Continuation. To help you all out i had to make this video. Because some of u would run to dealer. It takes about 1hr 40 mins to complete. But I did, so can u.
Thanks man. About to replace my knock sensor myself today because of your video. Waited for a local dude to quote me but he was to busy so wish me luck. Plan on dragging my best buddy and my brother with me. Lmao.
Can you make a video on bank 2 knock sensor? Apparently that’s what’s throwing a code on mine according to my mechanic. But I see nothing on the other knock sensor.
My car kicks the gears hard and sometimes it doesn't want to back up the gears I stop at a light and it stays in the fifth gear I have to turn it off to get it to go back to the first gear from park to reverse It also hits the transmission hard.
The 5th gear is a limp mode. Replace the crank, bank 1 cam, and bank 2 cam position sensors (only use OEM, cheap ones don’t work). Replace one at a time if you want to see which one fixes it.
What was wrong with your knock sensor? Mine, I have the code p0328 on and the car won't go pass 40 mph (limp mode). Any idea, what's wrong with my car? Thanks!!
@@CharlesWilson-oz8ys bro, you are quick on replying! I appreciate for that!! It all happened when my car stalled on freeway. After it stalled, the starter went out, so I replaced it. And so it would start, but it won't go pass 40mph. Driving around here on the block seems to be fine, no stalling or idling issues it just stay on limp mode. Also, no engine lights on but scanner with oem enhanced detected p0328. Any idea to help a fellow out? Much appreciated!!!
@@williamapple6538 sure. A p0328 will mean one or two things, your knock sensor is gone or the wire that plugs into it. This video has a part one. If u follow the details you will do it yourself. I mentioned the tools needed, and if u get stuck btw just lemme know. But first get u a knock sensor and the start watching this video from part one. The problem u have is the knock sensor and our engines don't like knocking sounds
Thanks man. About to replace my knock sensor myself today because of your video. Waited for a local dude to quote me but he was to busy so wish me luck. Plan on dragging my best buddy and my brother with me. Lmao.
Thanks bro
Great video thanks man
Great detail. THANKS
Great detailed video..Thanks
Very good video. Thanks
Hi ? Do u have to do a ecu relearn after replacing knock sensor and can I put neg & pos battery cable together to drain ecu to relearn
hi man is this the same 3.5 v6 engine you get in the 2004 murano?
Is there a certain way to put the knock sensor back on
Thanks bro u just save me $500
Glad I could help I know the trouble
How many knock sensor on the 08 Nissan Maxima
Due remember to cover the intake ports with a shop rag, save yourself extra work.
Can you make a video on bank 2 knock sensor? Apparently that’s what’s throwing a code on mine according to my mechanic. But I see nothing on the other knock sensor.
I no longer own this car I donated it to charity. I moved to SRT charger
My car kicks the gears hard and sometimes it doesn't want to back up the gears I stop at a light and it stays in the fifth gear I have to turn it off to get it to go back to the first gear from park to reverse It also hits the transmission hard.
The 5th gear is a limp mode. Replace the crank, bank 1 cam, and bank 2 cam position sensors (only use OEM, cheap ones don’t work). Replace one at a time if you want to see which one fixes it.
nice video, my car is drowning codes for # and # 2. knock. sensors, do you know anything about the second one?
What's your year make and model
I just asked the same question. Lol
What was wrong with your knock sensor? Mine, I have the code p0328 on and the car won't go pass 40 mph (limp mode). Any idea, what's wrong with my car? Thanks!!
What is your year make and model
@@CharlesWilson-oz8ys 05 maxima
@@williamapple6538 gotcha so u say it's stalling during take off? Or idle
@@CharlesWilson-oz8ys bro, you are quick on replying! I appreciate for that!! It all happened when my car stalled on freeway. After it stalled, the starter went out, so I replaced it. And so it would start, but it won't go pass 40mph. Driving around here on the block seems to be fine, no stalling or idling issues it just stay on limp mode.
Also, no engine lights on but scanner with oem enhanced detected p0328. Any idea to help a fellow out?
Much appreciated!!!
@@williamapple6538 sure. A p0328 will mean one or two things, your knock sensor is gone or the wire that plugs into it. This video has a part one. If u follow the details you will do it yourself. I mentioned the tools needed, and if u get stuck btw just lemme know. But first get u a knock sensor and the start watching this video from part one. The problem u have is the knock sensor and our engines don't like knocking sounds
I think this is bank 2
I love Nissan’s but I’m a Sentra woman!!! Sorry not sorry lol
My bad i keep saying shock absorber loll I was still a bit drunk from last night
Charles Wilson lmao I understood tho 😹
@@goodgirl9461 lol I need to be a good boy
Charles Wilson there won’t be any fun n being good lol but if I wanted to be bad while working on that car with you! Could you hold your composure?
@@goodgirl9461 of course lol I'm always a gentleman
Charles Wilson where you from?
All these V6 engines are an expensive money pit to work on regardless of the brand. 4 bangers are much easier and less labor.