DIY Universal Track saw guide with self clamps - Circular saw Jigsaw Router guide

#plywoodworking #DIYUniversalTrackSaw #BestTrackSawGuide
If you like The video Please Subscribe and share this channel!!
DONT FORGET join on Plywoodworking Tips & Trick Group on FB !!
easy for download FREEPLAN
Follow Plywoodworking group and Page
/ plywoodworkingtipstrick
/ 479435482886643
/ plywoodworking
Today I'll show you how to make an MDF jig, this is universal jig basically circular saw into a fully functioning Track Saw but you can use this for router guide, jigsaw guide and for fence table saw.
i complete this track saw with self clamp, very practice not need addtional clamp again, easy for use and very cheap. make this onle need under $10.
hope this video can give inspired
Hope you like it and don't forget to like, share and SUBSCRIBE...
Thanks
---------------------------------------------------------------------------------------------------------
Song: "Sappheiros - Embrace [Chill]" is under a Creative Commons license (CC BY 3.0)
Music promoted by BreakingCopyright: bit.ly/Sappheiros-Embrace

[@plywoodworking]

If you like The video Please Subscribe and share this channel!!
DONT FORGET join on Plywoodworking Tips & Trick Group on FB !!
facebook.com/groups/479435482886643/

[@waihungleung9699]

aa

[@delboy5277]

Just the video I have been looking for. Simple but absolute genius. Best toggle clamp system I have seen and with so many different applications.

[@plywoodworking]

Thank you, hope can give inspired for your project

[@valterleao6795]

Show meu Amigo, gostei MUITO, tirei até umas ideias vendo suas habilidades!
Abraço aqui do Brasil 🇧🇷

[@plywoodworking]

glad hear that , thank you hope this video can inspired

[@suprememasteroftheuniverse]

Amiga.

[@crossgrainwoodproductsltd9230]

I'm watching this video for the second time so I could take notes of measurements. So far, this is the "track saw" I like the most! The other one has rails and linear rail bushings and the saw is suspended above the piece to be cut. I want to make it like a panel saw only smaller and portable if needed. It will be for cross-cutting. Thank you again for a great design and for sharing it with us, the viewers.

[@plywoodworking]

Glad you like it! thank you very much!

[@j.w.m.rhynejr9766]

Great video on multifunctional design and use of the tools and your made platform! Awesome versatility on the finished piece. Thanks for sharing. Looking forward to more videos on your experiences.

[@plywoodworking]

Thank you hope can give inspiration!

[@samhazen6776]

That is a great track. I love the self clamping.

[@plywoodworking]

Thank you

[@denniswatson2740]

Very impressive. I will be making one shortly. Thanks for the tutorial.

[@plywoodworking]

glad hear that, hope can give inpsired!

[@shripadlale7476]

Beautiful design, and flawless execution! I am going to make one. Thanks for sharing!

[@plywoodworking]

Thank you! 😊

[@jimmatrix7244]

Have you done it?

[@shripadlale7476]

@@jimmatrix7244 😄 reminded me of a meme: “when a man says he will do something, he will do it. There is no point reminding him every six months”!! So, no, but the intent exists.

[@jimmatrix7244]

@@shripadlale7476 Well, procrastination is also an activity.😊😊

[@IEnjoyCreatingVideos]

Great work on the universal track saw guide Friend! Thank you for sharing the video.👌👍😎JP

[@plywoodworking]

your welcome hope can give inspired

[@IEnjoyCreatingVideos]

@@plywoodworking😎

[@gusntroll]

This is só simples that It hurts all other complicated projects. Good work and good video.

[@plywoodworking]

Thank you so much

[@Sebastopolmark]

GREAT video, easy to follow along and very well documented. I like the clamping system, simple but IT WORKS! !! !!!

[@plywoodworking]

Thank you very much

[@jarmstrong2843]

This is a nice easy to follow project. Thanks!
I am one who is a stickler for safety and have seen way too many industrial accidents as a safety engineer. When using the mitre saw, let the saw blade come to a full stop after the cut in the down position. Then raise the blade to remove the cut piece. Even though the blade has a safety guard, I have seen blocks of wood flung across a room by a rotating saw blade despite the guard in place. This can pose a hazard to you or others in the vicinity of the saw.
Be safe. Nice project!!!!

[@plywoodworking]

thank you for your suggestion i will more carefully on next project. hope this video can give inspired

[@theodoclegroland8801]

Just brilliant. Thanks for sharing. Cheers from North of France.

[@plywoodworking]

Your welcome hope give inspired

[@BillSands2112]

That was AWESOME!!!! thank you

[@plywoodworking]

Thank you

[@dottie3440]

Another magnificent "gadget" for my workshop ..... thanks!

[@plywoodworking]

Fantastic!

[@LBCAndrew]

So i came up with an almost identical design on my own that i finished today and found this video looking for ways to clamp the track in place and wanted to point out something very important. DO NOT drill all the mounting holes in the saw base plate at the same time. Drill and tap the aluminum rail (i used three 1/4"-20 machine screws) using a #7 drill bit, THEN drill the first hole through the base plate. Install first machine screw, then mark the second hole, repeat, and repeat for the third screw. The reason for this is because most people will be using a hand drill and even though a center punch is used, standard twist drill bits almost always walk some when not used in a drill press. Split point bits walk less but can still be an issue. I have 4 holes for three mounting screws in my saw base plate since i didn't follow this advice.

[@plywoodworking]

thank you

[@romihidayat]

Video yang menarik, plus animasinya yang mudah difahami........keren lah bang.......

[@plywoodworking]

terima kasih, smoga bermanfaat & memberikan inspirasi

[@pedrosvaldofrias]

Muy interesante! grcias por compartir tu trabajo

[@plywoodworking]

your welcome hope can give inspired

[@potinodea]

Another great project.Thank you for sharing

[@plywoodworking]

You are so welcome

[@josemanoelgferreira9418]

The best project about wood cutting guide. Congratulations my friend and thanls for sharing your knowledge.

[@plywoodworking]

thank you very much hope can give inspired

[@williampitts5818]

@@plywoodworking o no ygfcx no

[@Sly_Wolf_1]

Brilliant! Probably the best DIY track solution I've seen. Thanks for sharing.

[@plywoodworking]

Glad it was helpful!

[@simonelson7043]

Great design very well photographed with clear measurements.
Really excellent

[@plywoodworking]

Thank you very much!

[@jakeforonda6290]

easy to do portable fence! nice

[@plywoodworking]

You can use this not only for Circular saw but multifungtion.
Thank you, hope can give inspired

[@michaelt7191991]

I just watched this video and your miter saw station build. Excellent and easy to follow. I also subscribed! Keep up the great work!

[@plywoodworking]

Thank you, hope can give inspired, if want detail plan size you can download on my drive. Use that plan and see the video

[@christineerickson7549]

Really nice! Making one today!

[@plywoodworking]

Great hooe can give inspired

[@christofix]

Great design. You have tought about this really well!

[@plywoodworking]

thank you, hope this video can give inspired!!

[@MattiaRaggiDrum]

Fantastic!!!! good work man form Italy🇮🇹!!!!!

[@plywoodworking]

Thank you so much, hope can give inspired and enjoy with this video

[@nunoandre4964]

This is absloutely great and the music is epic. THANK YOU for sharing

[@plywoodworking]

Glad you enjoyed it!

[@100gvolpe]

Grande maestro! Molto interessante

[@plywoodworking]

thank you so much hope can give inspired

[@intillzah6160]

Most impressive....

[@plywoodworking]

thank you very much

[@user-wf1gm9yg7l]

아이디어 좋으시네요 굿??

[@plywoodworking]

thank you very much!!

[@JCSchaefer82]

Sangat Chantik! Beautiful jig. This is my new favorite CZcams channel.

[@plywoodworking]

Thank you very much, enjoy with video and hope can give inspired

[@sergiopellacani9722]

Good job 👍👍👍

[@plywoodworking]

thank you very much

[@cw4608]

Impressive design and impressive animation

[@plywoodworking]

Thank you

[@juginstr1019]

Thank you for the video!.Professional and aesthetically pleasing. Good luck with your creativity.

[@plywoodworking]

Thank you so much!

[@abdulhakimkhan1]

Dear amezing, great design

[@plywoodworking]

thank you, hope can givve inspired

[@lgmnowkondo938]

awesome video...amazing actually!

[@plywoodworking]

Thank you

[@user-zv3mo8ue4v]

За видео , лайк ! И за ухоженные руки , не каждая женщина может такими руками похвастаться !

[@plywoodworking]

thank you

[@hjboots]

Your keeping me busy doing all these jigs. lol Keep it up i love all you have done and have built many of what you have built. Thank you for sharing ( Stay Safe you & your family ) .

[@plywoodworking]

Thanks, will do!

[@FantaBH]

Good design, nice work, the perfect guide. Thank you, big like.

[@plywoodworking]

Thank you! Cheers!

[@bernhardtammen4463]

Dankeschön fürs Zeigen

[@plywoodworking]

your welcome

[@AB-C1]

Excellent simple functional easy to follow tutorial and multi functional!
Thanks for a great easy to follow video! I've subscribed to the channel straight away! Definitely going to make one of these in the next couple of weeks! Have a new palm router a full size router plunge router couple of jigsaws and a 3 circular saws so think I'm going to make one of these and perhaps the table saw you made for a circular saw and dedicate one of my circular saws to a table saw! Great work and video!
Thanks from London England 👍😎🏴󠁧󠁢󠁥󠁮󠁧󠁿

[@plywoodworking]

Thank you very much!👍😊👍

[@braunisbastelhutte2577]

Super 👍 gebaut 👏🏻👏🏻 und ein sehr nützliches Werkzeug in der Werkstatt. Danke für das tolle Video 👋🏼👋🏼

[@plywoodworking]

Thank you hope can give inspired

[@FerySanjayaKoda]

funtastic video my dude
im bout to start my small diy thingy too
this is one of masterpiece
grats

[@plywoodworking]

You can do it!

[@naydejamiebernardo4662]

I have to say the video was superb. The animations and measures are almost dumb proof. Subbed

[@plywoodworking]

Thank you

[@Alex_science]

Great project! Congrats.

[@plywoodworking]

Thank you very much

[@brianjennings3172]

Great design, thanks

[@plywoodworking]

Your welcome, hope give inspired

[@azalaka22]

mantap!! salam woodworking indonesia

[@plywoodworking]

maksih banyak mas

[@fco.javiergonzalez7166]

Que buen trabajo, muy buena guía

[@plywoodworking]

thank you very much!!!

[@Dan-tv1sm]

Very nice video and animation combined without words. A very nice system as well.

[@plywoodworking]

Thank you very much

[@scmassey]

you sir are a genius

[@plywoodworking]

thank you so much, hope can give inspired

[@romulusclay6697]

BRAVO!

[@plywoodworking]

thank you very much

[@jayjay500bl]

Grande idea bravo

[@plywoodworking]

thank you very much

[@georgequalls5043]

Another brilliant innovative creation.

[@plywoodworking]

Thank you! Cheers!

[@joser1219]

You nail-ed it.

[@plywoodworking]

Thank you

[@vikramkhaira7070able]

Good idea...keep up

[@plywoodworking]

Thank you, hope can give inspired

[@rikityrik]

Wow, great job. Loved the digital aspect and editing. You’re very talented. Also great execution and functionality of the track, it’s really good.🙏👍

[@danielcole9070]

This is a great design. Instant sub! Thanks.

[@plywoodworking]

Awesome, thank you!

[@alfonsoafricano8415]

Fantastic Video.... the best I have seen in a very long time...

[@plywoodworking]

Wow, thanks!

[@Bianchi77]

Thanks for the information :) cool video...

[@plywoodworking]

Thank you very much

[@petec6690]

Impressive. I've used a straight edge screwed to a scrap blank. Then ran my saw against the straight edge and cut the scrap to match the edge of the saw blade. then whenever I line up the edge I get a straight cut right where I wanted it to. Without all the milling, gluing and waxing. Clamps could be placed on an outer edge away from the saw motor. Your video shows skill and ingenuity, but for a quick and dirty build - using a large enough piece of scrap and clamping it down to a work surface is much easier. The ONLY thing my rig can't do that yours can is to clamp to the table saw as a rip fence. But there are other solutions for clamping rip fences parallel to the blade or even on a severe angle to the blade. Cove cutting for instance. Yours can't cove cut.

[@plywoodworking]

thank you

[@milojames5593]

That track saw jig is as amazing as his nails.

[@plywoodworking]

Thank you

[@p2morris1]

This is the BEST TRACK SAW jig I have seen. would love to have it in my Wood Junky tool box. can I get the plans to make this?

[@plywoodworking]

have simillir project same like this on czcams.com/video/Qq80qS4m1EY/video.html

[@Lethandstry]

Very good working!

[@plywoodworking]

Glad you think so!

[@shakeeshakee9457]

Awesome video thanks.. it does inspire me to make a tracksaw like you just made.. best design I've seen yet very informativethank you again and I subscribed to your channel do to this video 👍

[@plywoodworking]

Your welcome, hope can give inspired

[@janlawrence2303]

very professional

[@plywoodworking]

Thank you very much

[@chachmorales41]

Great job maestro on the saw guide and thank you for sharing. People like you make life more easier and simple in wood working. I'm adding this new tool to my play box. Oh by way, Where did you buy the two small clamps?

[@plywoodworking]

Thank you 👍, i buy mini toggle clamp on ali express

[@hrd2dfyn]

Great track! But I wanna give your video editing a big thumbs up. A lot of people don't realize how much goes into it. The classical style of music with the simple elegant font and then cuts of the digital design....soo good. You just got a sub from me. Keep doing what you're doing.

[@plywoodworking]

Glad you liked it! thank you very much

[@Rick_Sanchez_C137_]

Great video…
remember, if you need it for thicker cuts that the thickness of this might interfere with the cut, there are 8 1/4 and 10 1/4 inch saws…. It will work just as well on those saws and maintain a deep enough cut. (Unless you get a great deal though it would be cheaper to stick with 7 1/4 inch saw and aluminum track).

[@plywoodworking]

Thanks for the info!

[@user-xy9cm7ts7s]

Very good work

[@plywoodworking]

Thank you so much 😀

[@Lugenfabrik]

Bagus sekali.

[@plywoodworking]

Thank you

[@eduardobolivar587]

It is very much working.

[@plywoodworking]

thank you

[@WorkshopFromScratch]

Nice idea and the end result. Paw up and subscriptions😀

[@plywoodworking]

thank you very much

[@bahtierabdulazizov6178]

Laek мендан 🇰🇬

[@plywoodworking]

thank you hope can give inspired

[@yoymao9784]

Tuyệt vời thks...z
Wondetful... vvvveererrrrryyyy skill...thks...z🦄🦄🦄🦄

[@plywoodworking]

Thank you, hope can give inspired

[@yoymao9784]

Inspired . .. 意味 は何ですか
My englizh not good
I will check dictionary hhhhhiiiiii

[@plywoodworking]

Glad can give inspired,no problem i not fluent on english too

[@restyfernandez1877]

Very nice

[@plywoodworking]

Thanks

[@chriswhite4596]

Very Nice 👍🏻 !!!!!!

[@plywoodworking]

Thank you

[@runsunpan6505]

Leaned something about the use of toggle clamp. Thx.

[@plywoodworking]

your welcome

[@zengafreezelight]

Es GENIAL. Solo dudo un poco, en el MDF, que se deforma con humedad, segun como quede apoyado, etc. Quizas sumando rigidez con alguna planchuela de aluminio.... x ej, la U de guía superior.

[@plywoodworking]

yes you right i use MDF before i found HMR but now all project i use HMR coz more durable, flat, solid and water resistant

[@mr.fazedor9793]

Very good.

[@plywoodworking]

Thank you

[@guyboulay9900]

Très intéressant, je ne connaissais pas ce système.

[@plywoodworking]

thank you hope this video can give inspired

[@reaper060670]

Alri bro.. What's the best wood for te top of the table saw?? What wood is twbbest to use I mean??

[@PRmeckanic]

You are so good at what you do , you make me want buy metric measuring instrument to avoid converting to imperial measurements.

[@plywoodworking]

thank you very much !!, i more familier use metric than inches coz all machine on my country use metric

[@PRmeckanic]

plywoodworking Americans are known to be rebellious... Hole world is metric.. I just have to adapt. Big fan and subscriber of your channel as a newbie to wood working.

[@plywoodworking]

@@PRmeckanic yes almost all use metric, american love use inches, i ty use inches but confuse, for me metric more detail coz use milimeter and i more familier with that measure. thank you for all support hope can give inspired!

[@Maniwasaki]

When cutting plywood, score it before you cut. Less splinters

[@plywoodworking]

my blade on that video not sharpen so look mess

[@darrellrichards2133]

Nice

[@plywoodworking]

Thank you

[@user-ye3jt7hv4p]

Another great idea! Thank you, my friend, for sharing your innovative ideas that save us money and time. Stay safe and please keep the ideas coming 🙏 ❤😊.

[@plywoodworking]

thank you very much!! sorry for late reply

[@user-ye3jt7hv4p]

There is no need to apologize, I know you are very busy. Thanks again ​@plywoodworking

[@plywoodworking]

Thank you for understand🙏🙏

[@mangkanor1261]

Ilokano ka gayam kabsat!

[@plywoodworking]

thank you very much

[@OlegMahony]

🔥🔥🔥

[@plywoodworking]

thank you

[@jdkman79]

Excellent video my friend. New sub.

[@plywoodworking]

thank you

[@stevemiller2957]

What size are the toggle clamps used and where did you buy them . Thank you

[@plywoodworking]

That mini toggle clamp i buy on ali express, try search with mini toggle clamp vertical

[@olachus]

You need either to resharpen your saw blade or to buy yourself a new one. The blade that you are using here is messing up the plywood. I recommend using a 60T or 80T, thin kerf blade for materials like MDF or plywood. Just don't rush it through the material when you cut. You'll be surprized!
Keep up the good work!

[@plywoodworking]

Yes 100% right, coz so many cut aluminium my blade need resharpen again, this multi material blade.
I have 60T blade but sometime i lazy change that😁.
Thank you for reminder👍

[@escalaty]

Muy buen video amigo, una pregunta; con que software haces las presentaciones??

[@plywoodworking]

thank you, i made with 3 sofware for make all video adobe premier, aftereffect and 3D max

[@zhelfidwisyah2646]

Keren pk de

[@plywoodworking]

siap om

[@samspade4634]

I love your videos and your work. You are an Artist Engineer and I can't get enough of your videos I enjoy them so much. Where can I find the plans for this? I do not have face book or Instagram so this might be my problem. Thank you for your help. I am subscribed and bell notification. Thanks again.

[@plywoodworking]

Thank you very much!👍😊👍

[@Bespe4nyi777]

Нормальная рейка получилась,минимум сотка баксов в магазе

[@plywoodworking]

thank you

[@nrako]

Love your nails

[@plywoodworking]

😂

[@worxop7589]

A suggestion is to use wedges to fasten the rail, its an old and cheap carpenter fastening technique.

[@plywoodworking]

thank you

[@yodesoeyade4257]

Pertamax...🍒😎😄🥝📣📣

[@plywoodworking]

makasih banyak mas smoga bermanfaat

[@oguzozturk6855]

i like your nails they are amazing

[@plywoodworking]

😁 i lazy cut my nails in last year ago

[@Serega_Siniy]

Супер, красавцы!!!👍👍👍🥰
Как масло называется и зажимы где купить такие?

[@plywoodworking]

Thank you, hope can give inspired