was which so I just put them where I "thought" they should go! Welcome to our channel!
@@VIPHoldings Same here. I have hardware left over. I'm not sure if it's the wrong size or I put something where it shouldn't go. That was a frustrating day.
@johnseitz4977 My hardware came in bags but weren't marked properly and I had several things left over. That's when I knew this would be a good video 😁. Welcome to our channel!
one thing I did was to lay out all the bolt bags and look at the drawing of where the bolts go. I took 3 days to put it together working on it for a hour or so.
Sorry it took me so long to reply, your comment didn't show on my phone. Though it didn't take me 3 days, it was a pain in the butt! I honestly believe they gave me some wrong hardware but in the end... it works really well! Welcome to our channel!
I have already assembled mine before watching this. Several important details are left out.
Don't be shy, please let everyone know the "several important details " are. This video was created to help people.
OK, mine's together. Was short 2 rubber seals, had to use 20mm bolts in lieu of 15mm and had 20 assorted parts left over, mostly washers. Sounds like the engaging teeth need grease, or maybe graphite. There was a big scratch that someone touched up with not-quite-the-same-color. Had to go get gasket sealer, which I had never even heard of before.
Took me about 4-5 hours, not counting a trip to the store. About 3 hours of that was going back-and-forth-and-back-and-forth-and-back-and-forth-and-back-and-forth-and-back-and-forth-and-back-and-forth-and-back-and-forth-and-back-and-forth-and-back-and-forth-and-back-and-forth-and-back-and-forth-and-back-and-forth between the picture, the parts list, the instructions and the exploded view on EVERY STEP to figure out what they really meant by what they said and then try to figure out which piece was #56 etc.
3:30 My version (bought late last year but just now getting around to building it) does not have a bolt to tighten the spring, you just compress it by hand as you install the bolt. Which is awkward, so I left the plate loose so that it could be pushed back by the bar and then tightened the plate after the bar was in place. Would be just AWESOME if the hardware was in little numbered bags instead of 1 big bag.
Agreed. Plus, the instructions weren't exactly... clear. Welcome to our channel!
Mine worked great but has been sitting for about a year. Now I can’t get the switch to work. I noticed the yellow tab on the switch is missing. Is that some sort of safety? maybe the switch just isn’t working anymore.
I actually don't know about the Yellow tab and I'm currently traveling abroad so I can't go check mine but you can put a meter on the switch wires and see if your switch is dead. Sorry I couldn't be more help but welcome to our channel!
I was thinking now to remove the tube and put thread lock on the gear tube bolt. Not going to use it till Spring 2023 so I can do things to it, was thinking to put better tires and axle on it. thanks for your time
Sounds like you're going to give it a complete overhaul. Let us know how it turns out. Also, welcome to the channel!
I did remove the tube today , oiled the bearing that the tube spines on, did lock tight the screw that hold the spine gear, I put antiseize on the shafts, threads so later I can remove items . going to made a wood pad for the front stand and rear of the mixer to sit on keep the rear tires off the ground
Qué medida de Valero lleva🎉 revolvedora
Qué medida de Valero lleva de la polea la que da vuelta a la olla
No hablo Español. And Google translate sucks. Sorry
Good video for getting most of the assembly put in the right places but they forget to verbalize parts of their process
Welcome to our channel! What did I forget? I try to get everything but do make mistakes from time to time.
Do you have to adjust anything when you lower the drum into the stand? My scenes uneven and does not fit both sides. Only one size fits the other is too far away. 1:50
No adjustments required. I would double check the U shaped piece is put together properly. If so, see if something is bent. Welcome to our channel!
@@VIPHoldings thank you. Had to take it back for replacement. Seems I was just lucky ha
Oh, that sucks! Good luck with the new one 👍
I purchased this mixer from Harbor Freight. My hardware bags were not numbered like yours. They were mostly illegible. The directions really do suck. There were missing hardware also. The hardware you used on the paddles are not like what my directions indicated. Mine doesn't have the orange oval bracket for the motor mount either. Just a chrome looking bar with two holes in it.
This product has by far the absolute worst instruction manual ever, especially for having soo many similar size parts (listed in metric with very innaccurate quantities listed)
Totally agree. That's why I created this guide to help everyone else having problems putting it together like I did. Welcome to our channel!
@@VIPHoldings thankyou your video helped A LOT. Getting that gasket on was a real trick, unfortunately i had to do it twice as i didnt have the two halves lined up before i saw your video. Thanks again!
@zebfischer6088 so glad we could help!
Thanks for the video. The product came with the worst directions ever I will never buy this brand again because of it.
I agree, the English translation wasn't very good. As far as the product goes, mine has been pretty good. I've had it for about 2 years now and used it about 10 times. You definitely get what you pay for, but I only use it for smaller projects, so hopefully, it will last a while. Welcome to our channel!
You saved me from the nightmare instruction that come with this otherwise (not too bad) Chinese piece of crap. I can’t believe central machinery expect people to be able to find their way through the none sense instructions..
I'm so glad I could help. Welcome to our channel!