HOW TO MAKE YOUR DODGE 392 EXTREMELY LOUD BUT NOT RICER FOR $300 (SPELAB ACTIVE EXHAUST CUTOUT)
Vložit
- čas přidán 2. 09. 2021
- If you're new to the channel consider subscribing. if you are interested in this product link to spelab racing will be below.
www.spelabautoparts.com/colle... - Auta a dopravní prostředky
Lads wasn’t able to upload videos for nearly a week not my choice but anyway if you enjoy the video any support is appreciated 🍀
Can you add the what dual exhaust it was
@@manueltheking5614 it’s the factory exhaust
It says the motor isn’t waterproof so when it gets wet while installed is that fine?
This is definitely going to my list.
I'm get sum install tomorrow with headers n high flow cats going with dmh
Great video. That’s the way they are supposed to be installed.
I’m doing this on my 392 swapped 79 Chrysler cordoba
Nothing like a straight piped 392 hemi!!
but when you hear the sound does it sound like it is from the middle of the car ?
Back in olden days (1970's) we had the same thing, but operated by a cable. To be frank, I'd be more comfortable with a cable, not going to fail. Big negative on your setup is ground clearance
Cables fail all the time
That's a nice tree92
🤣🤣🤣
Have you had any reliability issues with this??? I know the temps range from 800-1200 F coming out of that Cat. That motor can't be too happy with those heatsoaks.
Damn the chipped front splitter. I know this pain
With the valves open does it require a tune or is it all plug and play?
I would have placed those in front of the mufflers or resonators much louder that way
It is on front of it. Those are the cats you saw
very nice!
Thank you so much bro!!
That lift was something out of the Flintstones
Does the pipes scrap to the ground
If says the motor isn’t waterproof so when it gets wet while installed is that fine?
Hey
I have sv6 Holden commodore I wanna make one of those could you make it for
have you had any issues with it?
Was this cutout reliable ?
Ohhhhh... Irish I had a Schlitz!!
Didn't that affect the clearance??
Wait so 3inch from spelab works, arent the stocks 2.75?
Yea but headers are 3” and it attached to headers
How does that sound different from the stock exhaust valves? I want to switch my 392 back to simple straight pipe, but it will still have the valves.
The cutouts I'm sure sound heavier, cuz they're near the front yeah?
Cool video!
The stock ones are a restriction in the exhaustion in the exhaust system that open into the systems these open outside bypassing the mufflers and resonators, although in this case the mufflers I think were deleted.
Every Show boating brother will have one of these damn things. Now they ride Harley and sit at lights reving their crap over and over.
Ddaaaaammmnnnnn 🔥🔥🔥🔥
391 cubic inches.
Does the size of them matter?
You need to find out the size of the exhaust pipe for this charger it was 3inches
Bet bet appreciate it
yesirrr
It’s been a year so I’m sure he took dat garbage off by now
You have no idea what the hell your talking bout with that exhaust
I didn’t claim to know that’s why we brought it to a muffler shop
They he say 🎄 92 😆😆😆😆
Hot exhaust right under the fuel lines. No thanks
Firstt
7:44 - 8:29 😂 nah does not sound good sounds like someone chop the cats off next time just put the cut outs behind the rear mufflers put in the cut outs next to the catalytic converter‘s this causes you to lose horsepower the exhaust is not catching back pressure 🙁
Cutting the cats off does not cause you to lose horsepower🤨
BaCkPrEsSuRe 🥴🤯🙃
Instead of doing the back mufflers, u should have cut out the mids.