FORD DOOR LOCK CYLINDER REKEYING KIT
Vložit
- čas přidán 25. 08. 2024
- CASH APP: $PAYMEMONEYMIKE
Ford Door Lock cylinder
Part Number: 7C3Z-1521990-A
, 8l3z-1521990-c
Compatible with vehicles:
Ford Excursion 2000-2005
Ford Expedition 1997-2008
Ford Explorer 2-Door 2001-2005
Ford Explorer Sport Trac 2001-2010
Ford F150 1996-2009
Ford F250 1997-20015
Ford F350 1997-2015
Ford Thunderbird 2001-2005
Lincoln Blackwood 2002
Lincoln Mark LT 2008-2009
Lincoln Navigator 1998-2008
VPG MV-1 2012-2014
If you need any help, or have a question please leave a comment or email me at lilroxx001@yahoo.com thank you please subscribe!!
Never thought I would be searching up a video about this let alone never thought there would be a video about this but you made it beyond easy thank you so much
Glad I could help! Thank you
You sir, are a gentleman and a scholar. Your dexterity is impressive and beyond reproach. It took me over a 1/2 hour with BOTH hands. But you explained everything very clearly. Thank you for tutorial, you saved me $45 at the dealership for just putting in the tumblers.
Glad it helped!
Dude! Your tutorial was so easy to follow. I had to do 2 cylinders because someone tried to break in and with your video it was so easy! Thank you.
Thank you brother im really glad you found it useful!
Yes, he's just about the best. Thats why I subscribed AND JOINED his MEMBERS ONLY club.
i am so impressed that you did this with one hand holding a camera
Hehe thank you!❤️
As always, I just want to take the time today to say Thank you! I had 2 door locks to assemble today for a 2005 Ford F450 6.0L. This video prepare me before the job and made everthing very simple. Again Thank you for everything.
Brother im glad it helped you out!!:)))
You are a very good teacher, one of the rarest of skills. It's one thing to know a trade and something far beyond to be able to teach it. Excellent.
Thank you sir!! God bless you!!🙏🏼🙏🏼❤️❤️
Thank you very much for this video. My truck was broken into and dealer wanted 800 to do this. I purchased the kit you showed and a savage yard handle and did this for $70. This is a great video and easy to follow. Thanks again
Awesome Mark im really glad my video was able to help you out!
Good Job
Thank you!
Somebody tried to steal my 2000 f150 and when you buy this piece it seems liek rocket science. You made it easy and looking down at the bag after your video i recognize everything thanks!!
Thank you brother Glad you liked it!!
As usual top information!! I truly appreciate your videos, I've learned a lot from them!!! The quality and the "oks" are 100% ok by me 🙂🙂
Hahhaa thank you!! I say ok alot just to make sure you guys are following me.. its a little habit i picked up from my health teacher lol ..thank you!! Hope your having a nice week!!
Very good tutorial. Great job, thank you.
Ty
Lost the instructions for keying the new lock cylinder on a 14 fiesta and this video saved my butt thank you very much!
Very helpful, especially since my kit had no instructions. Thank you very much.
Thank you for watching!
Absolutely the best video explaining this I have watched!
Thank you very much!
Thank you !! Im really glad you liked it!
This is a life saver video my friend. Thank you so much. You have how to put in the tumblers on my driver side car.
you was the only one i was able to find to show me how to do this be cause they had no ints.
Thank you im glad you found this video helpful!
Thank you ,as usual very helpful.
You got it!! Thank you for watching!!
Awesome! Thanks for this video, trying to do my own locks on my crown vic. I appreciate you
Thank you! Perfect step by step explanation!!!
Thank you for watching!! 🙏🏼🙏🏼
Good stuff
Thank you bro!! Hope all is well!! And hope your having a great week!!
Super helpful!!!!! Thanks
Thank you!
Awesome video!!!!
Thanks for the visit
Thank you for the really detailed video!
Thank you for watching!
Very Good!...
Thank you Carl
Thank you Bro!
Thank you brother glad you liked it!!
Thanks amigo!
Thank you Chas
Good stuff like always bro!
Thank you ,thank you always, appreciate your comments!! God bless take care!!!
This fits Freelander 1
Similar
Good info, and one handed, bravo! It's too bad almost all the stock Ford door locks have a nearly permanently crimped on outer cover. Was that how your lock was originally, and you had to pry the original chrome cover & little flap door off, and use the easy new clip-on cover from the kit?
Yes that is correct!!
Very informative video like always, but I am going to get you a tri-pod for Christmas bro, but I have to say you are a beast, my shakey ass hands wouldn't have been able to do that 1 handed lol.
Hahahaha thank you brother God bless you,Glad you like my videos!!take care !!!
Great video! Thank You!!!!!!!
Thank u john
I get to do one of these every other week!
nice good job brother!
For answering before! I am back at it again after the fourth attempt from someone to try to steal the old ranger!
I have two questions.
1. My locking mechanism looks a little different than yours. I Have the key pins all in the correct order so that’s nice and flush. But I am confused as to which direction the Tumblr goes inside the outer casing. my design a slightly different from your example.
Any ideas on how I can figure out?
2. When the screwdriver was inserted to break the lock, the rod attached to the key cylinder on the back came loose from inside the door. I tried to put it back in place, but it keeps falling out again. Inside the door is manual windows and manual locks no actuator.
Any idea or Demonstration on how to reattach the rod that goes onto the back of the key cylinder clip where it goes inside the door? Thank you 1000x!
I have a question I have a Ford van and customer has lost all keys if I'm not good a decoding the ignition with the lishi pick could I take the ignition out and pull the pins out to see what numbers they are? I'm still searching for a video of yours that shows you removing a ignition barrel from a car and dismantling. Excellent work as usual if I could fly to the US to get training from you I would 👍🏾
Good video
Thank you
The instructions it came with weren't very clear, you definitely turned a head scratcher into a 5 minute assembly. Thank you!
Put that little jelly in there 🤣
😌😌😌 that jelly does the job!!👏🏼👏🏼 just need the toast!! 😂😂
I have an 06 F150 XL without power locks, my driver side tumbler is bad. Will this work on my truck as well? All the videos I'm seeing as well as all the lock kits I'm seeing are for trucks with power locks.
Yes
Great job with all the step-by-step information which was very helpful! Question for you... Did you have any of the 6 Tumblers/Pins not go down into the slots of the Cylinder?
You kinda have to wiggle them in ..!! They have to be at the perfect angle to go in!! Give them a little wiggle
@@MYKEYSAUTOMOTIVE With your BIG help & assistance and with a little pressure, the pins/tumblers finally seated & went into place. Lock cylinder & sleeve/casing are assembled with shutter & cap on! All good to go...
I have very old keys, my last 3 pins would not align with any of the 1 thru 5 metal slots so I left them out.
Hey bro, your video was a huge help! The kit I got from Autozone was returned by someone else, bastards took the directions, but watching your video I was able to figure it out in about an hour! My only question is what is the gasket for? They took that as well. Thanks again!
Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️
I think I'm working on a little older tumbler had to pry the chrome trim that's on the outside (not easy) ok looks like the tumbler locks on one side and the key picks up the pins or whatever you want to call them. My question why couldn't you just put the new key in and then file the tumblers flush?
Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️
Can I do this even if I don’t have the key for the truck? How do I get started on having a key remade?
I have an '03 Mustang. Had to get a new ignition switch & 2 keys made to get it to start. Unfortunately, the new ignition key does NOT work the current driver door and trunk lid lock.
I want to rekey the driver door and trunk lock to match the ignition key.
This is replacing the entire lock, however can the lock just bed re-keyed by me or by a locksmith?
Thank you,
Yes!!! You can buy ford wafer kit
@@MYKEYSAUTOMOTIVE where would I get that, and would I need TWO kits or just one kit...thx for the reply. What's a good price to have a locksmith do this?
@@MYKEYSAUTOMOTIVE I have been looking, what do I ask for or what is the part number for the wafer kit for the 2003 Mustang? Do I need one or two kits? Much appreciated.
@@MYKEYSAUTOMOTIVE How much would you charge if I set a key and a the door and trunk lock to you? I'm in real need of getting this done.
Never mind, I sold the car...
Can you make a video of a 07 gmc doorlock cyclinder rekey???
Yes
How do I match my old door lock cylinder to the ignition key?
What is the rubber thing for? Where does it go?
Hello, thank you for your video. I have one question do you know where do I get the assembly lube? The grease you’re using for the lock?
I literally guessed every tumbler because I didn’t have the old cylinder lmao
Good work!!
I am trying to use some used pins from ford ranger cylinders from the junk yard. I got measurements from my key and have tried to moving different pins into different slots and I have been able to get only 2 pins to fit and turn. could the used pins from the junk yard are messed up? is it ok to file some down? htanks for the help
I wouldn't recommend using pins from the junk yard!! I would just recommend you buy them new from the dealer or ebay they are noth worth it from the junk yard as they may have been previously damaged..
does it work better with new pins than old used junk yard? tried many combos and I can only get 2 to fit smooth. thank you
Yes should work better with new pins old one have some wear
On a used lock, how does the cylinder pull out without the key?
I only reply to members my apologies!!
Is it okay to use your old tumblers from your old cylinder if they are okay
Yes but i would always recommend use new tumbler pins and new springs!!
Really good video. where do I buy the kit for a 2004 mustang?
Dealership!
Great vídeo, whats the name of the book or manual you are using?
The manual came with the kit ..
How much should i charge To customers?
It all depends brother .. i do a 45$ fee for just driving there .. 100$ for labor plus whatever parts cost..$$
not the best video maker but you do give a tremendous amount of information..where do you find it all
Omar G and are you looking for locksmith information or for someone to videotape your quinciañera party?😂
😅😅
Thank you omar , i try to put as much info as i can!! All by experience, and learning!!
How do you take old one apart?
Open it take face cap off
@@MYKEYSAUTOMOTIVE can’t get pins out. They just pull out?
@@MYKEYSAUTOMOTIVE pulled cap off, but cylinder will not come out and I don’t have the original key. How do you take cylinder out?
@@SoCalCitizen try stick a pick in there and jiggle the teeth or use a different keys of ford
Haz vídeos en. Español tambien
Si tienes preguntas me puedes preguntar ..
El idioma en español
Si disculpa!
where can i get the keymeasurement diagram ?
Comes with the cylinder lock kit
how many dam times you need to ok? how many times you gotta repeat ya self dam dude.
Braaaaaaaap
I don’t know but you say OK about 100 times are you sure that we don’t know what OK is
thank you for watching!!make sure you hit that like button and subscribe!!