My Wife Hates My Furniture
Vložit
- čas přidán 18. 05. 2024
- My wife asked for one table, so I made her ten... She wasn't thrilled with what I came up with.
Enter the End Table Giveaway: www.blacktailstudio.com/walnu...
Order N3 Nano Finish: n3nano.com/
Check out my Epoxy Workshop: www.blacktailstudio.com/the-e...
Snodgrass bandsaw video: • Mastering Bandsaw Tuni...
Stump to table video: • Stump to Table - Woodw...
How to carve oak base: • Carving Two Tables to ...
Items used in this video:
My Marking Knife and Merch Sale: blacktailstudioshop.com/pages...
LED Hardwax Oil: blacktailstudioshop.com/pages...
Festool Big Router: www.blacktailstudio.com/festo...
Corner Clamp Brace: www.blacktailstudio.com/corne...
Vac Bag Film: www.blacktailstudio.com/vac-b...
Bleeder Cloth: www.blacktailstudio.com/bleed...
Vacuum Catch Pot: www.blacktailstudio.com/vacuu...
Vacuum Bag Tape: www.blacktailstudio.com/vacuu...
Peel Ply: www.blacktailstudio.com/peel-ply
Vacuum Bagging Kit: www.blacktailstudio.com/vacuu...
Deep Pour Epoxy: www.blacktailstudio.com/deep-...
Miter Saw Hold Down: www.blacktailstudio.com/miter...
Rotex 150 Sander: www.blacktailstudio.com/rotex...
Light Bar: www.blacktailstudio.com/light...
Oliver Planer: www.blacktailstudio.com/olive...
Oliver Jointer: www.blacktailstudio.com/olive...
Respirator helmet: www.blacktailstudio.com/power...
Scraper: www.blacktailstudio.com/scraper
Threaded Inserts: www.blacktailstudio.com/threa...
Parallel Clamp: www.blacktailstudio.com/paral...
Festool 150 Sander: www.blacktailstudio.com/festo...
Festool Planer: www.blacktailstudio.com/festo...
Festool Router (Medium): www.blacktailstudio.com/festo...
Miter Saw: www.blacktailstudio.com/miter...
Furniture Bolts: www.blacktailstudio.com/furni...
Track Saw (smaller): www.blacktailstudio.com/track...
Rotex 150 Sander: www.blacktailstudio.com/rotex...
Respirator helmet: www.blacktailstudio.com/power...
Scraper: www.blacktailstudio.com/scraper
00:00 Introduction
01:47 Making the patterns
03:17 I'm the poor one?
04:41 New improved denim process
05:46 Solid wood table base(s)
07:31 Removing from the vacuum bag
08:04 Giving away one of my builds
10:13 Modifying the bases
13:00 Relatable problem?
13:50 Old process vs new
14:59 XXL Bandsaw cut
17:02 Hand plane vs jointer
19:03 This really made the base
20:54 Surfacing 11 denim tops
22:08 Surfacing recap
23:43 This was hard to admit
25:56 Bandsaw taper
26:53 "Perfect" hole
30:05 Bandsaw circle jig
32:08 Finishing process
33:26 N3 picked up by Woodcraft
34:21 Table "tasting" with my wife - Jak na to + styl
She married him because when she asked him "what do you bring to the table?", he answered "I bring 9 more".
😂😂
Naw man, he Dropped the BASE!!!
😂😅
It is a bit of a flex when you can say, "I built the table"
Lol
I don't know if you realise but what makes you much better than other woodworkers (apart from the amazing work) is the constant yapping we love it
I was thinking about the other day. Something about the vibe here is different. Like bourbon moth or Keith Johnson feels like if I had enough money I could order a commission but something about blacktail feels like even if I had enough money I would still need to "know a guy" to get a piece. It feels more exclusive for some reason
The dude has a PHD in Yapanese
Definitely not a woodworker
@@saltwaterrook4638 and you definitely don't have a brain
@@saltwaterrook4638 He seems like one to me.
Love how you knew exactly what she would pick but still made all the options so you have fun making stuff.
Hey Cam, I'm a blacksmith and I've worked with damascus steel a bit. One thing that struck me when you said that the Giraffe pattern being disappointing is that all the best patterns in steel are the more symmetrical or ordered ones. I think the style is organic and random enough on its own, so an ordered base pattern tends to look best.
I also have two suggestions I'd love to see you try to mimic: first, feather (sometimes called flame) pattern and second: a mosaic of some sort, the most common being "star", "burst" or "explosion" patterns. I could try to explain these, but I think it's best if you just look them up here on CZcams.
Great video as always!
All these tables are pretty cool, but 'Islands' is my favourite. Great video.
+
Damascus Denim - so hot right now! Awesome work, Cam.
Ayyy hacksmith❤❤
holy shit its the lightsaber dude
Denimascus
@@notstazzmann9429and the halo energy blade dude
Lol Hacksmith watches this channel. Awesome.
I think the giraffe patterns gonna take the cake!
Edit: what the fuck
It’s like a comment from my soul 😂
LMFAOOOOO The edit had me dying 😂
lmfao
😭😂 rip
it looks like a brussel sprout burrito cross section
"If it turns out lame, call it a Bourbon Moth table base or something." LMAO! FnA Cotton, that was a good burn. Blacktail Studio and Bourbon Moth are two of my absolute favorite woodworkers!!! I hope you two become besties. I would love to see a big collaboration.
I agree 100%
I heard Cam say this and packed out laughing....
Same! The (hopefully not genuine) beef between these channels amuses me more than it has any right to 😂
This is honestly so sweet, it seems like you guys have a very healthy relationship! You made a real effort to wow her with the options and some patterns / color combos that you knew she'd like and some you knew she wouldn't, but, ultimately, still made her a top that perfectly suited her taste and respected her decision, despite your own opinions. I got such a kick out of your wine tasting-esque display of the different tops / bases, your delivery was spot-on. And props to your wife for genuinely comparing the different styles in an attempt to find one she would like, even after seeing the oak top ;)
Shoutout to SB Mowing - "that nice kid that cuts people's grass for free" - a real hometown hero of mine here in Wichita!
i thought he was talking about Al Bladez, but that is ok, they are both nice kids
@@itsROMPERS...Everybody needs money to live. Would be nice if it truly was free in every aspect but it’s the next best thing: being able to make a living while taking money from no one, except the massive corporation CZcams.
@@itsROMPERS... No shit, Sherlock. Obviously he's making money from views and sponsorships. That's not the point. He's still doing it for people who can't afford it, and he often even donates the extra mowers and equipment he gets from sponsorships to the people he helps out.
That’s the kid!
@@itsROMPERS...It’s not cynical, it’s fact, and he’s open about it. People watching and buying merch and such is what lets him do free work. He says as much in many videos. He’s very transparent about it.
This is a hilarious amount of work for what was boiled down into a 6 minute denim sommelier bit. I'm here for it. Dying laughing the entire time. I also spent 6 weeks on a nightstand build just so I could do a post about my SO wanting a One Night Stand for her birthday.
… I may have to steal that
Indeed thy the words of thee wise one who we will shall learn from all hail wise one❤❤😂😂 jk all jokes aside you should def make a video about this it will be a hilariously serious video?
Stealing this for my SO when i make him a night stand for his birthday!
What I loved most about this video was the way your lovely wife looks at you. It is so obvious that she is absolutely in love with you - and you with her. While your self-depreciating humor makes me laugh, that wonderful love-filled banter between the two of you made my heart soar and brought tears of happiness to my eyes. God bless you both!
Honestly I love when you went all the way through and the wood is there with the denim
"Just like the blue in your eyes..."
Wife: "...."
"GREEN in your eyes."
Wife: "yeah."
LMFAOOOO
Well he has partial color blindness so mistakes here can be forgiven ;)
37:33 for those who want it again LOL
A guy that my partner was dating for a minute actually bought her a green necklace because he said it matched her eyes, which are actually blue. He wasn't around for much longer.
🤣🤣🤣🤣🤣🤣🤣
@@curtisbme rip
Rounding the edge on the pyramid base was ABSOLUTELY the right choice went from "yeah ok" to "DAMN DANIEL" IMHO
"Damn!", is my exact thought
the tups were ok, the bases were awesome!!
The "Islands" top is my favourite. Beautiful when you showed it as the first option with that base. I also love the foil trial as well.
Mine too. Probably more so for the colors than the patterns tho, tbh.
Obviously there are more of us out here spending more time enjoying your content (including the sarcasm and amusing wife stories) than analyzing where you and she fall on an "SMV chart." And I, for one, appreciate you putting that individual on a pedestal for our collective side show mockery.
I work in the paint dept in a big box store, and our record was 52, so your wife is the new record holder. Congrats! Have you thought about painting the wall plaid?
I’m glad to see she wasn’t just a small time regional record holder.
I may have to go and check my local paint store’s record which is in Australia. Your wife might have a international record for the paint sample’s. All jokes aside that is one hell of a record to hold as I’m pretty sure there is a limit to how much you can take in one visit?.
Oh to be clear, she paid for each sample. I think they’re around $4 each. So they would have happily kept selling us more.
Not plaid. You mean mosaic.
@@BlacktailStudio as someone who worked in a paint dept, I would've angrily made all of those samples with a big smile on my face.
"I can see by your face you're impressed" hahahaha
Dragon!
the guy who asked why she was with him.. its not money.. its how he makes her laugh. she clearly likes spending time with him. i hope i find a girl one day who giggles like that with me :')
Hahahaha
You crack me up! I just realized that you pop into my feed so often that I hadn't realized until today that I haven't subscribed. Fixing that now. My favorite table top was the raindrop--I thought that in the right place it would be stunning.
I must say that all the samples you provided are of exceptional quality and it's difficult for me to single out one as my favorite. I appreciate the effort and dedication you put into creating each one of them. In fact, I believe all the samples should be showcased to the customers to give them the opportunity to choose the one that resonates with them the most. Love it love it ❤😊
As an architect, I'd love to see a video tour of your home showcasing all the exquisite woodwork and furnitures, like a parade home display.
Your work is truly commendable! 👏🏻
Me too.
I agree. Your home is a beautiful contemporary and I’d love to see more.
Being vulnerable with what you don't know, showing us your mistakes and trying stuff you shouldn't do is part of what makes this channel successful. You come across as a hard working guy who is constantly learning and growing and that's super relatable.
Completely agree with this comment.
ya he's the real MVP woodworking channel
+
I love all of your tables you made. I especially love the Island table top. Both stands are exquisite. I like the thin one so the attention stays at the tabletop. Beautiful as always!
Thank you
Susan
Hey Cam, Thanks for another awesome video. I was totally captivated by the production and presentation of the vintages. You and your dear wife have a great story and I wish you many more chapters. Truly appreciate your skill and dedication. Cheers
I love that Scott has turned into more than just filming and editing. You guys work well creatively together. It's nice to have a second set of hands in the shop. I think we all can say that.
You left out the very best part of your first Denim/Epoxy run. When you walked into the shop and there was a new 1/2” thick epoxy floor. One of the funniest moments of any CZcams video.
For me it’s a toss up between islands and dragons. The whole process is pretty interesting.
Agree! I felt that pain!!!! 😂😂😂
My favourite is the pepperoni pattern with the islands colour scheme. The islands table top went amazingly well with the oak base. Great work! Your wife seemed so happy to have the final piece picked out and in your home.
Same! Pepperoni pattern in the islands color scheme. The blue is nice, but juuuust a wee bit too bright, in my extremely humble opinion.
this was great! I skipped at times, but seeing the process, hearing you talk and then the final presentation, it was very delightful!
Scott The Video Guy is an absolute MVP.
Amazing footage, editing AND he makes sure that Cam doesn't end up accidentally killing himself by doing the worst possible decisions at every turn!
this is the first time i've seen this kind of interaction between you and your wife on camera and i can definitely see it now, why your wife is with you.............. you make her laugh! that is clear by the way she smiles and laughs around you. with all the train wreck of marriages on display these days it's nice to see a couple who clearly still love each other and enjoy each other's company. i wish you both many, many more happy times down the road.
That was my thought exactly. :)
He makes her laugh.
My gosh, every time I watch your projects, I’m blown away by the beauty of it. You’re so talented!
Love watching your videos.
I work with leather and my boss wants me to get into live edge and figure out how to incorporate leather. I'm learning a lot from you including the do's and do nots.
Thank you and don't stop what you are doing.
Honestly, that Black & Tan goes perfectly with your furniture and the room position.
It hit home as soon as you lined it up. Feels like a real coffee morning moment captured in a table top.
Great work.
True, I said Dragon but that one did fit the decor very very nicely.
Black and tan but using the Burgundy pattern. That would be perfect IMO.
When you mentioned a commenter saying hot people are only with ugly people if the ugly person is rich, I immediately disagreed, because obviously hot people are often with ugly people if the ugly person is funny. Then I saw your face and thought, "how hot is his wife that people think HE is ugly?" And also, "good thing he's not ugly, because he isn't very funny." Then I saw you showing off your creations to your wife and realized you simply save all your comedy for her in particular, and decided I needed to comment to tell you just how cute you guys are together.
Oh, right, your videos are cool too: even though I think I share your wife's taste in furniture rather than yours, it's always delightful to watch and listen to the process, especially as a novice woodworker who's got quite a bit to learn.
I think Cam is quite handsome and I love his voice and self-deprecating humor.
people who don't think Cam is funny are not listening closely enough to the sly jokes and innuendo throughout the video, like around the 13-minute mark. "Think about something else" "I do a practice glue-up by myself" 😂
Modern women belonging mainly to this current generation are kind of a dumpster fire, and one can tell this is true, because they're all over social media, telling on themselves.
They are, to borrow from Rodney Dangerfield in the movie "Caddyshack," "Why tigers eat their young." It really is, frankly disturbing.
One, Cam is not ugly, he's actually quite handsome.
Two, he's only not funny to people who don't recognise humour if it's anything deeper than dad jokes. He's hilarious and does sarcasm well.
@@dlghtfl1100%. As a straight man, even I can see that Cam is hot. No idea what that guy was talking about. And he clearly has no idea who Cam's wife is; she owns a very successful matress company in our area and is literally in the commercials.
You have no idea how much I enjoyed this video.
Thank you!
Cam thank you for the ideas. I'm done construction in my early adulthood. I wanted to work with wood my wife wanted a fire place mantel. We went out and picked up live edge wood . Your videos are inspiring and can't wait to use oil finish then N 3,band nano pro finish protection kit on the mantle.
Love how when you put out the word that you were hiring, you Said you didn't want someone to intervene unless you're hurt.
Now Scott has slowly but surely become your right hand.
I think these are Scott's last videos, right? I like his honest critiques too. It's great that he isn't a Yes Man.
“If it turns out cool, it’ll definitely be a Blacktail Studio Original. If it turns out lame, call it a Bourbon Moth table base or something.”
🤣🤣🤣
That had me in stitches🤣
@@LG-ct8tw His face probably after hearing that line: 😒
I nearly choked when I heard that one. 😂
I can't tell if this is just banter or an actual jab.
Ouch.
The results are fantastic and I could not decide, which is my favorite !!!
That raindrop looking top is breathtaking! Though honestly the red-white-blue is the only one I wouldn't immediately jumo at if I had a chance to put it in my home.
For these smaller rounds I definitely think the more slender base works best.
Lovely work as always.
Love the casual jab at Bourbonmoth woodworking 😂
@ 10:35
I lived that too. 😂
Having no idea who that is clue me to what they do or don’t do well please
@@Doubie. Just another woodworking CZcamsr. He famously hates epoxy, so that's probably why he took the jab lol. But I think they're on good terms
@@Doubie.
He also set up a fake spontaneous combustion test, AVE, hammered him.
Hey Cam! I've got a planer tip for you.
To avoid tearout when planing across the grain - start by feeding the piece about an 3/4 inch through the planer so that it creates a lip. Pull it back carefully. Then spin it around (so the lip is at the back and will go through the planer last) and run it through normally. By doing that you'll essentially pre-cut the layers that will not be supported by layers behind them and thus will blowout if run normally.
An old woodworker with all his fingers showed this one to me. It works like a charm.
How do you feed it in without the first roller grabbing it?
@@heyitsthatdude17 I assume he is talking about using the jointer around the 17:00 mark
Love the denim. How many layers do you use? My wife watched this with me and asked if I could make her one. I am retired educator with minimal skills. Thanks. Love your work. So entertaining.
@@heyitsthatdude17 Planer, not thicknesser. The one shown in the video.
@@stusue9733 yep, English is not my first language.
I can't remember the last time I watched a video longer than 15 minutes all the way through. This was lovely! Thank you for satisfying my woodshop urges so I'm not tempted to go buy tools again!
These tops and bases are ALL AMAZING! Personally, I love every single one of them. You are an artist!
My boyfriend is a huuuuuude denim enthusiast and when I showed him the Damascus denim table, he said he wished you would’ve emulated the wear pattern of jeans more (even though he did think the table was cool still). I think the palm design really hit that nail on the head
You are a true hero for building that last table top (for your wife) and not putting it on camera (for us)
Thank you, Cam. That was very funny and enjoyable. I’m glad you used the jointer after it was suggested. So much easier and tearout isn’t so bad with a helical head and light passes. The sommelier bit was hysterically funny.
Shout out to Scott for that circle cutting scene. The almost "seamless" transition between table tops while on the jig shows his editing "genes" are adapting. He didnt "waist" any time with those shots.
this is the most yapping I’ve ever heard in your video and Im just 5 minute in. def what I subbed for, keep it up.
yes i loved the yapping too
Best part
loved the part where he yappity yap yapped about the yap
@@Im_basically_an_Npc indeed. every time he yaps bout anything I’ll just nod my head and said “yup, you tell em cam. couldn’t agree more”
Love the yapping, the interactions, the indecision, the worries. That's human.
I was in aerospace composite fab/layup for a few years. I would suggest if you're going to have a bag that big you should have multiple vacuum ports. Also you want something like non perforated a5000 and breather rope and you want the breather mat to cover the entire interior of the bag to help with even circulation. Also, if you want your plies to be really tight and strong to the mold. Less resin. I recommend a couple of compaction steps in between a handful of lay ups.
I'm a little dusty on the info as it's been about 3½ years. Our process was nice and tight as it was or aerospace control surfaces (some of the highest stressed components). I wouldn't mind sharing more suggestions or bounce idea, trouble shoot issue, etc.
I want to see blacktail testing mythbusters episode!
I remember the first denim table you did and how the process went horrifically. Your viewers probably gave you great ideas on how to do it better. And you execute so well. You learned and now your killing it. If you aren't making mistakes you are not learning.
The black/tan color pattern on the islands top is by far my favorite color combo (I'm a sucker for "Naturally Plausible" colors, though the colors on patriot and black & gray would be a good 2nd and 3rd to me. Pattern wise, as much as I HATE paisley on fabrics, the paisley pattern is pretty awesome, dragon and islands coming in at 2nd and 3rd.
Been watching your stuff since you first popped up on my youtube, and I gotta say how much I love seeing your content. I recently got to see an antique table with a dark finished wood that had green marble and white marble inlaid into the wood, and I immediately thought of your videos and I'm hoping to get to make something similar to it in time, and I feel like your channel has so many GREAT ideas for how to accomplish it.
U can tell they really have a great relationsship, by the way she looks at him, smiling and laughing af his shilly jokes she problerbly have heard a milions times before. Him, still trying to impress the girl he fell in love with along time a go, going the ekstra extra mile, making her happy is just so lovely to see.
Now THATS true love, respect, and admiration for your partner, its true love by the looks of it, and true love stands against all ods, love conquers all - and makes alle the sacraffisess worth it in the end!
You are very blessed to have each other in your life!
Much Peace brother, and keep up the amazing work!
Thank you so much for mentioning the Alex Snodgrass video! I'm an Industrial Tech teacher and properly setting up your bandsaw isn't something they teach you in college. I've been fumbling through setting up the bandsaws for the kids for the past seven years. I can't thank you enough for sharing that information!
Wow all of your work is so meticulously crafted and truly beautiful beyond compare!!! I love your creations as well as your videos!!!
My favorite is Islands. The tan matches the wood base and I love the pattern. The light paisley table looks like life changing biopsy results.
Love the "Pepperoni" but I think it should be renamed to "Raindrops". With the white oak base it really made that bright blue pop beautifully.
After staring at these for a bit I think Dragon is my fave. I bet it would look great with a walnut base. Also I like your wife’s favorite base best too.
Really liked the video. As a married man, it felt good to see that with time you get to know your wife and before she chose the table top you already knew what she would prefer.
I liked the dark denim
When I bought my first (lower range) band saw I had so much trouble setting it up. The saw would swerve everywhere all the time, I even replaced all saw blades with more expensive ones, still nothing, it was horrible. Then I set it up listening to Alex Snodgrass' video and I can now cut consistent veneers down to a quarter of a mm (that's about a 1/64 of an inch I think) on that same band saw no matter what blade I use. I even had to show the shop owner, where I bought it, how I did it. They now refer to that same video for other customers that are having trouble.
All the tables turned out beautifully! I prefer the dragon top! I enjoy your narration of the video! Thank you, it a joy to watch!
I am 18, and have virtually no interest in woodworking. However, I always look forward to your videos because of your constant talking and humour. Love the videos!
In fact, I think I may have even lost interest in wood working...
Never doubt Scott. That man is an Emmy Award Winning Genius!
He was a great add to the channel!
Guy doesn't even know what Alien is.
don't wotty scott you can marry me
I love your work
you are a master
Great job! Your intelligence and sense of humor are a great part of why I love your channel. My 3 favs: Islands, Dragon and (Patriot - though greens and blues might be better than red for my personal taste.)
That was great! I think the black&tan went best with the light bases. Fir does have a cool grain, even if it is very utilitarian. Thanks very much for the opportunity to enter for the walnut table giveaway!
In 2010, my fiancé and I moved across the country and bought a house in a new city. We went into Home Depot and separately gathered paint samples. We literally came back with the exact same 3. Then he picked tiles for the backsplash as I was looking looking looking at tiles. What he brought me was exactly what I was looking for lol. We damn did get married! I dunno how I got so lucky to meet him.
The underside
Now hear my out … when you took them out of the vacuum bags around 9:40, there was a quick glimpse of the plywood on the bottom. If you used hardwood for a pattern, that could be sanded down for a wood “inlay” look. 🤷♂️
Great vids, always glad to watch and kudos on the Woodcraft deal 👍
Yeah I was surprised he decided to bin the one with dowels coming through.
That lighter blue one Pepperoni is my favorite. It makes me think a rain drops in a pond. I like Lightning as well. I understand starring at a project for hours. I sew and sometimes it takes me a pretty long while to figure out what the fabric should become. Sometimes I change mid-project.
Cam, they are all really unique and striking. My favorite top in the denim line is the "Islands". With the different shades of browns and black, it will blend in with most furnitures creating a contrasting piece. Good job in giving your wife so many options to choose from. And for knowing what she really likes. The oak end table is quite nice and will never go out of style. As a matter of fact, your pieces are "one off" and will never be passe or dated. Can't go to the furniture store and see any that can compare to your unique styles.
Hi Cam,
I just wanted to thank you. I am from Germany and currently in the beginning of my training to become a professional woodworker, and thats by no small part because of your awesome channel and builds. I started at Uni in October '23 studying to become a teacher but it didn't feel right. Decided to look into woodworking and stumbled upon your channel, wich really helped deciding that this is my way to go forward. I've probalby watched most of your videos at least 5 times if not more, i love seeing woodworking, love english and to be fair, german woodworking channels are just mostly boring explanations or reviews, no entertainment.
So yeah, long story short. Thank you so much for helping me finding my way in life, finding my passion. And for making everyday just that little bit better and enjoyable. Love your work.
Dragon stands above the rest, with paisley in second. Wouldn’t mind seeing Dragon in my basement that I’m nearly done finishing.
The jokes per minute in this video were off the charts. Fantastic vid, fantastic sense of humor.
For the pattern of the bottom from your table base: Sunflower seems like a good name! I like the second one wirh dark denim the most, great work again!
good job. she knows you love her and it shows. I like your favorite top the most.
One wine maker mentioned the "mound of despair" the dimple in the bottom of hand blown bottles that ensure they can stand up; it was the mound of despair because you thought there was a full glass left, but there wasn't. this seems similar to cutting grooves in the bottom to help it lay flat.
In case of wine bottle it helps their structure.
The pepperoni table, because when you said "raindrops" it instantly became THAT, and I loved it right then. I also find your running commentary just delightful. thanks!
I love how the island pattern turned out and thought it reeally would suit with the chairs and the warm look and vibe of the room. amazing video as always and love your sarcasm and edgy jokes haha!😄💜
My first time commenting so as my grandma always told me to do, I'll start with a compliment. I absolutely love your videos, the friendly banter you maintain with the audience, peppered with jokes that you know most people won't catch or understand, really separate you from the masses of CZcams droll.
Also you and I share the same hairstyle, so immediately I know you are a man of refined taste.
As for your creativity and skill, I am enamored by everything you create, obviously in a manly brotherly type of enamoring. You have inspired me to move forward with my own furniture building which we have yet to see if that's a good or bad thing.
For this build, I resonate with the dragon design in dark denim. Of course your wife knows best *wink wink
The denim and tinfoil is fantastic! Cant believe you showed it for less than a second at the end
Loved it, especially after she picked the wooden one! Priceless
The Dragon and pepperoni patterns looked the best to me. Nice work as usual on all the pieces including the bases.
Was surprised at how much I loved the blue pepperoni design on the thinner table base!!! It turned out to be my favorite but I also loved the tan islands as is and the black and grey color palette, plus the dark denim you both liked :) awesome video as always!!
@BlacktailStudio (Cam) I love how you've evolved over the years from straight up wood working projects into working with different mediums. Also I've never commented on your videos before, but over the last two years I've really come to appreciate your subtle (or not) dirty jokes. This video was no exception!
As a carpenter from WA, now living in SE Asia, your videos are flippin awesome because I feel like I'm hanging out in one of my buddy's garages back home. We used to bring the scraps home from job sites and make things like 'Little Free Libraries' and such. I'm making a trip home this summer and visiting some friends that live close to you. It would be a trip to run into at the local watering hole or somewhere in town. I know that's not likely, but thanks for being your authentic self my dude! ~Max
Yeah, you got that right. I feel like a welcome guest rather that just a viewer whenever I watch this channel
I love how going into this, you already knew you needed a non-denim option but you didn't let that hold you back. You still took the time to make all the options you needed to see anyways. Well done!
Islands is my favorite. I'd love it in my house with the same base that your wife prefers please. Thanks. Excellent work as always sir
Pepperoni on black and tan with those arm chairs you have..but they all are so unique and fun...another amazing project Cam..
The staring blankly at a project sounds like a perfect April 1st video. No commentary, just staring blankly at a vacuum bag from different angles.
this is the best tabletop denim channel on youtube!
+
I love fir! It looks amazing with a classic oil poly and a few years of yellowing.
I want to start this comment off with the fact that I watched all 40 minutes of this video.
You're wife is spot on. White oak for the win.
You asked which one we like the best. 😂😂
The commentary just makes the video 10X better!
THE DENIM AND FOIL WAS MINDBLOWING
I honestly love the way your wife and you interact. Its adorable how you guys just kept riffing off of each other's jokes. So goddamn healthy.
Also Cam, you're extremely handsome. Not many men pull off bald so well.
The burgundy and dragon are my favorites. You did a great job with tons of options
The Islands and Palm really PoPPED! I would have like to have seen a deeper finish on the Patriot and Burgundy. I could be wrong but it seems like different finishes and so that makes it really difficult to compare. I actually love all of them! VERY Creative and different!
"I have a wife who likes options... ...presumably not in a marital sense". Only someone secure and confident in their relationship could utter such words. Lovely to hear mate and may you both enjoy a long and happy life together, as my wife and I are enjoying! Cheers and love your work - from Sydney - Dave PS. Denim looks amazing IMHO!
I was starting to think nobody caught that line. thanks for noticing
@@BlacktailStudio Oh we do notice, don't you worry
@@BlacktailStudio Mate, thousands are hanging off your every word!! 😁 Actually, these little quips really add a lot and keep us engaged.
Absolutely the best voiceover copy in the history of woodworking CZcams!
I love that the general consesus is Cam is a yapper, but we are all cool with the yapping. Favourite yapper of all time 👏🏾🥰
My favorite denim is the light denim outfit at the end. In all seriousness these are all bangers, I can’t wait to see more of the denim tables!
I've always appreciated your channel for myriad reasons. But this video confirmed for me that you stand out for your humor and script content. Your self depricating humor and tongue in cheek dad jokes are awesome.
Cam that was one of the funniest videos you have made. Describing the patterns and coloring with your wife was a great touch! You are a great story teller and teacher! Love your videos.
It's so cool how you invented the ellipse! Can't wait to use this shape!
The islands pattern and colours is my favorite, thanks for theses great contents