Metal Prep | Metal Preparation | Welding For Beginners | Intro to welding | AWS SENSE Welding
Vložit
- čas přidán 20. 08. 2024
- In today's video we will cover metal prep or metal preparation. It's important to first get your metal prepared so that you can have a good clean and strong weld.
Metal Prep | Metal Preparation | Welding For Beginners | Intro to welding | AWS SENSE Welding
• Metal Prep | Metal Pre...
#metalprep #metalpreparation #introtowelding #weldingbasics #weldingforbeginners
Other than the background noise, this is a great subject that's not stressed enough on most videos. Prep makes all the difference in the weld appearance and probably the quality of the weld. Thanks for the video.
Thank you
Great video. Very clear and to the point. Great for beginners.
Glad it was helpful!
Firstime to be welders I'm from philipines
Full send bro never lift 😏 🤙 mobbin deep 🙌 knowledge is power ty
Thank for sharing but i think you forget to mention the but joint. thank you
What about new iron from the steel yard?
After sanding it with the angle grinder do zi need to wipe it off with something to get oils off.
I’m weldiing new iron and set welder to settings on side but it just throws splatter . I raised and lowered heat and changed wire speed.
My ground is on fresh ground bare metal.
I can tell when the wite speed is too fast as it wants to push the gun away from the metal.
Too slow it just hisses on the metal and won’t get going.
Thanks
Sorry, just saw the message, guess you’ve probably figured it out by now. I got a new phone and then forgot my password 😏
Sounds like not enough amperage on the wire, turn the welder up. 👍
What grit would you recommend on that floppy sanding disk?
90 grit 👍
Sorry but I can't make out what you're saying with all the background noise.
Ah, the sound is a bit tricky in a shop, too much echo and not great recording equipment either! 😏