Turning A Carpenters Pencil - The Blank Was To Short
Vložit
- čas přidán 8. 09. 2024
- Instagram: @RJBWoodturner
E-Mail: RJBWoodturner@yahoo.com
Patreon: Patreon.com/RJBWoodturner
My Etsy Store: www.etsy.com/s...
Redbubble: www.redbubble.c...
Be sure to check out my second channel: WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time.
/ whatchadoinbob
Preparing Acrylic Blanks for Turning: • Preparing Acrylic Blan...
Preparing Wood Blanks for Turning: • Preparing Wood Blanks ...
Below are links to the tools I used in this video, or similar tools that will perform the same job. “As an Amazon Associate, I earn from qualifying purchases.”
Blank Prep:
Rikon 10” Bandsaw - amzn.to/3eOULP8 (Craftsman not available)
Blank Cutting Jig - www.turnerswar... (Search for Blank Cutting Jig.)
Blank Centering Jig - amzn.to/2S4fC7r
Machinist Square - amzn.to/3gM6BQb
Deburring Tool - amzn.to/3UlMJ45
Drill Press - amzn.to/3cUrwJl
Drill Vise - amzn.to/34Yv4aC
Pen Tube Insertion Tool - amzn.to/3bLeGfW
Play Doh - amzn.to/2xTUw4V
Epoxy - amzn.to/2VOaTYI
Craft Sticks - amzn.to/2KrrHQ5
Barrel Trimmer - amzn.to/36nUQpb
9” Delta Disk Sander - amzn.to/2yINGiA (Craftsman was not available)
9” x 150 grit replacement sandpaper disks - amzn.to/2Y1U0fO
Abrasive Disk Cleaner - amzn.to/3D3HtLX
Rafter Square - amzn.to/2Xo4bcy
2” C-Clamp - amzn.to/3aBstoj
Sanding Jig - www.turnerswar... (Search for Sanding Jig)
Jewelers File - amzn.to/3bRN5Jp
3/8” Bottle Brushes - amzn.to/3eNOhjJ
Turning Accessories:
#2 MT 60 Degree Drive Center - amzn.to/2TmpUzB
#160 MT Degree Live Center - amzn.to/38U6Sqs
#2 MT 60 Degree Live Center - amzn.to/36F27Qg
#1 Mandrel Saver - amzn.to/2Tu6LfZ
#2 Mandrel Saver - amzn.to/2XiEdYb
Tools:
¾” Roughing Gouge - amzn.to/2uGkpDM
¾” Skew - amzn.to/35ozkSV
1/8” Parting Tool - amzn.to/37H3W09
Detail Gouge - amzn.to/37Gmz4o
Chucks:
#1 MT Jacobs Chuck - amzn.to/38oxhfL
#2 MT Jacobs Chuck - amzn.to/38rwDOU
Collet Chuck Set - amzn.to/37e6gf0
Collet for 3/4” Stock (Not Included in set with chuck) - amzn.to/2RAikAv
26 piece set of E-32 Spring Collets - amzn.to/39GYI5K
Nova Chuck - amzn.to/2W3v1YG
Nova Mini Jaw Set - amzn.to/2vVzNN8
Bits Taps & Dies Starter Bits - amzn.to/36blqjN
27/64” Drill Bit - amzn.to/2VxDBOX
Drill Bit Set - amzn.to/3apKt6d
M10 x 1 Die - amzn.to/33cd7EG
M10 x 1 Tap - amzn.to/33670S6
M13 x .8 Die - M13 x .8 Tap - Tap & Die Set - amzn.to/38oxFLf
#1 MT - Tap & Die Tool Holder - amzn.to/3awtFtY
#2 MT Tap & Die Tool Holder - amzn.to/2NJu4zK
Sharpening: Rikon Slow Speed Grinder - amzn.to/2TIq2LR
200 Grit CBN Wheel - www.woodturnerswonders.com (Call For Proper Fit: (678) 400-8181)
Wolverine Sharpening System - amzn.to/2xMPZBp
Dust Collection: Dust Deputy - amzn.to/3cdxOUF
Dust Right Lathe Dust Collection - amzn.to/2Pvd2pW
Craftsman 16 Gallon Shop Vac - amzn.to/2T6Nz8w
Finishing:
Turning Sandpaper - amzn.to/2RziHLP
100 Grit Sandpaper - amzn.to/2zm5twl
Zona Paper - www.turnerswar... (Search for Zona)
Non-Stick Bushings - amzn.to/392M5l4
Penn State Thin C/A Glue PKCAFIN www.pennstateind.com
Starbond Aerosol Activator - amzn.to/3832Fjr
Starbond Medium C/A Glue - amzn.to/2T5zMif
Micro Mesh Pads - amzn.to/2GFigKU
Renaissance Wax - amzn.to/2I3Zb5O
Buffing Wheels - amzn.to/2teAz6D
Milescraft Pen Press - amzn.to/32zjn8Z
Metal Lathe:
0000 Steel Wool - amzn.to/30Mr9M0
½” Aluminum Rod - amzn.to/3at0Ej1
1/2” HDPE Rod - amzn.to/30EyTiU
Mineral Oil - amzn.to/2v7NQ1A
Brushes for Mineral Oil - amzn.to/2TCREl0
Digital Calipers - amzn.to/2NLuJ3t
HSS Cutting Steel - amzn.to/2RBM8Nm
HSS Parting Blade - amzn.to/3auoIC8
Punch Tool - amzn.to/2XXClpD
Metal Marking Tool - amzn.to/37o7Gnr
Other:
#1 MT Taper Mate Morse Taper Cleaner - www.woodturnerscatalog.com
#2 MT Taper Mate Morse Taper Cleaner - www.woodturnerscatalog.com
7/16” Wrench - amzn.to/3ePikr6
Acetone - amzn.to/2yovew5
Nitrile Gloves - amzn.to/2TIpNjV
Parker Ink Refill (Black) - amzn.to/2REsVux
Parker Ink Refill (Blue) - amzn.to/2TFsLp4
Parker Refills with Springs (Black) - amzn.to/319RW4O
Thin Rip Jig for Table Saw and Router Table: amzn.to/2wl3WFU
Pen Disassembly Soft Grip Pliers - amzn.to/32wWeUG
Celtic knot blanks are always fun to watch come to life when they get turned, even if the blank length wasn't quite right.
Yes they are, I love turning Celtic knots.
You are absolutely right things don't always go according to plan. Thank you for a great video.
Thank you Dave,
We all have those days and anyone who says they don’t isn’t telling the truth.
Regards,
Bob
Bob, very cool kit, I know you will find the perfect blank to turn!
Thank you Fred.
Regards,
Bob
Nice kit Bob ! Take care and will see you again 👍
Thank you Kwstas.
Regards,
Bob
Yea Bob I had the same thing happen to me. I've been kicking myself for sure so now I'm being more careful and watching myself.
This was a total accident. I have made a new tube for the kit and will locate a new blank and get it turned.
Regards,
Bob
I hope you find another kit that blank will work with. Nice you will be able to use the kit looks like it’s a winner.
The kit is a cool one and all I need to do is find a blank for it.
Not sure what kit I could use for the blank but if I find one…
Regards,
Bob
Yep I had a woodcraft wall street ll pencil kit that I was making a pen and pencil kit to match with the tiger stripes blank I got a couple years ago at the mid-Ohio pen turners gathering but when I got both turned the tube that was in the kit was to long. So I have a pen but the pencil didn’t work. Thanks for sharing Bob
That is a shame. I spoke to Bob and. He wasn’t sure if the wrong tube came with the kit or if he mixed it up with a tube from another kit. No worries, I’ve made a new tube to the proper length all I need to do is find the right blank to put with it.
Regards,
Bob
Awesome video Bob , glad to see my friend
Thank you Donald.
Regards,
Bob
That's a nice kit.
Thank you Mark,
With a replacement tube made, all I need to do is find the perfect blank and you’ll see this one again.
Regards,
Bob
What a great shame Bob.
That is a nice blank and a generous gift from Bob.
Just a thought could you drill out the tube in the blank and then insert the correct sized tube an glue a contrasting section top and bottom?
I know it would be extremely fiddly with very precise drilling but it could work and you would only need to drill out 1/2" or so from either end to glue in the new tube sections that would accept the kit "end caps" and the component parts of the pen.
Take care Bob.
Cheers, Huw
That is an interesting idea Huw and I tried it once before. I might be able to make that work with a full blank but one that’s already turned is so thin that I’d probably crush it trying to drill it out.
Regards,
Bob
You can always turn a dowel to fill the tube to the length needed which would support it.
Just a thought
i seem to be creating plenty of opertunities lately.
i wonder could you make a blank from carpenters pencils. sand the paint off the sides and glue piece together to create an angled blank then turn that. could be a bugger to turn but would be cool
Cool idea Alan.
Not sure what I’ll do with this kit just yet. I’m still figuring that out. 😀
Regards,
Bob
Very good jop...... congratulations from Greece
Thank you very much. 😀
Regards,
Bob
This happened to me not too long ago.
It’s disheartening when it happens.
Regards,
Bob
Bc maybe you could use some old oak that has been stabilized. The oak from the 1800s.
Hello Rick,
I used some oak recently from the 1640’s. Did to send me some 1800’s oak? My memory is not as good as it use to be but if you did, I can look for it and see if it works with the kit.
Regards,
Bob
@@RJBWoodTurner Bob I had sent you some maple old oak and some other wood over a year ago in a medium size box you did a video on all the packages that you got that day from the post office. I hope that helps. The oak was from the 1800s. It was from the mud sill of a house built in 1840s.
I will look for it.
@@RJBWoodTurner the box I sent it in was medium size white Post office box. I hope you are able to find it.
Hello Rick,
I have spent the day looking for the blanks you sent me. I put the persons name and wood type on every blank I receive. I wish I could send you a photo of the boxes of blanks on my shop floor. There is still a ton of wood in the loft but so far I haven’t found your blanks.
I do apologize, I know they are here some place and they will eventually surface.
Regards,
Bob