How to change front wheel bearing on VW T4 TRANSPORTER [TUTORIAL AUTODOC]
Vložit
- čas přidán 7. 09. 2016
- How to change front wheel bearing / hub bearing / wheel bearing kit on VOLKSWAGEN TRANSPORTER 4 (T4) 2.5 Van 1998-2003 [TUTORIAL AUTODOC]
Wheel bearing on VW Transporter T4 Bus (70B, 70C, 7DB, 7DK, 70J, 70K, 7DC, 7DJ) (Baujahr 09.1990-04.2003) / VW Transporter T4 Pritsche / Fahrgestell (70E, 70L, 70M, 7DE, 7DL, 7D) (Baujahr 10.1992-04.2003) cars should be changed, as a rule, according to one and the same procedure. However, there can be slight differences due to specific features of the vehicle design.
📲 Buying via app is always cheaper than on the website!
❱❱ Install the AUTODOC - interstitials.onelink.me/1036...
⚡ All video and PDF tutorials on replacing VOLKSWAGEN TRANSPORTER (T4) parts: download and watch at AUTODOC CLUB - club.autodoc.co.uk/manuals/vw...
❱❱ Install the AUTODOC CLUB - club.onelink.me/d2X8?pid=yout...
🛒 Visit our website: www.autodoc.co.uk/?...
Wheel bearing: www.autodoc.co.uk/car-parts/w...
Wheel bearing for VOLKSWAGEN TRANSPORTER (T4): www.autodoc.co.uk/car-parts/w...
🔔 Subscribe to the AUTODOC channel so that you don't miss the latest videos on car parts replacements ➜ czcams.com/users/AutodocUk?s...
Was this video helpful? Give it a thumbs-up and share it with your friends!
Have a look at other videos on our channel:
► VW car repair tutorial - • VW car repair tutorial...
► VW TRANSPORTER T4 car repair tutorial - • VW TRANSPORTER T4 car ...
► How to change engine mount / motor mount on VW TRANSPORTER 4 (T4) - • How to change engine m...
► How to change oil filter and engine oil on VW TRANSPORTER 4 (T4) - • How to change oil filt...
Mobile shop: m.autodoc.co.uk/?Y...
📢 AUTODOC on social media:
Instagram: autodoc_auto...
Facebook: / autodoc.de
CZcams: / autodocuk
TikTok: / autodoc.eu
#autodoc #autodoctutorial #autodoctips
Disclaimer:
This video is intended for informational purposes only and does not guarantee achievement of a specific result.
It is recommended that you entrust the installation to highly skilled technicians to ensure the best result.
This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements that are a result of incorrect use or misinterpretation of the provided information. The user is personally liable for incorrect use of repair equipment, tools, or car parts, in particular when this use poses the risk of injury. AUTODOC strongly recommends taking appropriate safety precautions when carrying out any repair or replacement. Keep in mind that low-quality auto parts may not provide the appropriate level of road safety. - Auta a dopravní prostředky
![How to change front shock absorber on VW TRANSPORTER 4 (T4) [TUTORIAL AUTODOC]](http://i.ytimg.com/vi/LD2vD9OEp9U/mqdefault.jpg)
![How to change front shock absorber on VW TRANSPORTER 4 (T4) [TUTORIAL AUTODOC]](/img/tr.png)
Should have measured the thread length on the torsion bar adjuster before undoing, makes it a whole lot easier resetting it when everything goes back on and the ride height is the same both sides.
Thank you for your feedback! After the works including suspension it is always recommended to carry out wheel alignment. Best regards, Autodoc.
O love your videos alot. I can do alot on my T4 now with your videos I have also saved alot of money by doing it myself, thank you so much more grease to your elbow and more wisdom always. Amen
We are glad that this video was useful to you!
Thanks I know how to fix mine now.
Thanks for sharing! 👍
Thank you for the feedback! We are glad that our tutorial was useful for you. Best regards, Autodoc.
Nice video .. help a lot..thanks
Thank you for the feedback! It inspires us to make more videos! We are glad that our tutorial was helpful for you. Stay tuned and follow our latest updates. Best regards, Autodoc.
Great work
Thank you for the feedback! We hope that our tutorial was helpful for you. Stay tuned and follow our latest updates. Best regards, Autodoc.
Great video thanks for your help
Thank you! We are pleased to hear that you like our video.
BIG WORK
Espetacular parabéns pelo serviço 100% profissional. São Paulo, SP. Brasil.👍👍👍👍👍🍺🍺🍺🍺🍺🍺🍺
Muito obrigado pelo feedback positivo, ficamos felizes que tenha gostado.
Melhores cumprimentos
Grupo AUTODOC
At 18:33 that's not a Torx M14, that should be an XZN 14 "Triple Square".
Otherwise very good video.
Could I do this at home , if so what kind of special tools should I buy ? Thanks
Thank you for the feedback! We strongly recommend you to visit a specialized car service center for this procedure. Best Regards, Autodoc.
Title says 'How to change rear wheel bearing', but it is a video that shows changing the front wheel bearing.
Is there a different video for the rear wheel bearing?
Unfortunately, there are no other videos about the bearing for this car.
AUTODOC
Muito obrigado.👍👍👍👍
A trick : you can watch series at flixzone. Me and my gf have been using it for watching lots of of movies during the lockdown.
@Zion Dakota Definitely, have been using flixzone for years myself :D
@Zion Dakota yup, I have been using Flixzone for months myself :D
Tenho aqui no Brasil uma VW Caravelle Diesel 2.4 ano modelo 1998/1999 com 72.000 Km rodados, tudo original de fábrica VW Alemanha, as pastilhas de freios ainda são as originais de fábrica e nunca foram trocadas. Obs:- Estou precisando daquela guiazinha que fica no batente da porta de correr lateral, trata-se de uma pecinha de plástico preto que fica presa no batente para receber o encosto da porta, é uma peça guia que encaixa direto no buraco do batente , é uma peça de plástico ou baquelite pequena que serve somente como guia para a porta de correr se fechar corretamente, se puderem me informar como faço para comprar ficarei mui grato.
No nosso site www.auto-doc.pt encontrará uma ampla variedade de peças de automóveis. O senhor pode contactar o nosso serviço de apoio ao cliente através do email: info@auto-doc.pt onde o ajudarão a identificar as peças compatíveis com o seu automóvel.
Melhores cumprimentos
Grupo AUTODOC
WHATS THE step after he takes off the tires? what is that bolt in the middle of vehicle he takes off...?
In this case, torsion bars are installed in the car in front of the suspension, so starting from 1:04 minutes it was he who released the torsion bar.
Can you make a video on a VW T4 TDI Manual clutch master cyclinder bearing replacement?? I know it's a long video but would totally be worth it since there isnt one om youtube currently. (Name of part might be wrong but should know what I'm talking about).
Thanks for the clarification, we'll think about what we can do with this in new videos.
There is no such replacement, but we can recommend other videos on this car
czcams.com/play/PLWep5LzT0sxmsjGRfdNu8mxqznGNvbhTL.html
great how to.....
Thank you for the feedback! Please specify what do you mean? Best regards, Autodoc.
i mean that your video is simply ,the moves and the tools are clear.the work can be done,from anyone that have see the video and have the tools.......
He didn't torque any bolts, this car will disassemble itself in a day.. :p
work for a 1993? MV
Thanks for your feedback! Please clarify or rephrase your question.
So where is the video of him doing the rear bearing not the front?
Thought the same. Says rear wheel bearing but doing front 😂🤦
What is that thing he losen at the start and tighten at the end??
Thank you for the feedback! Please specify what do you mean? Best regards, Autodoc.
Suspect it's suspension related.
At 16:50
That's the torsion nut. You undo it to release tension at the hub end. If you don't then when you separate the actual hub from its mounting points the upper arm will come down at speed and will hurt anything in its way. Usually though these torsion nuts are seized so undoing them like in this video isn't going to happen.
@@Ruskinrowe12 Its the Torsion bar adjusting bolt sets the ride height of the front of the car. If you do undo it make sure the car is on axle stands as the bolts are often really rusted and if the T section at the top of the thread pops out then the whole van will drop and crush anything underneath.
We all just have a hydraulic press sitting about, of course we do…
Good Tutorial, but the the sound track makes me want to jump out of the window.
Thank you for the feedback! We are glad that our tutorial was helpful for you. The music can be turned off in the area below the video for your comfort.. Best regards, Autodoc.
Only i noted a fact that it is written in title "rear" and dude does a front one? Come on. I know how to do front end anything with closed eyes. But I'm looking for some inspirations for rear since I do not like idea of taking whole wishbone out to pres and I do not have a hand press with sufficient reach so I wanted details on how it's all assembled in rear end. I guess it's again time to open service manuall... 😱 no lazy ways around cause people breaking the Internet with miss naming their content...
You are right. An error has been made.
Thanks for the comment. We will take into account all the nuances in the following videos.
AUTODOC
lol..avec des jante de audi..n'importe quoi..
Click bait ! It’s not a rear one lies
Please clarify or rephrase your question.
AUTODOC
Title states rear wheel bearing and you do front!