Pimp my pond! Formal pond re design & construction part #1: ‘The hard part’
Vložit
- čas přidán 23. 06. 2023
- Ed & Dave re-unite for a large formal pond re-line-re-design & construction commission. Unforeseen groundwork ensues & progress is much slower then expected! At least the weather was kind….watch on to see this pond build unfold!
- Jak na to + styl
Ideas coming for my ponds thanks - singing pond guys
Beautiful Pond Edward!! Peroni Friday’s just aren’t the same without you, now I have to drink both beers while enjoying my pond 😂😂
I had my suspicions you had a drinking problem…..😂😘
🫢 I hope you don’t talk about all your clients in this manner Edward! 🤣
Please post part 2 asap!!! Really keen to see how this one turns out. Also how you deal with all those sticklebacks!!! Thank you so much for your informative videos 😊.
Thanks for watching and your comment- part two is in the editing process and will be out in a week or two!
Best,
Ed
We love your videos, the gf is binge watching them all 😊
Maybe Dave should have his own Diet Coke break for the older generations?? Keep up the great work, probably the best and most informative uk pond channel.
Ha ha! Thanks very much-and thanks to the GF for binge watching!! I’ve passed on your comments to Dave- his response probably isn’t acceptable to write in the comments section😆 but I’ll get him to do something similar in the future I’m sure!
Cheers,
Ed
Thank you Ed, really enjoyed that, I will be nipping over to watch part 2 shortly. Your knowledge of aqua things is mind boggling.
😁thanks for watching and your kind words!
Hope you enjoy part two!
Best,
Ed
You take on some jobs great video again nice yo see someone who loves doing his job 😊
Thanks Mark! As always thank you very much for watching and commenting!
Best,
Ed
As always brilliant video wow some hurdles on the start some patience 👏
Thank you- yes, a few unforeseen obstacles on this one!
Thanks for watching and your comment,
Best,
Ed
glad to see that pondovac 5 getting a good workout 😂
Couldn’t do my day to day job without it-fantastic piece if kit!
Best,
Ed
41:30 i am a big lateral thinker & no particular expertise in this exact field…BUT why not have STARTED with trenching a 10 foot deep sump system at strategic location up stream of water table??? Then there would be NO water under good liner before you cut it…then clear for mini excavator and starting over without ground water issue!!
I do enjoy your videos and effort + quality…just sharing a big thought
Hi there, thanks for watching and commenting! In principle your idea is correct- had we been aware of any potential water issues this would have been looked at and dealt with before getting into the nitty gritty of the pond build- however hindsight is a fine thing- in this instance neither myself or the owners were aware of this issue until we’d thoroughly committed ourself with starting the build. Additionally the water issue wasn’t a water table/groundwater problem and was simply dealing with an underground drainage pipe that was directing a large (larger then i’d have liked in any case) amount of water directly to the pond and as such required re-routing.
Thanks for watching and commenting!
Best,
Ed
Fantastic job guys, can’t wait to see the finished pond! Puts my 6x4 pond to shame lol
Ah thanks very much!
Best,
Ed
Watching you from the states very informative great work
Hello to you across the pond! 👋!
Thanks for watching and your comment!
Best,
Ed
great vid really enjoy your work, shame your not closer, our pound is finished but would love to have hired you for a day to come trouble shoot its few problems.
Thanks for watching and your kind words. If I can be of assistance remotely don’t hesitate to get in touch!
Best,
Ed
@@CrystalClearAquatics thanks I might drop you a line with some info on our pond and situation. Maybe pay for a vid call consultation?
Your subs are at 9.99K . I subbed. I wasn't #10K.
I tapped the thumbs up 👍 button to feed the algorithm monsters.
Am 8 subs away!! Thanks very much Francus!
Best,
Ed
That was ace dave is such a hard worker! 42:40 😂😂 can't wait to see the next video finishing it!
Cheers Thomas, part two coming soon!
Best.
Ed
So excited for part two!
Thanks! Coming very soon😉
Best,
Ed
Wow; enormous amount of work but very satisfying to watch!
Thanks so much- I very much enjoy this sort of work!
Thanks for watching and commenting!
Best,
Ed
Hi Ed, You guys certainly take on some jobs, how the hell you work out a reasonable accurate costing with all the hidden pitfalls, this job must have been a nightmare. If your clients are genuine people they can see the masses of extra work that the drainage problems that you have had to contend with. Surely they cant expect you to complete all that extra based on your original quote or estimate ?.. cant wait to see part two
Hi Norman, thanks for watching and your comment. For sure estimating jobs like this can be very difficult to get any level of accuracy-I always stipulate on all my estimates that pricing is subject to ground conditions- you never know what you’re going to expose when digging and what could then be involved in rectifying any potential issues, increasing the work load massively as a result-like this job! In this instance once it became obvious there was an issue with water and the pipes were exposed and it was evident any re-routing of pipe within the pond couldn’t be feasible joined back to the existing pipework I had to present my clients with two options: I could maintain a dry enough environment via my temporary sump and pump to continue the build and once the pond was filled the ground water was less likely to cause any issues, so I would then put everything back to how I found it. Option two was to re-route everything entirely-my preferred choice and the right thing to do. My clients were very understanding and happy with the extra expenses I then had to estimate for and were happy for me to do the work. From my stance I was much happier to do the extra work in the knowledge that I was safe guarding ‘my pond’ from any potential harm in the future! Every job I treat as my own pond-I’d be heart broken to know someone was having a major issue with one of my builds! And yes- my clients have been wonderful throughout, looking after Dave and I very well!
Thanks for watching and for your comment,
Best,
Ed
@@CrystalClearAquatics I should have known you would be aware of hidden pitfalls and have covered all options as you do in all your jobs well done Ed.
De casualidad descubri sus videos hoy, super entretenidos para ver ❤
10:38 the pond viewing / sitting area should have been 45 degrees from proximal pool line…if boundary constrained…it should have smaller footprint to accommodate.
Thanks for your comment- may I ask why however? I agree that there are some simply ‘rules’ or theories that go somewhat towards making something potentially better if these rules are followed, but something as subjective as this is really down to clients preference- not to mention in this instance the seating/paving area positioning in relation to the pond had already been governed before the pond restoration was started. Having spent plenty of time sitting and watching the pond from this location I think this seating area complements the pond and is in just the right place!
Best,
Ed
Interesting project and a nice site to work on. Really appreciate the care you guys take to remove and save as much as possible.
Thanks for your kind words!
Best,
Ed
Very nice work ! The structure work right before the liner went in looked really nice, a shame it had to be covered up. Where is that Wader fund ? Lol Once you get to 10K subscribers it will take off.
Agreed- always a shame to cover up hard work, but so much work often goes into the unseen groundwork of jobs like this. Laying the block work-although hidden-does make the shallow marginal zones all the better so was well worth doing.
As for the wader fund: I now have a ‘super thanks’ tab at the bottom of all my videos-sort of a digital tips jar. I shall call this my wader fund….😉
Thanks for watching and your comment,
Best,
Ed
Brill as always. Good to see you both. Great to have the detail on levels, water seepage and measurements. Lots of food for thought there for my pond project. Looking forward to next time:)
Hi Jane! Thanks for your comment and for watching, hope your pond is thriving!
Best,
Ed
Great viewing. Such an informative video, great work guys.
Thanks very much for watching and your comment!
Best,
Ed
Wow, very impressive! Well described and clearly a man of great pond making experience. I just wonder if constructing and finishing a pond on a small site brings with it more problems related to building around existing features, drainage and housing of equipment. This site is enormous compare to my garden. BTW - cant wait to see the follow on video to this.
Hi there, thanks for watching and for your comment! In my experience, apart from the difficulties involved in housing my equipment-holding tanks etc- working in smaller gardens poses no greater difficulties then larger ones. In this particular garden there’s a lot of diy drainage that’s been very poorly installed at some point in the past-I’ve never encountered so many different pipes in any of my previous excavations in years and years of digging!! Just bad luck with this one!
Best,
Ed
Amazing job as ever!
Thanks James!
Best,
Ed
super impressed, overcoming some major issues, love the channel keep it up
Thank you sir! And thanks for watching and your comment!
Best,
Ed
You gotta love the poddington peas song 😂
An old classic for sure!!
Best,
Ed
7:36 understand the challenge, why not have final bucket lift and lightly tapered flow tray with water and solids separator base on gravity and diversion attendant? Would cost 250 pounds to create
Hi there, thanks for your comment and for watching- an interesting idea, but although technically feasible (I’ve worked on many a fish farm where fish were graded in size using mechanical methods) I really wouldn’t ever see the need to go to all the effort of making such a device to help in removing large quantities of small fish- in this example the stickle backs. Not to mention that such methods really aren’t as kind to the fish as gentle manual removal once the pond has been emptied.
Best,
Ed
Hi ed why don t you connect the drainage pipe to run in pond and then fit in a over flow pipe the other end so yo don.t get any water under liner just an idea
Hi Mark, great idea but two reasons why I didn’t (and couldn’t) do as you’ve said:
1) with no idea where this water has come from potential contaminants are a concern and so adding this water to a pond with livestock could be an issue.
2) due to the level of the drainage pipe against the pond, running water into it isn’t possible via gravity, which is why the trenching had to be carried out to the lower section of the garden where it was possible to discharge the water. Once the lower pond has been completed I shall be doing exactly what you’ve said -water draining into the lower pond and an overflow to take the excess water away! As this pond will be a natural wildlife pond I don’t have the same concerns about potential contamination.
Thanks for your comment,
Best,
Ed
@@CrystalClearAquatics oh I thought it was rain water ed sorry like you said you don.t no where it's coming from 🙏
LOL - I'll put a description in the link below 😀😀
😬😬😬is that what I said?!🤦♂️😂
Thanks!
Tony thank you VERY VERY much for that-really kind and no doubt I’ll be purchasing a new pair of waders soon😂
@@CrystalClearAquatics It might be worth mentioning to the viewers that we should chip in and help with the purchase of a new pair or two of waders. Well it's not much but I will donate here and there, it's a small price to pay for a quality program ! I do enjoy your videos , I learn a great deal from you.
how do you work with plastic on a stream? i.e if i create a 50m long stream into a pond, how do i overlap the plastic? is is stuck down with glue?
Hi there, great question! For a stream or a cascade with minimal fall/slope then the preference would be to use once piece of liner, with no joins. If this is not possible then the liner must be glued/joined with a suitable liner welding product.
However for most cascades or streams with occasional drops and falls then overlapping sections of liner without glue or bonding is absolutely fine. If you imagine turning a stair case into a waterfall and you used two sections of liner- starting from the bottom/lowest section of falls (bottoms step up) lay a section of pond liner. To overlap the next section of liner ensure that the lower section of liner (which will be under the next/upper section) is finished on the flat section of one of the steps and the overlapped piece of liner extends down to the flat section of next step below. That way water will continue to flow down the falls without leaking and without need to bond the liner. Hope that makes sense!
Best,
Ed
You can 3'4'5 to get square,
Very true and for larger square/rectangular ponds requiring perfect 90degree corners this method would be probably more reliable then using the speed square I was using- something I’ll prob cover in a future square build i’m sure! Thanks for sharing though!
Best,
Ed
Did you use a water meter and check the gallonage?
HI there, thanks for your comment and my apologies for the very slow response! No, a water meter wasn’t used during the fill process- however an accurate estimated volume is easily achievable in a such a formal uniform pond. Also I’m aware of the volume of all of my storage tanks and so this will provide a very good idea of pond volume for me when I’m draining water back into the pond using these tanks.
Thanks for watching!
Best,
Ed
30:29 i am thinking you should have brought in mini excavator and started over.
Sometimes I feel the same way, but where would the fun (and exercise) be in that?!💪😉
thanks for watching and commenting!
best,
Ed
How did you get into excavating ponds ?
Long story-one day I’ll post a video answering such questions- but essentially I’ve always been obsessed with wildlife, horticulture and especially aquatics in general! Went on to spend almost 20 years working in various water garden and tropical fish shops and it all went from there. I’m very fortunate to be doing a job I really enjoy!
Thanks for watching and your comment,
Best,
Ed
Coner's Drag Farm
Eh?!!!
Blablablablubla😮😮😮
Having re watched it recently I’d have to agree😂
Wader fund
🥳🥳🥳❤️THANK YOU SO MUCH! You sir shall get a special mention on the next video!
Best,
Ed
Hey ed when talking and pointing at something instead of having the camera focused on you how about focusing on the thing that you are talking about also can you have the camera closer to the work you are doing so we can actually see what it is you are working on in one of your videos you showed us a lily flower bud but we didn’t see it because you were so far away from it learn to zoom in on things so that we all get a look at what you are talking about
Thanks for the constructive criticism-will pass this on to my camera man😉 in all seriousness thank you for saying so and I agree with your points-often filming solo with nothing but a tripod has its limitations but there’s always room for improvement!
Thank you for watching and commenting,
Best,
Ed
No problem everyone needs pointers and criticism it’s the only way to learn
show more what is done and do the explaining in a voice over
Thanks for watching and commenting- will take your advice onboard!
Best,
Ed
Ed at the end talking to us subscribers you mentioned us e mailing you, desperately want help with advice on my pump if i only had your e mail address
Hi there! Simply google me (Crystal clear aquatics) and you’ll see my website with contact details. Depending on what help you’re after it might be the sort of advice I would charge for however…
Feel free to get in touch.
Best,
Ed
Good lord you talk too much
…you’re not the first to say so…😂 thanks for watching and commenting in any case!
Best,
Ed
@@CrystalClearAquatics you make great content though, kudos