Worlds Fastest RTR boat TFL 41" Zonda 1st run of 2022 testing New "Super Zonda" props by dasboata 💯🚀
Vložit
- čas přidán 17. 08. 2022
- TFL 41" Zonda on stock electronics 3674/ 120 amp esc's running on 6s from Banggood.com Props testes were from "Super Zonda" props from dasboata. Thanks for watching! More to come!
Buy this boat here
www.banggood.com/custlink/KGv...
Buy the Black version here
www.banggood.com/custlink/KmG...
Buy the servo I used here.
www.banggood.com/custlink/G3m...
www.banggood.com/marketing-rc...
#tflhobby
#tflzonda
#WorldsFastestRTRboat
#Banggood.com
#fastrcboat
#FastestZondaEver
#110mphclub
#100mphclub
#120mphclub - Zábava
Watch this boat hit 124mph here! czcams.com/video/wCGfGCw4P0Q/video.html
Buy this boat here
www.banggood.com/custlink/KGv3Uw385I
Buy the Black version here
www.banggood.com/custlink/KmGKkuIFAd
Buy the servo I used here.
www.banggood.com/custlink/G3mDzTHBdQ
Hell yeah glad to see you got it back out! It sounded awsome🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥
Thanks!
One Luv! 🔥
Appreciate than Bro! 👊
@@MrMad2424 I cya still out getting them good #'s...
@@mtctookie25 Just tryn' to keep up Bro.💯💯 Hope you doing well.
That's what you call laying it down, wow she was moving 👍 rice run and no flip or smoke way to go !!!!
Lol. Thanks appreciate that!
Awsome run! She was gettin it!
Thanks Bro!
Gotta love it!!!!! Boatlife.....get some!!!!!
That's rite Big Bro! Just wait we fixing to make the haters sweat. 😅💪💯👊
@@MrMad2424 that's the best thing to make em do too......
Fantastic
Thanks!
Wow! That moves out , And it’s stock , Thanks for doing the video 💯👍
Thanks ! Yes ass sock with only a prop swap. 123.6mph is my best.
@@MrMad2424 Awesome that’s fast! What’s the clear tape brand your using? If you don’t mined me asking. Thanks
@@paintendaveextremecollisio8057 Its Hatch tape from OSE www.offshoreelectrics.com/proddetail.php?prod=fab-tape-15
Awesome! Love that Boat!
Thanks! Appreciate that!
Great run! She’s a rocket 🚀
Thanks Bro!
Nice run!!
Thanks Bro!
Mark, I hope you are well. When will you be doing more speed run videos?
Great running, Mark! It looks like another set of props to ask Chris about.
Thanks Bro!
awesome test run
Thanks Bro!
@@MrMad2424 😁👍
Hello Mark, any new runs with your Zonda or MG36 coming? It’s always good to see your boats in action.
You’ve got a great spot to run👍
Thanks! If it was a little longer it would be perfect.
Would like to see the Proboat UL 19 Hydroplane again! Thanks for sharing!
I still got it. Cooler weather is just around the corner. It'll be back out at some point.
Do you have a video on how you made the recovery boat attachment?
I show it in this video czcams.com/video/4O0ZAIUk9os/video.html
Looks like your running the Futaba 2.4 GHz Magnum 3 PM radio, I’ve had mine for years and it’s still one of the best radios especially for range. Nice run 👍🏽
Thanks! Yes that's the radio it has great range.
Dear Mark, how do you drain water from your Zonda? Mine has no hole. Will a BJ42 plug work?
if its a lot of water then pour as much out as you can and then take a hand towel and dry the rest out. If you wanted to drill a hole for the black jack 42 drain plug then it should work as well.
With my skill set, more flotation and a drain plug are mandatory.😬
Dear Mark, do you recommend rerouting the left side motor cooling lines on the Zonda? It would seem to me that the line should enter at the lower end of the motor and exit at the high end to fill the cooling jacket. Or am I overthinking this? Thanks for your time.
You're over thinking it. I haven't done it because the exit would come off the can funky from where the outlet exits the boat at.
Yup, it would be a cluttered routing. Thanks.
Dear Mark, do you use the one piece or two piece flex drives on your Zonda?
One piece shafts from dasboata.
It's fantastic
I have a zonda twin, too
I would like to know the specifications of your Johnda ESC and motor.
Do you use Hobbywing 120A and sss3674kv2075 motor?
Also, do you use a size 6s 5000 battery?
If I hear your answer, it will help me a lot
All stock motors and escs. I show them at the end of the video. Seaking 120 and sss3674 2075kv
@@MrMad2424 Thank you for your reply.
I'm going to drive in a natural state
@@user-pr1nf5zf2t No problem.
Dear Mark, can you recommend a good strut angle 📐for the Zonda? Like with a gap between a straight edge from the boat bottom to the rear edge of the strut housing? Thanks for your advice.
I've never measured mine that way. I do know they are down a degree or two from neutral.
Thanks Mark. I haven’t found a reliable method to measure degrees.
@@christophercurry7410 www.lowes.com/pd/Johnson-Level-Magnetic-Digital-Angle-Locator/1000085673?cm_mmc=shp-_-c-_-prd-_-tol-_-ggl-_-LIA_TOL_216_Construction-Hand-Tools-_-1000085673-_-local-_-0-_-0&ds_rl=1286981&gclid=CjwKCAiAmuKbBhA2EiwAxQnt72OAyhgsPuHpWh7Cc6rMCo44-LywaDMIjI5p15MQSKNjczmECF_FCxoCUz0QAvD_BwE&gclsrc=aw.ds
Dear Mark, I have been running my carbon Zonda with Octura based props from Chris with great results for general running. I can run a neutral strut and get to 85 mph on my 700 ft pond. What do you think about trying the larger 4092 2140KV motors in the boat? Accelerating quickly in that 700 ft seems to be the key.
@@christophercurry7410 Slightly more acceleration with the larger motor but the top speed wont be much different. KV is KV,
did you use a harder pitch prop than the standard 1.4 maybe a 1.7 42mm porop?? just guessing..
These are full blown custom abc props. Little larger diameter than 42mm
@@MrMad2424 ive had alot luck with the abc and octura 442s. and a little higher as you stated i balance and sharpen them myself it takes forever but there just to expensive for me pre sharpened, ive also had alot luck with zippkit props there cnc ready to go for decent prices.... good luck looks like your having fun with it...
@@matthewwilken2051 Thanks! Yes a lot of time and work in sharpening and balancing props.
@@MrMad2424 yes it is a lot of work. just ran my zonda on the props from chris. couldnt be happier with performance.
what motor is Stock ? and Are you running it on 6S ?
3674 2075kv are the stock motors on this version. Yes running 6s.
Garmin gps no good?
Yes its normally spot on. it had a fart read like 84 i believe on that pass. It's a great gps. I think the battery wires were over the top of it creating interference.
What BRAND Motors ?
factory motors. SSS 3674 2075KV