How To Remove and Install Dirt Bike and ATV Grips
Vložit
- čas přidán 24. 04. 2014
- Shop Our Grip Headquarters!
www.rockymountainatvmc.com/Sa...
Changing the grips on your motorcycle or ATV is a simple task and it's something every rider should know how to do. Having new grips on your bike can totally change the feel of the bike and can help you feel more comfortable therefore improving your confidence and speed. This video walks you through how to properly and easily remove your current grips and then also how to properly install your new grips. We also explain some of the differences of motorcycle and atv grips and how to quickly tell the difference between them. We also demonstrate how to safety wire your new grips to the bars for a little more security using the Tusk Safety Wire and Safety Wire Pliers. Change the look of your bike today starting with a new set of grips from Rocky Mountain ATV/MC! We carry a huge variety of motorcycle and atv grips in tons of different styles, colors, and compounds to suit your specific needs. Visit our website www.rockymountainatvmc.com to see what we have in stock for your machine!
Click Here To Subscribe To Our Channel!
/ @rmatvmc - Auta a dopravní prostředky
This helped a lot because I am a new rider and I wasn’t sure if the throttle was part of the grip and now I am relieved that it will be easier to change the grips than I thought
We're glad this video helped you out!
Thanks for watching!
Only use a single line of glue or that bastard isnt coming off. You can see 1/2 of the glue squeezing out in the video.
Buddy got glue all over 😂
Just watched a guy remove his grips with compressed air. That's the way to go! 👍
Giving the grips a few cuts also helps them come off but obviously if you want to keep the grips you won't want to do that
Thanks for the vid dude ❤
I'd love to see a video on the ProTaper Micro bar grips! There has to be a trick... They are so thin that I blow them out constantly and have tried so many different techniques. Especially the Throttle side!
He helped me put on my new grips
Thanks for the help, But I don't think contact cleaner is needed, I just wasn't sure what to do with the throttle side of my bike.
Perfect.
Think you.
Thank you this really helped
Hair spary on bars and glue in the grip never coming off
Pro taper pillow top grips, you don't even need glue. They sit tight and don't move
Can I do tht wire trick with a zip tie? I have a mini bike.
I never use glue. Clear spray paint/clearcoat works way better and doesn't leave a big mess. Spray it into the grip, push it on, after it dries it's rock solid.
Not to criticize you but, contact cleaner? why not use wd-40?
Because if you plan on re-using the grips you are removing, it's harder to remove the WD40 from the inside of the old grips and they won't stick to the grip glue. If you aren't using them again, just use a razor blade.
tootallbob sure it is. You ever hear of brake clean?
Oil based solutions breaks the grips down
Because you'll oil the bars leaving a bond breaker between the glue and bar
Am we take the wires off after a day
Everyone of them forget to tell you, make sure it’s not a grip that is permanently on to the throttle, some people buy the aftermarket ones that are like that and it’s not coming off you just got to get a new throttle.
Rock mountain high🍀💪
I really need to replace my throttle tube lol. 3 fingers worth of grip isn’t enough
but its such a pain getting grips off after using grip glue, I always never had a problem with grips slipping but I would only use the wire.
When i swap the clutch side grip it never stays it still keeps twisting
Do you have any advice for me
@@tiukusti8990 put it on with hair spray, it will make it easy to slide on but will glue it when it dries
If you dont plan on re using them just take a knife heat till its glowing with a torch and slice through them like butter. Just dont cut throught the throttle tube.
Or just use a sharp knife?
Do you have to have the safety warriors on
No they are not needed, it's more of just rider preference.
I have never used the wire. How important is it?
You can’t safely clear triples without em.
lol i hate using wire. glue is enough for me
Do u have to use safety wire the ones I have on don’t have safety wire
I'm guessing you still have your stock grips? Stock grips will usually come glued on but no safety wire. When replacing them, I would recommend using safety wire. Grip glue works well, but it isn't uncommon for grips to still move without safety wire. Or just go to a lock on grip and you don't have to worry about any of that.
Hey man I CANNOT get my throttle grip off idk if I have any contact cleaner is there any other way?
Is it glued on? If it isn't, you can used compressed air to get it off but if it is, you will most likely just have to cut it off and try to scrape off as much of the rubber and glue that is left on.
@@rmatvmc tysm man
Good god man. That’s a shit load of glue… and 3 ties?!? What kinda riding r u doing?!?
Is it fine to use grip glue without the wire?
You can definitely use grip glue instead of safety wire.
i only use glue. u can also use both if u want
Can I use Carb Cleaner?
I used carb cleaner and it worked just fine
WD-40 also works fine.
Yo my friend kinda broke his throttle thing while removing girps because they were melted into it
Yeah that's what happened to me. I'm going to assume your friend used a box cutter, that's what I used on my old bike. I did the same thing, just destroyed the throttle tube. Use the method in this video, it doesn't destroy your grips and you don't have to worry about cutting past the grip and into the throttle tube. The term is called vulcanized, its usually Kawasaki and Suzuki bike which have them.
What if I have twist and thumb throttle
what kind of bike you got wtf😂
What the hell you riding boy
You can avoid all that and just buy ODI lock-on grips much better
Yes but if you have a race throttle kit you can’t use lock-ons
do i have to use the special bar glue can i just use gorila glue or somthing
Super glue will probably make them very difficult to remove but it's not a bad option. There are many options of grip glue that can all work just fine. I"ve heard of people using everything from contact cement to hair spray with good results.
Why no use compressed air? Instead of scratching the bars.... I know it won't be seen but still.
A lot of people don't have an air compressor but compressed air also works great!
Don’t think you used enough glue
Cut the old off woth a razor knife. Idk why tf you'd pry the old ones off woth a screwdriver.
You dont need grip glue. You dont need anything fancy. Just get a little butter cookimg spray and just make a quick pass down the bar. Super light coating. Not all sides. Just ine quick stripe down each bar end and you're done.
Slide the grip on, you're done. Ready to ride the next day. Zero grip spin.
4:20 imma call her
I BOUGHT THE WRONG GRIPS
@@drev1 lool
WIRES? XD!
Wire is criminal 😊
Gotta watch out for the pointy ends of the wire wrap 😉
US: Nice looking
RM ATV: "Pulls out the wire and destroys them"...
3 wires and a shit load of glue... 😬
What glue I needa get
standard spray paint instead of glue - thank me later
@Magnus Fjerstad yep - its real slippery then it drys and sets tight. its a elegant solution - but wear gloves ;)
@Magnus Fjerstad you don’t sound too convinced … let me know how you get on. Super easy.
@Magnus Fjerstad here - czcams.com/video/6ECVt2Z98sM/video.html
@@g000se99 i remeber some friends of mine using hairspray back in the day. Had the same effect with going on easy and then drying
@@g000se99 haha just wached the video you posted and saw he mentioned hairspray!
You don’t have to do the wires guys. It’s not worth it
thank you so much for informing me im looking for grips for my kawisaki bayou 220 and i make my own money at a young age and i wasent looking forward to buying that stuff but should i still use grip glue?
@@demmcylol8166 Glue the grips always or use the hairspray/spraypaint trick. I've never used wires as I hate them
@@demmcylol8166 yeah grip glue is relatively cheap you can get a small container that’s enough for like 6 grips total at a cycle gear store if there’s one near you for about $3. But also if you don’t wanna spend money on that, you can actually just use hairspray.