Epoxy Versus Polyurea Flooring (Which is Better?)
Vložit
- čas přidán 17. 08. 2024
- A concrete coating is an investment, and if you choose the wrong type of product for a concrete coating, you’re going to run into problems sooner than expected that are going to cost you extra time and money. So which is better a Polyurea coating or Epoxy? Well in this video we compare the two to see which one is right for YOU!
00:00 Intro
01:04 Durability
02:01 Longevity
02:33 Cost
03:21 Prep Work
04:20 Cure Time
05:17 Which is Better?
Video: "What Goes Into a Concrete Coating Installation?"
▶ • What Goes into a Concr...
▶Thank you for dropping by The Home Solutions Channel. And remember, it’s your home, your new concrete coating, and we want you to have the look you LOVE coming home too.
▶If you want more Home Solutions don’t forget to Subscribe to the channel and Like this video. You can also leave a comment below if you have any other questions. We’d love to hear from you.
▶Check out more great content at the Southwest Exteriors Learning Center
www.southweste...
I'm getting by patio and garage done with polyurethane. Watching this reassured I made the right choice. Thank you! 😊
So glad to hear it!
Enjoy your updated patio and garage!
I guess polyurethane and polyurea is different , please correct me if am wrong
That answers my question. I'm sticking with my concrete floor with sealer. It isn't as pretty but it has been good for 72 years and sealer helps with the cleanup and an occasional pressure wash. I had no idea that this paint was so expensive. Thanks for sharing.
Our Pleasure!
Thank you for checking out the video, and glad that it helped solidify your decision to go with a sealer on your concrete floor. If you have any other questions on a concrete coating don't hesitate to let us know.
Thankf for being honest.
It's our pleasure! We hope it helps. Let us know if you have any questions.
Great explanation of the two thanks
Thank you! Let us know if you have any questions about concrete coating.
nice work thank you I would like to know your advice regarding the two solutions in setting up a basement, where the danger of infiltration or flooding is major.
There aren't many products that work well after sitting in water. Your best bet would be a vinyl tile/plank or a porcelain/ceramic tile. A epoxy or polyurea coating is nice and can resist some water, however, it is at the bottom of the list of basement flooring types when it comes to water infiltration.
That list is:
1. Luxury Vinyl Plank (LVP) or Luxury Vinyl Tile (LVT)
2. Tile Flooring
3. Concrete Flooring
4. Rubber Flooring
5. Epoxy/Polyurea Flooring
6. Engineered Hardwood with Waterproof Core
Thank you for checking out the channel! If you have any other questions don't hesitate to let us know.
amazing thanks for the all the info i made my minds !
Glad to hear it!
Thank you for checking out the video
If I could, I'd give this video 10 thumbs up!! ☆
Thank you so much!! So glad you enjoyed
Which one is best for concert roof to safe roof from water seepage from rain?? Please replay?? And also what's best for concert cracks?
Thank you for your comment and checking out the video!
For protecting a concrete roof from water seepage due to rain, polyurea is generally the better option. Polyurea coatings are highly durable, flexible, and offer excellent waterproofing properties, making them ideal for areas exposed to the elements.
For concrete cracks, it's best to repair them first before applying any coating. You can use a concrete crack filler or sealant to fix the cracks. Once the cracks are repaired and the filler is cured, you can apply a polyurea coating over the surface for added protection and longevity.
I hope this helps! If you have any more questions, feel free to ask.
@@TheHomeSolutionsChannel thank you so much for the valuable information
@@peopleschoice1457 Our pleasure!
Hello. If the garage is from a new build as we are the first owners and garage has no wear at all, Is the diamond grinding still necessary?
Hey Taylor! Thanks for the question.
For a new garage floor, diamond grinding is still essential. It ensures the coating adheres properly by creating a rough texture which enhances the bond between the coating and the concrete. Removing contaminants that can affect adhesion. And opening concrete pores, allowing the coating to penetrate and bond more effectively, which is essential for the durability and longevity of the coating.
Skipping this step can lead to peeling or cracking.
I don't live in your service area, but I have a general question. At least I hope it's general enough that you can answer. I'm having a new concrete slab for in my garage in the middle of June. The contract calls for them to apply a cure sealant upon finishing the job. I'm quite capable of misting the new slab several times a day to promote slow and even curing. In this scenario would you, as an installer, prefer to have no cure sealant applied, or does it not really matter as you'd grind it in any case?
A cure sealant can be a good idea to assure that both the concrete hardness and moisture levels are optimal for a coating, as those are two of the main things we check to make sure the concrete is ready.
Any of the aesthetic properties of a curing sealant, would be grinded away when it came time to apply your coating so I wouldn't pay extra for a curing sealant that alters the appearance of the concrete.
For more information on concrete testing, check out this video below 👇
czcams.com/video/Xo7fzXCmD9U/video.html
Thank you for checking out the video! Let us know if you have any further questions or want more details on concrete curing.
What kind of prep work is needed for freshly poured concrete, as in brand new concrete? What about painting cinder block walls
With freshly poured concrete, for a Polyurea coating you need to wait 30 days to ensure that it has properly cured. Then the same hardness and moisture test that is used on older concrete would be completed. After that the concrete should be ready to go and the process for an installation would be the same as older concrete. The biggest thing is to try and give your new concrete that 30 days to cure.
For painting cinder block walls, you want to make sure to clean the concrete, seal the concrete, then get a high quality primer layered on, and finally painting the surface.
@@TheHomeSolutionsChannelWhat sealer and primer would you recommend for cinderblock walls?
How long does my concrete garage floor have to cure before a polyaspartic coating can be applied?
Thank you for checking out the video!
We recommend waiting 30 days for new concrete to cure. Then checking the moisture and hardness and be sure that it is ready for a polyaspartic coating. Depending on your areas conditions it could be a little less or longer, but 30 days tends to be the sweet spot. Just be sure to check the moisture and the hardness of the concrete before attempting a coating to be sure there will be no issues.
@@TheHomeSolutionsChannel thank you.
Hi there, great information!!! I want to cover about 700 sq. ft of my lower level (due to flooding issues). Which is the best material to avoid damage and molding after a flood? What is the preparation for this project? Who would you recommend completing this kind of project? Thank you for your tutelage; you
are an excellent Teacher.
Thank you so much for checking out the video! We are glad you found it helpful.
There are a lot of great options for a lower level flooring. A concrete coating is a great option for a basement if you are looking for a low maintenance option and they can handle many water issues.
A polyurea flooring is waterproof and can handle the occasional water issue, however, there is no guarantee any type of flooring can handle being in standing water for a prolonged period of time, such as a basement flood.
Another option that seems to be favored for basements and lower levels, is a Luxury Vinyl Tile because when installed correctly, it floats above the slab and with a moisture barrier underneath can help protect the tile from water.
If you were interested in a concrete coating, it would be best to talk to a professional about installing a coating in your basement because depending on the basement it could be tricky to install properly.
If you wanted to let us know the location you would be getting the work done, we can look for a recommendation for installers in your area.
I hope this answers your question. If not let us know!
hi sir, can i apply acrylic resin over epoxy, i used epoxy over roof concrete, so if i apply acrylic resin over epoxy which is uvstable
Thank you for checking out the video!
There seems to be mixed results out there when trying to apply acrylic over epoxy. That is not our specialty so, unfortunately, we don't have any professional opinions on the topic. However, there are several articles out there talking about the pros and cons of doing such a thing. See Below:
artradarjournal.com/2021/11/30/can-you-use-spray-paint-on-epoxy-resin/
artradarjournal.com/2021/12/01/can-i-use-acrylic-paint-over-epoxy/#:~:text=It%20is%20possible%20to%20mix,to%20color%20the%20epoxy%20well.
Most other sources we found said that it can not be done due to unwanted reactions between the materials causing the acrylic to bubble up or not adhere to the epoxy.
Hi. Is polyurea waterproof? Planning to use it for the roofdeck.
Polyurea can be a great choice for water proofing. For coating a roof deck, I would just make sure that you find a professional contractor experienced in coating and properly ensuring your roofdeck is sealed so you won't have any problems in the future. As the product for roofs is different than what you would use on your garage floor. You want to make sure that any cracks or issues that may exist are properly repaired before you trust the polyurea to protect your roof.
@@TheHomeSolutionsChannel Good advice. Thanks for the quick answer!
I have seen several professionals talk about an epoxy base finish and a polyurea top coat. I know you are a polyurea guy... but is using polyurea as a top coat give you that durability, heat resistance, UV stabilization and hardness that creates the value of using polyurea?
That's an interesting thought, thanks for bringing it up!
Applying a polyurea top coat would potentially give you the benefits that it provides. However, the real key to proper adhesion is the concrete preparation and making sure the moisture content is in the correct range AND using a grinder to ensure proper bonding.
This is not a practice we do because we want to know how the base coat was applied, because if the epoxy wasn't installed correctly and has any cracking or bubbling the top coat would eventually crack and bubble as well and could shorten the lifespan of the polyurea.
This absolutely could be an option and there are contractors out there that would do that for you, but as the client, you want to know how the base coat was applied to be sure you won't have any potential issues in the near future that might have you doing the job over again.
@@TheHomeSolutionsChannel my question is the same but it’s a new install where epoxy is put down after grinding and prep, then the ploy urea is applied within the proper time over the new epoxy.
Do you think it's good to use polyurea coating in Vinyl floors??
In our experience, polyurea is best used on concrete to ensure proper adhesion.
A polyurea coating on vinyl floors may alter the appearance and texture of the surface. The glossy finish of the coating can change the natural matte look of vinyl. Additionally, the coating may affect the flexibility of the flooring, which could lead to cracking or peeling over time.
It's also important to note that using a polyurea coating on vinyl floors may void the manufacturer's warranty. Manufacturers often have specific guidelines for maintenance and care, and applying a coating.
Ultimately, consulting with flooring experts or professionals who have experience with both vinyl floors and polyurea coatings could provide valuable insights and guidance tailored to your specific situation.
Hello. I would love to do this, but it just isn't in my budget right now. Would it be possible to use a DIY epoxy kit and seal it with a polyurea top coat? I have a 1 car garage that doesn't get hit with a lot of sunlight. Also, should I paint the garage walls first and then do the floors, or does it even matter? Please advise.
Yeah that all works, just know that a DIY kit might not last as long as a professional coating, but with that said your plan will still work just fine for your garage. I would probably paint the walls first just so I don't have to worry about dripping on the floor.
I live in a seismic active zone where earthquakes are frequent. So hypothetically if my whole house I coated with Polyurea then will it resist an earthquake?
Thank you for checking out the video!
Unfortunately, there is no coating that can combat a shifting foundation. A polyurea coating may hold together and hide small cracks that start due to foundational shifting, but at some point, when the foundation shifts bad enough the coating will give.
For more details check out this video talking about Concrete Problems a Coating Will Not Fix"
👉 czcams.com/video/q57ISvtTgQw/video.html
@@TheHomeSolutionsChannel Thank You for the information.
What would u recommend for restaurant kitchen floor over concrete?
We specialize in polyurea flooring and offer a lifetime warranty on the product, so that is always what we recommend, but either should work well for your purposes. With whichever product you go with the two big questions you want to ask your installer is about slip resistance and heat stability. Being in a kitchen you want to make sure the floor can handle the heat of a kitchen, and not cause any slip hazards.
Thank you for checking out the video!!
Why am I paying for the durability and longevity?, I should be paying for the material and the cost of producing it. Lets say tomorrow I discover mix of water and dirt that lasts forever but is costs $1 to produce 5000 gallons, should I charge a lot more because it lasts forever?????
Thank you so much for checking out the video!
Durability and Longevity are a huge factor when it comes to the cost of your concrete coating. Since each material has a different life expectancy you can look at your investment being more based on which is more important to you, cost or how long you will have the coating.
If you go with a coating that is less durable and have to redo it every few years you end up paying more in the long run. While investing in a coating that last's 15 plus years can give you peace of mind knowing that you won't have to worry about re-doing it.
A lot of the cost does come down to the material and cost of producing it, but the longevity follows right behind in importance. One of the great things about coating your concrete is there are so many options available, so you can select the one that works best for you and your goals for your project!
Feel free to check out a previous video we did where we talk about the 5 common coating times for concrete.
"What You Can Use for a Concrete Coating" Link here - czcams.com/video/dMgl7JcvYmE/video.html
Polyaspartic vs polyurea ...... which one is better.......?
That's a great question! Polyaspartic is basically a type of Polyurea that has been modified. So some polyaspartics may be more UV resistant, or modified to adhere to concrete better. Overall the two products are extremely similar, but Polyaspartic could be used if you have concrete that may be trickier to coat. We just added that question to our upcoming content list so make sure you keep an eye open for a video taking a deeper dive between the two!
@@TheHomeSolutionsChannel thank for sharing your knowledge with us .......
How long after a new concrete garage floor is poured can it be coated? If its dry enough to drill into it and install lifts will it be dry enough to coat it? AND will a "broom finish" be enough for the poly to stick properly and cure flat or does it need to be super smooth? Thanks.
Thank you for checking out the video! We like to wait at least 30 days prior to applying the product to a new concrete pour. If you can drill into it, however, it should be good to go. The type of finish on the existing concrete, broom in your case, would not matter for a professional polyurea install. Regardless of the type of finish a concrete has, a grinder should be used to properly profile the existing concrete. This ensures a level surface and consistency throughout. This will make the finished product look smooth and last much longer!
@@TheHomeSolutionsChannel thats what I'm getting at. This is a new pour and I can have any finish I want because it is fresh, it is not existing concrete. What I want is to know is how smooth a finish should it be for the coating to adhere properly. That way I can have the concrete guys finish it they way it needs to be. Why would I want to let it dry 30 days and then rent a grinder so that i can profile the floor? That's an extra expense and an extra step. Thanks for your help
Ahhh yes I understand. Let me talk to some installers and find out what kind of finish that would work well to lay down a polyurea flooring without needing to grind.
I spoke with our concrete project manager and he said that no matter what type of finish that the concrete has you will want to have it grinded smooth for proper adhesion of the polyurea and ensure a high quality installation that you will not have potential issues with in the near future. If you want to talk to someone in more detail make sure you check out Southwest Exteriors over on Facebook to chat with someone from our team.
I just received my tramex 5 moisture meter , it ranges from 0 to 6. Where on that range would be considered high to where you would put down a moisture barrier? Thanks
Thank you for checking out the video!
With our Tramex we consider anything under 5.5% good to go for coating. If it is higher than 5.5% we then look towards a moisture barrier. Here is another video where we go over all the tests for hardness and moisture to make sure your concrete surface is prepared for a coating.
czcams.com/video/Xo7fzXCmD9U/video.html
There is two kind of epoxy. The cheap one from the hard vare store and the is also a prof epoxy
100%
Would you expect more than 15 years in a basement application of Polyurea?
The manufacturer warranty is for 15 years on the Penntek product that we sell at Southwest Exteriors. That is for normal usage and traffic, with the assumption that heavy machinery is not going to be moving on it every day. The flooring holds up incredibly well in garages in South Texas where extremely hot tires are on it almost every single day. So, in a basement, if installed properly, I would venture to say that it would hold up for an incredibly long time. Hope that helps!
@@TheHomeSolutionsChannel How about the waterproof? I am about to install the vinyl floor down on the basement but the basement got water in from a burst pipe which makes me change my mind for a better solution now. What is your suggestion for waterproof flooring? Thank you
@@sherimorenbest1413 There are a lot of great options for basement flooring. A polyurea flooring is waterproof and can handle the occasional water issue, however, there is no guarantee any type of flooring could handle being in standing water for a prolonged period of time, such as a basement flood.
Another option that seems to be favored for basements, is a Luxury Vinyl Tile because when installed correctly, it floats above the slab and with a moisture barrier underneath can help protect the tile from water.
A concrete coating is a great option for a basement if you are looking for low maintenance and can handle the many water issues.
It would be best to talk to a professional about installing a coating in your basement because depending on the basement it could be tricky to install properly.
I hope this answers your question. If not let us know!
@@TheHomeSolutionsChannel Thank you
Would be nice to be able to read all of the reply
Which reply can you not see all of? There should be a read more button you can click on that should expand the reply for you to read everything, but I'd be happy to post a reply again if you would like.
Is polyurea better than polyaspartic ?
They actually work best if you use them together, that way you get the best of both worlds and the best coating for your concrete.
Here is an article talking about the features of each so you can see which one is best for you.
www.southwestexteriors.com/blog/polyaspartic-polyurea-concrete-coating-difference/
TY for checking out the channel!
Hi! so by reading the comments i have found that i definitely have to remove the epoxy that is chipping so badly! i have to clean the basement floors (where i live) all the time because of pet urine. i’ve used a much of random cleaners throughout the years which i just leaned that some citric cleaners are bad for epoxy (or maybe it’s just bad for the gloss part). over all i know it was a poorly done job by whomever did this to the floors because the epoxy is chipping away and bubbling and it is so hard to clean completely (lots of left over oils, grooves, lesions, etc etc) so i have to remove it 😭😭 i have to do this job and research myself so do you have any advice for me? Again, this is my living area and the chipping, bubbling, dull but oily from trying to clean IS SO DEPRESSING. I just want to be able to clean the floors like that are water proof 🙏🏼 the dogs are hard on me lol so remove epoxy completely because we need REAL adhesion and then re do it with whatever it is that ur talking about on this video etc etc. (Sorry I haven’t got to that research yet, I just read in one of your comments to someone else that it’s basically recommended to remove the bad eproxy based on other articles that you’ve read bc adhesion and such)
any advice or would be appreciated since I have no one to help me, mostly. i’m not sure if you’re allowed to share emails on here but it would be cool if we can connect or comments on here would work just fine as well!!! thanks so much! I’m looking forward to binging all your videos and to making my basement into a comfortable living area lol it’s a DRAG
Thank you for checking out the video!
Our suggestion is to reach out to a Penntek dealer in your area, you can find one using this link, www.penntekcoatings.com/locator/
Then you will have a specialist in your area who deals with Polyurea floors to give you the best direction. If you are in the San Antonio area, feel free to give Southwest Exteriors a call and we'd be happy to help you and answer any questions you may have.
So glad you are enjoying the content, and if there is anything else we can do for you don't hesitate to let us know.
Thanks for checking out this video! If you have any questions, don't hesitate to leave them down here in the comments, we'd LOOOOOOVE to hear from you!
Which one cost more? 😁
Both epoxy and polyurea can vary in price depending on the brand, quality, and the specific project requirements. Generally, epoxy coatings tend to be more affordable compared to polyurea. However, it's essential to consider that polyurea offers some distinct advantages such as faster curing times, increased durability, and better resistance to chemicals and UV rays. These factors may justify the higher cost of polyurea in certain cases. Ultimately, it's recommended to consult with professionals or contractors who specialize in concrete coatings to get accurate cost estimates based on your specific project needs. Hope this helps and THANKS for checking out the video!