Horizontal Stabilizer Part 2 - Zenith 750 Cruzer Kit Plane Build
VloĆŸit
- Äas pĆidĂĄn 29. 08. 2024
- In this PART 2 video you'll see how my dad (Jeff) and I (Adam) went about build the horizontal stabilizer for the Zenith 750 Cruzer Experimental kit plane we're building. The horizontal stabilizer is the part of the airplane tail that sticks out horizontally (hence the name) and is used to stabilize the aircraft in flight and provide a solid structure on which to attach the elevator (the moving control surface that makes the plane go up and down).
đ đ§°đ Tools We Use to Build Our Airplane (that you can get from Amazon)đ đ§°đ
+ Rivet Gun amzn.to/2oZIpP5
(Be sure to use the custom heads from Zenith for the Zenith rivets!)
+ Gyroscopic Lithium Screwdriver amzn.to/2MnTqBI
+ Swivel Deburring Tool amzn.to/328LRWl
+ Edge Deburring Tool amzn.to/2Iyqy8I
+ 1/4â Drive Torque Wrench amzn.to/2VqcC5L
+ 3/8â Drive Torque Wrench amzn.to/2orWvIR
+ Orange Rubber Tool Tray amzn.to/2VrrlNL
+ Magnetic Parts Holder amzn.to/324M2Sw
+ Dental Picks amzn.to/30WJLax
+ Tap & Die Set amzn.to/2AQRcFE
+ Deburring Wheel for Drill amzn.to/2VqELtJ
+ Fluting Pliers amzn.to/2OvhGV6
+ 1/8â (copper) Clecos amzn.to/2LXrcyz
+ 5/32â (black) Clecos amzn.to/30ZnGYW
+ 3/16â (gold) Clecos amzn.to/2Oyd1lk
+ Right-Angle Drill Attachment amzn.to/30Wp1zy
+ 300mm Metric/Standard Ruler amzn.to/35ec2wt
+ Vise-Grip Pliers amzn.to/2OtQciz
+ Round File amzn.to/32aMvlO
+ Flat File amzn.to/2VvdDJV
(By the way, I'm supposed to let you know that these are affiliate links. So if you make a purchase using these links, I will make a small commission (but at no extra cost to you đ))
DISCLAIMER
This video is intended for informational purposes only, and may include information that is inaccurate or not applicable to any other situation. Use any information at your own risk. The individual views and opinions expressed here are solely those of the individual. Always follow manufacturer recommendations and FAA regulations and best practices.
cool im back to watch more of your assembly.
mike
awsome videos,,, it is instructional
Nice job
Nice
Looks good. I am also building a Cruzer, did you perform the updates to the stab per the service bulletins?
Thanks! Yes, we are in the process of doing that now. Reskinning it with the thicker skin and adding rivets in the ribs, and extra hinges.
Please explain the corrosion treatment, did you do it on the other side of the horizontal stab ?? Or just the side that was open ?? Any treatment on the fuselage ??
Hi! On the H stab we applied corrosionX to all the mating surfaces. Mostly no treatment on the fuselage. But we plan to use corossionX spray system after it's fully assembled.
Please put the camera down, its soooo jerky. we dont need to follow your head as you talk. You can stand in the shot and it doesn't make us suffer motion sickness. Otherwise, great channel, Sub'd!
Thanks. Which part was it that bothered you?
@@jeffandadambuildazenith6816 Its just that when you hold the camera, its a bit jerky and all over the place. After a while you start to feel a little motion sick. I understand you need to show us close up shots sometimes but maybe get a stabilized camera mount or something to smooth it out? This would probably solve it.
One thing the Music is too loud
I like loud music though.
It looks like you missed the October 3 design update for the horizontal stabilizer. Ouch.
Thanks for the heads up. What was updated?
@@jeffandadambuildazenith6816 At least two flying Cruzers developed cracks in the leading edge skins. The Zenith fix has three parts. (1) replace the horizontal stabilizer skin with .025", or add a .016" doubler on the leading edge. (2) increase the number of skin-rib rivets, one in between each existing rivet. (3) extend the elevator hinge to the full width of the stab.
Honestly, I don't know where the link to the PDF is on Zenith's web site. I'm sure they'd send it to you if you ask. I also recommend joining the online community at www.zenith.aero. I'll see if I can't email you the PDF.
@@jeffandadambuildazenith6816 www.zenithair.net/wp-content/uploads/2018/07/SERVICE_LETTER_CRUZER_750_elevator_Piano_Hinge_OCTOBER_2018.pdf
dude your making a action video or a building video i can't tell
You and me both!
Eat less carbs. Help the brain fog. Seriously....
Keep up the videos. Don't mean to be an ass.
wonder what the wife thinks?
Just updating insurance policies.