How To Build A Manual Machine For Under $30 - DIY
Vložit
- čas přidán 5. 09. 2024
- 1 step to the best manual ever...
RIDE AND SUBSCRIBE
╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗
║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣
╠╗║╚╝║║╠╗║╚╣║║║║║═╣
╚═╩══╩═╩═╩═╩╝╚╩═╩═╝
----------------------------------------------------------------
follow all of these
• Facebook - / clairejencks
• Twitter - / cmjencks
• Instagram - / claire.jencks
--------------------------------------------------------------------
Materials:
(1) ( 2" x 6" x 8") - ( 38 x 140 x 2438 mm )
(1) ( 2" x 4" x 8" ) - ( 38 x 89 x 2438 mm )
(1) Hook - ( 3 1/2" x 5/16") - ( 90 x M8 )
(20) Screws - ( 2 1/2" ) - ( 60mm)
(4) Tire Pieces (from an old tire)
(1) Old tire tube or tie-down strap
Optional Items:
(3) Bolt - ( 3 1/2" x 1/2") - (90mm x M14)
(3) Nut - ( 1/2") - ( M14 )
(1) Bolt - (6" x 3/8" ) - (150mm x M10 )
(1) Wing Nut - ( 3/8" ) - ( M10 )
Wood Cut List:
( 2"x6")
(1) ( 48" ) - ( 122CM)
(1) ( 20" ) - ( 50CM)
(1) ( 18" ) - ( 45CM)
(2) ( 4" ) - ( 10CM)
these 4" pieces ends up being whatever you have left. Just split it in half and call it a day.
( 2" x 4")
(2) ( 24" ) - ( 60CM)
(1) ( 6" ) - ( 15CM)
( 2)(18") - ( 45CM) - 1x 40 Degree Angle & 1x 50 Degree Angle measured from the longest endpoints) -Only cut these once you've checked it against your derailleur with your bike in the trainer.
Kyle and April's Channel:
/ @aprilridemtb
Thanks for watching! Please don't hesitate to like, subscribe and comment below with any questions!
This is seriously the best build video of a manual trainer out there!!!
Thanks so much Matt! Let me know if you build one, I'd love to hear how it goes!
Yes, I was curious to see how the bus build was done.
I was/am not familiar with the term Manual Machine or Manual Trainer. I guess it's to hold your bike while you do maintenance?
I think the video could be improved by demonstrating it's functionality and defining what it is in the beginning.
Great job, Claire! Thanks again for your video. :) Good editing and cute/funny stuff with the talking skull.
Great feedback! Thank you!
Manual trainers are for practicing “manuals” which essentially look like wheelies but without sitting on your seat.
Awesome build!!! Definitely need to make one of these when lumber prices go down ha ha... would be cool to see some of your bus build too!! Thing looks rad 💯
Thanks so much! I’ve been meaning to get some bus footage out of the archives forever, this is good impetus to dig it up. Love your stuff as well, keep it up!
@@ClaireJencks thank you!! Your vids are something to aspire to!! Enjoy every one 💯💯💯
🤘🤗
I feel like I live next to a Hollywood set!
Bahaha, thanks Marcus 🤩 just doing my best work :)
Ok with fall/winter setting in, this is a nice little project. Thanks Claire! I saw Kyle's vid and a few others, but your build looks dialed in! Big question now is-- are you able to manual with this jig???
Hey Robert! Great question - I’ve been on a cross-country trip for the last few months so haven’t been practicing on the manual machine much, but it’s rock-solid and does a great job when I do get to practice!