World's WORST Muffler Test
Vložit
- čas přidán 19. 03. 2024
- Steve designed and 3D printed some wacky mufflers. We put them to the test!
Download the print files here: www.printables.com/@Steve_SXS...
Check out our printer here: shareasale.com/r.cfm?b=239508...
Buy your SXS parts here: sxsblogparts.com
Buy OEM parts here: www.rockymountainatvmc.com/?r...
IG: SXSBlog
Facebook: SXSBlog
Patreon: Patreon.com/sxsblog
Main channel: / @sxsblog - Auta a dopravní prostředky
Good name: the Performance Enhancing Noise Isolation System
I hate how well that works🤣
Not many people are going to understand this post.
@@Steve-sxsblogparts and who said the military never taught me anything🤣 i can acronym with the best lol
🤣🤣🤣
Yes sir
The trumpet sounding like a straight piped VQ lmfao
Before even watching I just knew it would sound like a VQ😂😂
I heard it and went straight to the comments lmao
Lol.
Without the silly trumpet sound, during the revs yeah. Sounds halfway good~
Deadass 😭😭😭😕
The trumpet one was 😂... every civic driver at 2am
Nah, that 350z driver at 2am 😂
They should do a kazoo that would totally sound like a straight pipe d series
Them are fighting words.
⁶
Dudes found out how to make a 125 sound like a street bike.
"I want to try my ideas without it being tainted by reality." - Steve
😂
shirt material
Fur sure
Hit so hard
I reject your reality and substitute my own!
Maflute
Speaking as a trumpet player, that part of the vid was both heresy and hilarity combined. Take that, woodwinds!
Are you Dr. Frasier or are you Dr. Niles ??? lol
As a trumpet player myself, im kinda interested in seeing a woodwind muffler now. Mouthpiece and reed installed of course.
Might be able to get different notes easier than with a trumpet and its valves.
@@100GTAGUY Adding a proportionately-sized reed to the exhaust side of the engine would absolutely "work". Many small engines actually use reeds to regulate air intake and compression. It's a rapid series of reed open/close vibrations, where a rush of air travels into the cylinder through the reed, which then snaps shut as the piston compresses the air, preventing the air from escaping.
@@mrmadunit3923 Damn, now that you've asked.... I'm uncertain!
Trouble is, woodwinds restrict airflow even more than that trumpet. You’d also have to make a way to progressively/actively press the reed (as lips do) to pitch it, but even just a couple of rubber bands slid in/out on the mouthpiece might make that work.
The camera pan from the fuel dripping to the blowtorch did it for me😂
Timestamp??
When they pan from the fuel to the torch! That time! @@jayrazz8499
11:28
Yes...awesome!
The fact that the trumpet kinda sounds a like a straight piped VQ is hysterical
The blue muffler must be known as "the Trojan"
Nah the 18+ blue crayon 🤣
The quartet Muffler
French tickler
"Blue Dragon"
"For her pleasure" or "Papa Smurf"
Test 3D printed designs that people send you like the fan showdown on major hardware!
That would be dope, I love the fan showdowns
I agree that would be really cool
YES!! ALL THE YES!
It's literally just gonna be cocks
%100 support this idea
Remember the decibel scale is logarithmic not linear. Every 3db on the scale represents a doubling of the power. So even a small difference in the measured number can represent a large difference in actual volume.
You aren't wrong, but it is a bit misleading. 3db IS doubling of power. However, the intensity, which is the sound power per a specific amount of area, is linear. So 20db is 10 times more intense than 10db. But stopping there would also be misleading, as perceived LOUDNESS, is a doubling per every tenfold increase in intensity or, db. So 20 db is TWICE as "loud" as 10db. So +/-10db is ×/÷2 loudness.
we dont perceive it like that.
Your statement is true, but we ear it differently. For each 10db step, we increase (or decrease) the perceive volume by two (or half).
Doesn't really matter; the phone wasn't at the same distance of the exhaust in the separate tests.
I haven't laughed that hard in a while! We need a tuba on the back of a sxs out on the trail 😂
Ok.... EVERY bike out there needs a trumpet muffler .... Trumffler?🤔
Mumpet maybe?
The Trumpfler will go over well in Portland Oregon, they just banned leaf blowers! 😆
the nissan 350z-inator
@@slowdriver6868 The VQ-inator
A loudner bro 😂
Steve's a mad scientist and I'm here for it!
Yes I concur
If he's the mad scientist, who's Dom? Who's Brian? Which ones Lettie???
Same man
I'm here for it 😂
Mmhmm
You're here? Waw
Steve's big muffler would have measured quieter than the stock muffler but you have the opening pointed right at the decibel meter versus the stock muffler's exit was pointed more up and away from the meter.
Noticed that. A tail cone would help and would probably be sufficient to get that twin sound…
27:17 a bagpipe would work well😂😂😂
Yes!
I wish that was true! You’d have to take all the reeds out of a bagpipe to do this with it, so it wouldn’t make any bagpipe noises. Also, the mouthpiece of a bagpipe flows a lot less than a trumpet, but that could at least be bypassed.
Blue Dilduffler
Put a 2stroke exhaust chamber on the engine
What would that do?
Make it sound like a bike should sound 😂@CZcamsProtectsKidFuckers
LMAO! Bring on the entire horn section instruments from the Philharmonic Orchestra! We will be laughing for months!
I'm absolutely loosing my shit over the trumpet 😂😂😂
You guys all act like you’ve never seen a trumpet in a tail pipe before 😂😂😂 good stuff guy!😊
I've watched American pie! Band camp
This one time at small engine camp
@joshuaolander201 so we gunna bone now?
Ok we need this shirt! "I just wanna try my idea's, without being tainted by reality" that sir is a life motto!
Your average Infiniti G35
The whole "I want to try my ideas without it being tainted by reality" is how amazing, crazy and unique ideas are made. Keep it up yall this is awesome.
I came for the trumpet and was not disappointed 😂😂 thank you CZcams algorithm gods 😂
The 3rd one actually made the motor run better
Better scavenging maybe?
The slow pan from dripping fuel line to burning map torch 😂
The "on that note" part and slowly hearing everyone get it one at a time was hilarious
Before I say this, I’m a Matt fan, great dude. Glad we are hearing and seeing more of him!! But when he said “dUde it sounded like a trumpet” he sounded like a trumpet 😂😂
The trumpet was playin flight of the bumblebee when Justin was all over the throttle lol
lol the 17:23 exhaust should be call the lol 😂 “bad exhaust” 😂😂😂 to emulate the woman’s bad dragon 😂😂😂
I'd say a good old bagpipe would be great. 😂
Your quiet muffler exit pointed toward phone. Was quieter then the stock pipe for sure
The "Ribbed for Her Pleasure" Viagra blue muffler sounded the best IMO. Good stuff!!!
I was sipping on my drink when he started it up with that trumpet and I almost choked because I burst out laughing as the trumpet went HONK-HONK-HONK-HONK! 🤣🤣🤣🤣🤣🤣🤣🤣
We have to see a modified Tesla Valve muffler!!!
I'm here for this
Insane back pressure 😂
@@dominicrichardson5546 would be the opposite, if the valve is placed in the right direction. Most tesla valves online are just small scale examples...
I like to see this on a 2 stroke also
We need to see every brass instrument now! Have not laughed so hard in so long
The Muff Divider?
Tuba, trombone and a scaled up 3d printed kazoo! Was hoping for greatness from the trumpet but was not expecting that! Too good
Maybe try a modified version of the Tesla pump,run backwards it cancels wave fronts
The way Steve says “ummm hmmm” just makes me laugh. “And on that note”
I've always said that Steve is the hidden Genius that makes this SXS thing work
We definitely have to see a 2024 xp trumpet exhaust
Cant believe no “HORN OF FREEDOM!” 😂
Steve you are definitely the mad scientist. You love to experiment with the printer
Hahaha the trumpet was fricken hilarious
I have had that twin single cylinder sound for the last 4 years. Im really looking forward to the test.
Trumpet was the best by far!!! Totally put one on a sxs!!!
The Blue one should obviously be named "Horn Of Freedom " LOL
The trumpet muffler sounds like a pissed off nitro RC
Watched for the 3d print part. Liked and subscribed because of Steve the mad scientist! Tuba or bust next!
You should call that the inappropriate spiral
plug that tail
uwu
OWO . Also I love how the replies are toasters
Tip for your laptop i have the same one you can upgrade the internal components for cheap and make it run stronger, start with the ram its the most limiting component on the laptop, it comes with 8 gigs of ram to start depending on your model, but you can get up to 64+ gigs of ram. Love your content keep up the good work
I looked into that when I first bought it but never got around to doing it, I really should. Thanks!
The Blue Swirler muffler😯 Steve has some serious ideas . Wow, you guys have some fun times. 👍 Hey bud, what kinda fu*&ing muffler you got there? 😂 The trumpet had me dying.
The blue one should be called "the Bishop "
Of the one-eyed variety?
Y’all will all ways the good vibes crew
DR. Muffle... The only one with no eye protection!!!
Dedicated!!!! AWESOME!!!!
Steve is the maddest of scientists.
I'd take 3d printed piston with 110 garage logo to go next to my autographed license plate
I just want to know if putting a part in a Foodsaver vacuum bag is the same as those big curing ovens at Mansory
So, you were correct (sort of) in that if you double the sound pressure it's represented as +3dB pressure level. However this is not a doubling of loudness due to the logarithmic properties of the ear's response to sound. For most people with normal hearing, +3dB is just about audibly louder, with around +10dB being a perceived doubling of loudness.
I like the function of the Blue one, it has the best of both worlds. Low RPM is pretty quiet but in hi RPM sounds crazy 🤣
When we lost power for 3 weeks due to a hurricane a few yrs ago, people would steal your lawnmower and zip tie the handle so it would run by itself, before stealing your generator and letting the mower run to mask its disappearance.
This was done overnight and most people had relatively small generators but you wouldn't wake up due to any audible difference.
If any of these work, you could market them as generator theft reduction devices. A very specific and uncapitalized market, Specifically for long term power outrages after hurricanes.
Blue Korkscrew 😂
Don't be so hard on yourselves, the test was great 😁
the trumpet is genuenly one of the funniest things I have ever seen, I played trumped for years and it baffles me that this actually works xD
Love the experiment type videos, keep em coming!
I think there's a Patreon supporter that should be named after. Barry McCockiner. This person has supported for a long time and I always get a little chuckle at the end of the videos when I see their name.
A true legend
Bros, I am so here for old school goofy ass videos! I'm all in! Do a head next!
Just found you with this video, and I’m not going to lie… I love it! I love watching people make shit just simply because they had an idea. I also really like watching people work on engines and the like, so this is going to be great!
Looks like you guys are into the adult novelty business now!
Honest, real, no bs. Can't wait for the next video. Remember I support.
Adapt *TWO* trombones so you can replicate the, umm, spiral exhaust idea. You could actively tune them to either do the twin sound *or* cancel itself out!
Matt behind the camera with Steve’s creations and Justin runnin the levers and buttons makes for an interesting and awesome video. Keep em comin boys
3D printed wheel spacers come on
All jokes aside, the trumpet at high revs sounds like a vq35/37 from an infinity as the joke goes. However, I think you are on to something with the blue muffler because unequal length headers are a thing, mostly a subaru thing, but they can change the way the flat 4 sounds. So, keep experimenting with the unequal length mufflers.
Steve killed it on this one. Engineer doing engineer things.😂. I am printing a twister and trying it on my wolverine! Kewp up the great times
Haha I was wondering who was crazy enough to actually download that thing, good luck!
Justin cracks me up.
The blue Unicorn!!
I know Steve is a full sender but I had no clue he is a wizard on top of it!
The trumpet had me dyin. 😂😂
If this ends up being like the fan show down with viewer submitted designs, should be 2 or 3 viewer submitted item plus one random already existing item/object as well for science and laughs to spice things up 🎉 😮 😊
Over the top ,way to go definitely do some more.
"I just want to try my ideas without it getting tainted by reality"
felt
Steve is a genius!
It’s the unicorn horn!!!🎉
Noleogarage kicks ass, you guys are killing it
The spiral one does sound like a small v twin....hell yea👍👍👍👍👍
This was awesome!!😂 Now I want to see somebody use a tuba as a muffler! Gave you a video idea, make it happen! 😂
Loving this channel
Now you should see how loud you can make it.. maybe a tuba 😂
4:40....now that's a shirt!! Arrow pointing up with "Tainted by Reality" caption around my beer gut.
24:35
That one civic at three am
I clicked as soon as i saw the thumbnail of a horn on a motor!! Like what the hell! hahahah
Kinda crazy what it sounds like 😂
Dude those are actually brilliant ideas. That 1st one is incredible. That's how things get made man. Ideas that turn into tweaks and fixes that turn into a fully functional result.
Purposely not researching stuff so that it doesn’t corrupt your ideas is something I love doing as well, as it has led me to better methods than the commonly used ones in my life constantly
Sounds like the bike from excite bike lol
Your actually 100% right.
Rubber hose does an amazing job of soaking up exhaust noise as well as a over sized glass pack
If this video taught me anything, then it is that referring to 350Zs as trumpets is absolutely the correct thing to do.
Steve I need a quiet cylindrical one threaded on one end, and maybe about .308 or also 5.56 on the other end please 🙏 😂