99 Mustang Gets Kenne Bell Supercharger - Safe, Reliable BOOST!
Vložit
- čas přidán 23. 01. 2023
- In this video, a customer's 2V 1999 Mustang receives a Kenne Bell Supercharger! This kit is emissions legal and will make 9 pounds of boost with the standard pulley. Watch along for a quick overview of the kit as well as a short test drive showing the drivability of the car with the supercharger installed. Contact us below for any information on installing a Kenne Bell on your car!
________________________________________________________________
If you enjoyed the video, please like and subscribe as it helps us out a ton! If you wish to be notified when I upload a new video, click the bell icon next to the subscribe button!
Shop Facebook page: / savageperformanceky
Shop Website: savageperformanceky.com
Shop Phone Number: (859) 817-0764
Follow the channel's/shop's Instagram page here: / savageperformanceky
Thanks to my vehicle sponsor:
Nitrous Express and Snow Performance - www.nitrousexpress.com/ - Use code "savage" at checkout for FREE shipping on any order!
Also, shoutout to these companies just for being awesome:
UPR Products - www.uprproducts.com/
Tin Soldier Racecars - tinsoldierracecars.com
SPEC Clutch - www.specclutch.com/ - Auta a dopravní prostředky
Thank you for going over the hoses, currently putting on my intercooler for the kit and I was confused which hoses went where.
Just installed the same kit on my 02. Car is so much more fun to drive. Plenty of power now
Have you dyno’d it or gone to the track?
Great video and learned a lot from it! Thanks for sharing and u gained a new subscriber for sure!
Great build once again guys.
Thanks!
Awesome video!!!
I just picked up a used 04 GT with this kit. This video was VERY informative! Being as my car was from a widow there was almost no information with it. Thanks!!!
ik damn well u got a steal on the car
11k, 36k miles = ) @@juanmazon4746
@@juanmazon4746 10K!
Cool ride !!!
Thanks!
My 02 GT with Trick Flow heads and a 2.1 inercooled KB put down 410 rwhp and 408 rwtq, only 8 psi.. I am very pleased with 3.90 gears w/ this set up. It pulls all the through 5 gear and cruises 75 mph at 1800 rpm. Of course a smaller pulley 14 to 15 psi and longtubes are coming. Cant wait..
Probably still lose to a stock 03 cobra
Doing the same thing to my 01 cobra hoping to get around 400 to the wheels
Very cool
Thanks!
Did you end up doing any kind of tuning after the install? Great build!
Love your videos can you put that kit on crownvic 2008
Sure can
So you can’t use stock fuel lines on it even if you use the 1.7l supercharger
What's the ballpark cost on that build ya'all did? Thanks in advance
I have the 2.6 KB on my 2010 GT 4.6 and absolutely love the blower! I like the channel guys!! I'm in need of forged internals and smaller pulley. Maybe you guys can help me out?
Give us a call!
Can I put That Kenny bell on my 2010 Lincoln town car.
Can I put a kenne bell on my p71 interceptor
Kenne Bell means top quality
Will this work on my automatic new edge?
can this work on automatic mustang
Hey man awesome build I’m doing the same exact kit with on my 01 gt it’s automatic as well 9lb boost! But I’ve done the Eibach pro suspension kit with bilstein shocks and struts! I got 315/35 rear nitto nt555 tires so I believe that should help with traction! But the shop that’s installing my kb said I don’t need the boost and Air/fuel band ratio gauges right away, would you agree?
You don't need them, per se, but it's always good to know your AFR if you know how to read them. Seeing the boost on a boost gauge is also pretty cool and good to see.
@@SavageProductionsCarsright on thank you for answering, I also have frpp 3.73s, new 31spline trac lok rear end, Kenny brown extreme matrix kit and a new fuel pump and filter!
What's the cost of this build?
We have a power pipe for those ;)
Missed opportunity! He'll be coming back. Maybe we can do some convincing. Haha
Where can a fella find this kit? I have a 2000 GT that I just bought a few months ago, I’m currently doing a complete suspension rebuild and handling maintenance on it but I’m looking for ways to make more power down the line
You can purchase it from us and we can drop ship it! Our contact info is in the video description.
This is an awesome build guys, with so much torque on tap from the Kenne Bell blower, do you think the 3.27 gears would be best instead of 3.73 gears? Do you think that the owner would have problems with traction if he upgrades to the 3.73 gears, because I would love to do the same setup to my 2006 Crown Victoria Police Interceptor and I also have 3.27 gears.
The car needs some suspension, but mainly a good tire with how much power it makes. A good tire, suspension, and 3.73 gears will make for a better combination for traction than his current setup with the 3.27s. We told him he shouldn't do gears without a tire, cuz as you said, traction will be even more of an issue.
@@SavageProductionsCars okay that's some great information, so with a 3.73 gear what size tire would you guys recommend far as width and height?
@@krownvikkhris3004 I'd do some research about your specific car, but generally speaking, a 275 radial on a 15" wheel is the go-to. I think some guys run a 305/45 R18 on theirs.
@@SavageProductionsCars okay because currently I have 235 55 17 on my car now, which is a 27 inch tire
305 or 315/35/18 would be great
Boosted 99
That’s gotta be the smallest kenne
Where is your shop located?? How much is an install like this??
Hebron, KY, just south of Cincinnati, OH.
Would 4.10 gears be to much for this setup?
Not at the safer boost levels here, no
Too much for a boosted 2v. 3.73 would be better
@Garsnow this is horse shit. I run 4.10 on a 740/730 rwhp/rwtq 07 gt500 with a 2650 tvs. I will admit I have trouble getting 100% traction in 2nd with 325 et street r 15s and I may go taller on gears but I'm going to built suspension first see if that helps. At a low boost 2v power level 4.10 will be fine the 4.10 worked awesome with drag radials on the stock blower it was bolt ons had 550 rwhp. Gt500 is heavier but also had good bit more power than a low boost 2v. A stock motor 2v be fine with 4.10 just gonna need drag radials. And yes I mean with boost.
@@Adam_S281 def not especially being a auto car. 4r70w has a wide ratio
How long will it last . Better prepped that bottom end . If not it will go boom in time
It's on low boost and should survive a very long time.
@@SavageProductionsCarsit will it’s a 4.6 gotta be more worried about the trans
Will this kit work with my stock 99 cobra?
Of course!
@@SavageProductionsCars I went to your link in description to see about getting a supercharger for my 4v 1999 cobra
@ag3116 the best way to reach us is via phone call or Facebook message.
KB should sell the upgrade kit for your Cobra.