How The HyperGo 10208 SHOULD HAVE Been Made (Almost)
VloĆŸit
- Äas pĆidĂĄn 2. 07. 2024
- đWIN an RC Car: raffall.com/derbycityrc
â Recent update: You can now buy the âUpdated Verison 1 car here: shop.makerfire.com/collection...
This should have certain improvements but i have one in route that I will be reviewing soon. Also, there is still supposed to be an even more updated âversion 2â in the coming months (probably atleast 4 months), but not yet sure what improvements that model will have.
Here is a discount code IF you want to go ahead and order this enhanced version 1:
đ°Discount code: DerbyCityRC
-Initial Review (This review is possibly obsolete since we may be getting an updated version soon): A More Affordable Alternative RC Car? - MJX Hyper Go 10208
âą A More Affordable Alte...
-Favorite RC Car under $200: amzn.to/3MX09Ta
-Car review video to support my opinion about said car: âą New HBX 2997a - The RC...
-Favorite RC car under $500: bit.ly/derbycityrc
Video to support my opinion: âą Arrma Outcast 4S NEW V...
-My most fun speed project so far: âą Making a Scary Wobbly ...
đShirts & Stuff: https: //dertymerch.creator-spring.com
-Adjustable Ramp: www.kc-rc.com/collections/bas...
-Ramp Build Tutorial: âą How to BUILD RC CAR RA...
đFavorite Lipo Charger: www.banggood.com/custlink/m3K...
đ ïžAwesome Hand Tools: naughtyboyrc.com/derbycity
đ°Discount code: derbycity5
-TikTok: www.tiktok.com/@derby.city.rc... - ZĂĄbava
dude I am living vicariously through you in this hobby lol a shop full of RCs is definitely my dream
Nice! Youâll get there!! đđ
Thank you for the update on the truck. I canceled my order because they do need wider arms to make this better.
Youâre welcome and I agree! I highly doubt this next one will have wider arms, but hopefullyâŠthe next-next one supposedly due out in a few months will!
Really enjoy the Frankenstein videos. Itâs not a bad little truck but I definitely agree on making it a bit wider
Yup đŻ!! Thanks!
I preordered this after I watched your first video and they emailed me yesterday that I will be getting a revised version 1. So V1.5 I guess? Including tighter shell to prevent clipless body from popping off, adjusted diff screw glue, reinforced chassis, and fine tuning the parts that wiggle with excessive play. Should be available in July. Then V2 will be available in October. They gave me the option to accept V1.5 or wait for V2.
Oh cool thatâs awesome!!
Iâm inclined to say wait for the v2 but as far as I know we donât know what that version will consist of. Hopefully many more things that weâve all mentioned in the videos.
Hahaha I commented this before the end of your video. Silly me.đ€Ł
lol all good!! Where did you pre order? The one I preordered didnât give me an option but it supposedly shipped yesterday lol and of course itâs cheaper now!
Makerfire is where I ordered.
@@snuzum06 cool! Ya I was hoping to cancel mine yesterday and order from them but I got the âshippedâ notification from hypergorccars.com too late. Makerfire does seem like one of the best places to order this from.
Hope MJX takes your input in to consideration for a V2/3. Great video as always.
Mine and others for sure! Heck at this rate we might have a V7 by winter đ
Thanks!
It's interesting to see all the changes you made and how the truck improved. Good work. I think the fact the radio was so bad is one of the most surprising things about it. It will be interesting to see how much the next version changes.
Ya that radio is terrible. Lol. Hopefully that and the other mentions will be included in one of the next versions.
Thanks!
Loving the regular uploads and all these "how to make it better" videos. Easily become one of my favourite RC channels, full of info and breakdown advice and tips as we go. Well done and keep 'em coming, you're doing great. (More Plushy-alien in there as pls, as random cameos please. Makes me laugh everytime he pops up).
Thanks! đ Mr Alien Bro certainly hasnât left. I never really know where he ventures off to. He just shows up unannounced at the worst times! đđœ
love your videos dude. probably my favorite rc content creator. you have so much charisma, and your videomaking end editing skills are on point. :D I bought an xs flux, since it's only what would be 231 dollars in my country, so I jumped on it, and loving it so far. :D
Dude I appreciate that so much!! Awesome deal on that flux! Nice!!!
This is still a nice truck. Hopefully the new one will be beast mode. Awesome video as usual
I agree. Hopefully!!! Thanks!!!
Excellent video as always man. The effort you put out to make these cars and videos awesome is amazing. This thing seems durable and Iâm excited to see future versions and videos đ€
Really appreciate that man! Iâm excited to see the next ones too!!
Looks way better than before.
And you are right, it needs to be wider.
Hang tough, this winter you will get version 5 and it will be awesome!
đ€Łđ€Łđ€Łđ€Łđ€Łđ€Łđ€Ł
@@Multi-Skill-Bill Amen to that Bill
I was thinking version 7 by winter with an announcement for 9 đ
@@DerbyCityRC rofl! đ€Łđ€Ł
đđ
@@DerbyCityRC you sure?
version 9?
HAHAHA
đ€Łđ€Łđ€Łđ€Ł
Great job as always. It seems like you have reviewed hundreds of cars over the years. So much variety on you channel. Awesome ! đ
Thanks!! đ đ€đ„đ€
Great video as always! Question...do you sit around just thinking of what parts you can take off one car and put on a completely different one? You should start a 2nd CZcams channel and do that on full size cars! I want F350 wheels and tires on my 1989 Ranger!
Haha! If thereâs something specific I want to do to one I do đ
I do actually have plans for a second channel with âdifferentâ types of projects. Some RC related and some not. Just gotta figure it out more lol
Very informative of the Rc!
Thanks!!
I have a red 1/14 with two 3s square batteries... Never have had these before. Never used em since I got them yet. The car came, with tons of extras. The aluminum they offer factory is great..!!! I'm gonna have to wide the car with the slash 1/10 carbon fiber and aluminum red.. because it's already aluminum. I hope it turns out nice. I have rlarrlo 1/14 aluminum needs one left steering arm. I'll donate to the rc cause anytime...!!!
Up to 18k subs! Awesome work.
Yes! Thanks man!! đ
They should ask you for engineer opinion to use in mjx drawboard đ nice ideas and amazing videos, you are killing it my friend.đ
Thanks đ đ
I think for the self righting and for standing backflips you are suppose to be with willlie bar off.
Thanks for the update. looks like a beast now.
Possibly! It did work in the grass though đ youâre welcome!! đ
They have a long way to go yet with this rig
Letâs see how the next model looks! I think theyâll get it eventually.
Very cool video! Your version worked out đ Now lets see if theirs does đ
Thanks!! I sure hope so!! đ
"The Far Right Hole" needs to be a t-shirt. bahaha
Haha!! That would be a good one!!
I see what rlaarlo meant when they said they arenât worried about this one⊠too many things that need improvement unlike the Omni terminator.. which just needs fluid and thread lock to be bashed around hard, steering and suspension are perfect out the box
I get it too. This one does have the size and power though. This one has too much loctite and Omni didnât use enough lol
Another excellent video! I was wondering, how do you decide which manufacturer parts will fit? You chose Arrma for this video, but would Traxxas or Associated parts work? Thank you!
Thanks! Really it was looking at what I have on hand and then physically testing it if it looked close lol thereâs probably something out there somewhere that would make this work.
Fantastic job on the mods Nate hopefully MJX will see this video to see exactly what this 1/10 scale truck needs to make it handle a whole better?đđđ
Theyâll definitely see it along with all the other videos! Hopefully they have time to do all this for the next-next version! Lol
@@DerbyCityRC Keep your fingers crossed Nate? đ
Definitely đ
@@DerbyCityRC BTW May I wish you and your Happy and safe 4TH OF JULYđ
@3DMOFO2020 thanks bro and you too!! đ„
They definitely need to lower the price on this one to maybe $220ish because it looks like the tires are too thin and have to be swapped out immediately.
Well hopefully the new version has better tires! I think $250-$260 is decent which is where it seems it will be for now, but definitely still some concerns.
Nice job . đ
Thanks!!
Those arms and center diff sure look similar to another 10 scale truck.
I need to find that spur gear.
Insert evil laughter.
Theyâre almost identical lol. They would 100% fit but it uses the same ones for the rear. đ not sure if that sour would work out not.
I love you content thanks for your hard work in every video !
I have a granite 1/10 i want bigger tires which ones you recommend?
Thanks!! đ so the exact tires I used on this video are what most people recommend for the granite. I havenât tried yet, but they do come with the adapter to fit the granite. Technically theyâre the same size but they sit slightly taller because the tread is thicker. I have not tried any that are bigger. Itâs these bad dudes right here: amzn.to/3L91EfT
@@DerbyCityRC thank you !
At this point you should be mix official reviewer!!!
đ đ€
Hey bro Iâm looking at buying one of these mjx car for bashing and stuff. Which one would you recomend
Well more than likely this will end up being my favorite MJX model. For size and better stability over all their other models.
I knew you would make a great video out of this mess đ€đ»âŠ man, if you could have gotten that âwide kitâ together⊠would have been even cooler
And what a mess it is but I believe it will soon be cleared up! Dude I tried sooo hard đ. Literally probably for like 4 hours to try to make that work! Hopefully mjx just does it!!
I ordered a ski slope ramp like that one finally .
Sweet! If itâs the same one I have make sure to get the reinforcement kit! Mine is starting to lean and waiting for that kit to come in.
Looks good :-)
Thanks man! đ
This thing reminds me of the traxxas hossmore than any other truck everyone has compared it too
Nice! I donât have one so I wouldnât know!
That center diff looks almost identical to the Associated Pro4 SCT (and MT10) which nobody makes a metal spur gear for. Hmmm....
Might have to check it out đ
Double B's! I love that. How many trucks did you cannibalize to try to improve this one though?? haha
đ I had 4 cars atleast partially taken apart at one time lol. All back together now except for the redcat. Just need to reinstall the axles lol
Do you have a double wide backyard or just really cool neighbors?
Itâs ours. Itâs about a 1/2 acre. Was pretty much one of the prerequisites when we were looking for houses lol I wouldnât even go look at houses with smaller yards than 1/2. Wanted more but the search took way too long.
AYY NEW VID â€
Yea bro!!! đ€đ„đ€
@@DerbyCityRC đŁïžđȘđȘ
I have mixed feelings about the updated versions that may or may not come. One one hand it's good that they improve their cars on the other hand it makes me hesitant to buy one (will you get the latest version? Is there a new version coming soon?).
I definitely get it. I touched on that in the end of the video as I got a what is hopefully an official update just yesterday. Looks like an updated V1 on a few weeks and an actual V2 in a few months. So ya I wouldnât buy it yet.
Good job man. I always thought this truck just needs to be a little higher a little wider and a little fast. Just a few changes and I think ur thinking the right direction. Bash brake repeat!!!!!! Fuck it up. Lolđđ
Thanks! I completely agree! đ
MJX left a bad taste in my mouth after the 14210 I got ugh just the worst lol! Great video ....no dancing but still good video lol!
Yaaaa⊠is it the unstable-ness? Try any different tires? My widening solution? đ
Yup I didnât see any goblins this time around đ
@@DerbyCityRC More handling its just so dang squirrely. I widened, diff servo, suspension work, new controller and receiver and still just can not stand how it drives. Got the Omni Terminator carbon version and LOVE IT! Handles night and day difference!
@Gamebit450 oh ya man the OT is one heck of a car. Nothing else like it smaller than a 1/10 that Iâve ever had!
Great work from your side. Now mjx has to top your versionâŠ
I truly hope they do!! Really wonât take much honestly lol
Could you do a speedtest with the 15T pinion please? I think it's 47mph on the stock 12T.
Yup it was 47 on the 12t pinion on 4s. I almost did a speed test this time but that squirrelly rear end kinda made me not do it. One of the possible upgrades for this next version are tighter tolerances that may improve that, so I may do it on the next version I review. Depends on how it all unfolds. My guess with that pinion and bigger tires it would be atleast 5mph faster.
@@DerbyCityRC Ah, yes, I forgot about the rear instability. My bad.
Top speed might be over 60mph :) 15/12*47=59 plus bigger tires.
@janklaassen6404 I donât know the math. So thatâs cool!! Iâll definitely do it eventually. Maybe with the v2âŠif/when!
DC RC SURGERY đź
We tried! đ
@@DerbyCityRC And we all appreciate that. Keep tinkering till we figure this dang thing out.
And I enjoy the process while we all learn something đ
Me too! đđ
But we all know if they make them perfect out the box weâd have nothing to upgrade đ€·đ»ââïž
That sounds lame!! đ
Mmmm this one is a pass for me, the way you talk about the old hyper go made me think about adding it to the collection, I was interested in this new one but after seeing this Iâll wait to see your review of the V2 and see how that turns out..
Ya Iâm definitely hoping for a solid v2!!
Drive it on the trampoline? Both my bashers cut off before I make a full circle on my daughter's. Guessing it's from static?
Never tried. Thats interesting though I guess it could be.
its a lot better but still not worth it in my eyes
upgrading cars to make them good makes them also more expensive
i still pick arrma granite or outcast v2.5
Yup. This was mostly for fun but still hopeful about these next versions.
Outcast 2.5 beats everything!
@@DerbyCityRC treu but if they get upgrades out of the factory they will probably increase in price
a way to make the outcast v2.5 get better stearing is by fitting the losi lmt servo saver
i will place 1 soon my outcast
does your outcast run hot?
@politie_jip112 hopefully it wonât run up the price as price has big one of the biggest criticisms so far. I havenât run my outcast for a few months so I canât remember for sure. That lost servo saver sounds like a good idea!
@@DerbyCityRC i suggest watching a video how to install it
you'll need longer screws and 6mm on both sides for servo spacers
i just cut into my mjx parts car for the spacers
@politie_jip112 sweet. I appreciate it!
Your back yards huge why dont you build a track??
I absolutely have plans for better dirt jumps back there and a small track. Issue is itâs all on a very slight slope (especially where I want the track to go) so dirt would wash away pretty quickly. Trying to figure out the best solution.
looks like you made a granite v4 if anything đ
HyperGranite! đ
I dont understand why companies like mjx dont just buy an xmaxx or kraton (or whatever the best thing is at the time) and copy it just enough to not get sued. And dont use cheap plastic either. Use the good stuff.
I think they do sorta do that. Lol
They got a lot of inspiration from the granite AND the MT10 here. The trade off to the flexing plastics is more durability for crashes. Which weâve seen a lot of crashes across several channels now and very few breaks so it works, but ya... Itâs a trade off. I swear I think rlaarlo got it right with the Omni terminator. The plastic is solid yet it still can flex under extreme loads.
@DerbyCityRC that is on sale right now too.... hhmmmm.
@JP-qq2kn its not any cheaper than it has been. Just the same deal it has been, but it is still a decent deal lol
â@@DerbyCityRCmine, and everyone else's Xmaxx has that rubbery plastic everything and they handle like crap to. Suspension components require a rigid mount to function. It's a trade off. I prefer my big Arrma trucks and Redcat nailed it with the Vigilante. It's the best handling large scale plastic chassis I've had by far. It handles and especially lands jumps much better than my Xmaxx. It drives like I'd Arrma made a big plastic truck.
I'm definitely getting one of these but it'll be after version 12345 or whatever number it takes to get it properly sorted. I've got way to many rigs to bash already to be knowingly buying bad ones.
Yup definitely a trade off! Thereâs a few things they could do to stiffen that up a little bit that shouldnât hurt durability too bad. We will see how the next version does. Iâm sure we will have a version 7 by winter with an announcement for version 9 đ
Yay first to "Like" :)
Noice, thanks dude!! đ
This version just isnât worth buying and there is so much talk about whatâs coming to what CZcamsrs got Iâd be very dubious about buying one. Beyond RC made some statement about it from his supplier which made me think maybe he is just supporting him as he has a container full on route so would lose money on bad sales. Version 1.5 version 2 until we see it Iâm thinking itâs all talk and I really hope they donât lie and send these out as an updated version just to get rid off them
Man I know. Seriously itâs been so confusing. Now what it looks like is happening is we will get a âbetweenâ version. A V1 plus I believe theyre calling it. I should have one pretty soon and my Makerfire rep assured me any orders from them or really any registered mjx dealer will be getting that. So letâs see what that looks like and how the upgrades help, but then supposedly an actual v2 in just a few months.
amico sei meglio degli ingegneri
Haha, thanks!
It's a arrma wana be!