Video není dostupné.
Omlouváme se.

How To Build A Paper Tuning Rack At Home | Bowmar Bowhunting |

Sdílet
Vložit
  • čas přidán 17. 07. 2017
  • Follow us on INSTAGRAM! @bowmarbowhunting & @bowmar_archery
    Paper tuning your bow is so critical for long range accuracy, and field point accuracy out of your Broadheads. Never skip this step when getting your bow set up.
    TO ORDER A NOSE BUTTON GO TO WWW.BOWMARARCHERY.COM
    Complete Gear list on www.bowmarbowh...
    This Video Gear List:
    Bow: Hoyt Carbon Defiant 34 inch
    Arrow: Easton 300 spine axis
    Sight: Spot Hogg hog father
    Release: wise guy from Spot Hogg.
    #bowhunting #archery #hunting

Komentáře • 21

  • @wantutri7225
    @wantutri7225 Před 6 lety +7

    i just used a muck boots box because it's the biggest i could find and cut a 10x6 rectangle on the lid and put the box on a table that was high enough

  • @waynemiller7178
    @waynemiller7178 Před rokem +1

    The hacksaw blade can be removed and reattached to the handle on the 45 degree pins. That way the handle can be held offset at 45 degrees to avoid the pipe when cutting it in half lengthwise. No swapping sides and no wavy cut.

  • @davidfrette7721
    @davidfrette7721 Před 2 lety +1

    Love this design. If you have a power mitre saw you can get this done in a few minutes. I did not glue in the uprights to the base so that I can take it apart and store it tightly against the wall. Also, I used a bungee cord around the frame at the middle bar snd at the top to keep the paper taunt. May need to put a rubber window sealer strip on the middle bar so the bungee would press the paper tighter and keep it taunt. Also avoids having to do the linear cut on the middle bar. Anyway thanks for sharing the video. The set up is perfect

  • @Sparky513
    @Sparky513 Před rokem

    If your want it more stable, add water in the bottem pipes or even concrete in the pipes just the feet area of it. I just built mine last night. 2023 cost me 73$ with the pipe cutter tool, pipe, fittings and paper. Took me 15 min to build

  • @justinmahan7860
    @justinmahan7860 Před 6 měsíci

    How long was the bottom pipe running across the center

  • @russellbowman8051
    @russellbowman8051 Před 4 lety +1

    Very Creative!! NICE !! 👊

  • @dennyross4735
    @dennyross4735 Před 7 lety +1

    This reminds me of the shed/badger 10 point you shot last year. You'd made a really solid perfect shot on him hadn't he ducked it by like 6 inches.

  • @kevinanderson829
    @kevinanderson829 Před 2 lety

    Excellent job!!

  • @JDsSportsRoom
    @JDsSportsRoom Před 3 lety +2

    Glad u still have your fingers, 😅

  • @cameronedwards4808
    @cameronedwards4808 Před 7 lety

    Nice video keep up the good work 👍🏽👌🏽

  • @jamessonger3
    @jamessonger3 Před 7 lety +1

    What kinda paper was that? Where did u buy it?

  • @jayrhoades6082
    @jayrhoades6082 Před 5 lety

    I would just cut the pipe holding the paper tight totally in half and pinch the paper between the pipe and put it into the t

  • @outdoorlife049
    @outdoorlife049 Před 7 lety

    how do you get deer to come out later in the day if they are coming out at night/early morning

  • @yourgay4748
    @yourgay4748 Před 7 lety

    what is that

  • @jakenbarr1734
    @jakenbarr1734 Před 7 lety +1

    1