If you have any local thrift stores or junk shops, try looking for boards there. They won't be THE BEST quality but with a bit of searching you'll be able to find a decent one for a rlly good price
This is probably the best tutorial on CZcams because it actually shows you how to progress to doing the powerslide. Despite the powerslide clearly being the best way to brake and most useful, it is by far the hardest. It is easily an intermediate to advanced technique and this tutorial teaches it really well even tho it's really short. Although one thing i think you should include that you dont need to necessarily get that 90 angle. Only if youre going really fast do you need it. The issue with doing it at 90 degrees and going slow is that itll catapult you forward which can be dangerous, I twisted my ankle from it once.
Dude this is one of the few techniques that i got down in one session. Was very stoked and tried it going down a hill and i was pleased to say that i controlled my speed. It was a slowe pace, wasnt going 20mph
Worth noting that this always works well on a snowboard when you are learning . As far as on a board, the firmness in your wheels comes into play here in a major way. Be ready to lean back way further on softer wheels, especially old-school urethane like Kyrps or Bones.
I wish you covered the most important part: where is my weight. Whenever I try to power slide I lean back kind of like a FS 180 and try to push my back truck forward and it doesn't really work out
Bigger softer wheel make it harder. I've been trying to do it while going down hill to reduce speed and it just wouldn't slide although it worked on flat ground. I guess it's wheel and surface combo. John, your board's wheels look tiny compared to mine. Another theory is that my posture changes from flat ground to downhill. Any tips?
I once just did a full send fast and almost did a front flip, fell not the back of my jead my shoulder was bleeding, my knee, my palm, and my phone and groceries fell
Hey I watch the videos and I'm hoping you a good skater you baby baby good skater I hope you know I love my skating for mostly you I always I always all my life and I saw you and I know I did but skateboard are my best life and I'm skating I'm not a good skip I'm still I'm really hoping you have😊
Depends on the wheel and the setup. I have some 83a Otangs that are grippy for carving but will still kick out and slide easily once they are nice and broken in. The shape is also designed for slides even though the durometer is soft. That durometer on a wheel with a thin outer lip would not break free nearly as easily if at all because it’s designed to flex when you turn and put pressure on them which makes it far grippier. So basically there is more to it than just the hardness of the wheel
As someone who is currently skating towards the edge of a cliff this helps me
Make sure to practise with low speed at first
@@Linkmin-0912 welp, too late...
@@DaanSkatesYTLMAOO
Edging in the cliff is crazy
Did it work??👀 Say nothing if you fell and died. I'll leave a dislike in your memory🙏
my skateboards so bad it stops by itself 😭😭😭🙏🙏
AMEN BRO PLEASE HELP ME 😭
If you have any local thrift stores or junk shops, try looking for boards there. They won't be THE BEST quality but with a bit of searching you'll be able to find a decent one for a rlly good price
I have the same problem i think im just fat tho
Moye moye
I got a full setup that was barely used second hand for cheap
This is probably the best tutorial on CZcams because it actually shows you how to progress to doing the powerslide. Despite the powerslide clearly being the best way to brake and most useful, it is by far the hardest. It is easily an intermediate to advanced technique and this tutorial teaches it really well even tho it's really short. Although one thing i think you should include that you dont need to necessarily get that 90 angle. Only if youre going really fast do you need it. The issue with doing it at 90 degrees and going slow is that itll catapult you forward which can be dangerous, I twisted my ankle from it once.
Those chips are the only thing I can relate to 😫😂
LOL 🤣
Fr that board is BEAT
Thanks I've been trying to powerslide for a long time now
Thank you for this video, truly
Best lobster fit on the internet
It makes him look like he has bindings on his board lol
I know
I've never seen a better powerslide tutorial
Dude this is one of the few techniques that i got down in one session. Was very stoked and tried it going down a hill and i was pleased to say that i controlled my speed. It was a slowe pace, wasnt going 20mph
This trick is the best way to give yourself flat spots on your wheels so everyone can hear you coming a mile away and you lose all speed. 😂
That’s why you get bones stf
I love your videos
you made it look so easy
That's cuz it is easy
Bros board done seen better days 😭🙏
KILLIN ME WITH THE 🍊🦞’S!!! Golf Clap.
Nice orange lobster!
I have Skateboard and I'm gonna try and learn to ride it thanks to your videos
Thank you 👍 !
Worth noting that this always works well on a snowboard when you are learning .
As far as on a board, the firmness in your wheels comes into play here in a major way. Be ready to lean back way further on softer wheels, especially old-school urethane like Kyrps or Bones.
The revert back is the hard part thanks for the tip
Bro shoes look nice😮💨💖🔥
The lobsters nooooooo bro crazy😮
I appreciate you helping us posers out 🙏
I know this isn’t related but doing that is also one way you can stop when your snowboarding
With orange lobsters😮
Thanks bro
Yooo! I did it thanks bro
New sub and thank you for info
This actually helps
cool tips, i just did a backflip and barely breathing
TYSM
I love how on easy trick videos he says "beginners and posers listen up"
i love how you do that on this longboard ur riding
I'm scared to do it while going fast or on a hill gimme a tip on how to get over my fear please 😭
Just gotta send it. You're gonna fall, its inevitable. But the more you do the better youll get. If you don't full commit youll ALWAYS fall tho
Carve into the power slide going down hill first to get a feel for it
with the lobsters!! love how you actually use the kicks the way they intended
Not the lobsters😭😭😭😭😭
Well... they ARE SBs to be fair
They’re like £300
The yellow ones are like 50k and the blue ones are like 2.5k
@@Samsungsmartcookergay sneaker head prices. The original prices were in the 100 range
i've notice that hockey and FA boards always chip around the edges of the nose and tail. Never skated those decks, but know johnny likes those decks
I wish you covered the most important part: where is my weight.
Whenever I try to power slide I lean back kind of like a FS 180 and try to push my back truck forward and it doesn't really work out
skate those sb’s
Step 1: Make sure you have formula 4s, bones will work but it’ll get a flatspot more easily
Can I do my research project on u plz, it is about sports and skateboarding is a sport.
Ive never been offended before hearing the word poser until he said it
Lobster dunks
i just wanna be cool and dress like all the 90s kids and pose and be cool.
Where do u buy that shoes ? I like them
Nike dunks lobsters.
goat or stockx but unless you buy reps they’ll be hundreds of dollars
I snowboard and this is easy but in a skateboard it’s hard
Bigger softer wheel make it harder. I've been trying to do it while going down hill to reduce speed and it just wouldn't slide although it worked on flat ground. I guess it's wheel and surface combo. John, your board's wheels look tiny compared to mine. Another theory is that my posture changes from flat ground to downhill. Any tips?
Hey plz could you give me some skateboard recommendations for my first skateboard
Bro is skatin on lobsters hell no theese coast a thousand bucks man
Powerslides will only work with hard wheels as far as i kno
I once just did a full send fast and almost did a front flip, fell not the back of my jead my shoulder was bleeding, my knee, my palm, and my phone and groceries fell
The lobsters thoooo 🪦🦞
Gotta build up that mini turbo
Nice orange lobsters
I feel like it’s time for a setup ASMR (baby)
How does it slide on the ground? Whenever I try to push the wheels across the ground without lifting them they just don’t slide across the ground
Definitely won't try it on my cruiser with soft wheels😅
It depends also on the kind of wheels....if you have soft wheels, will it work?
My skateboards wheels r kind of rubber 🎉😢😅 but it’s not bouncy so can I still brack
Would you recommend this for beginners or more advanced skateboarders?
I’m thinking about picking up skateboarding sometime soon. Any tips for when I start out?
do not give up when you can’t balance on the board it will feel as easy as walking after a few days
To Let's see if you could do the spin board
Let's see if you could do spend board
Let's see if you could do the spit board
what wheels do you ride for street - best for power slides?
what kind of wheels do you have
Brooooo I used to live there I moved like a month ago I used to take that bus stoop to school
Im scared to even ride on skateboard😅
Instructions unclear broke my wrist leaning too far back
Hey I watch the videos and I'm hoping you a good skater you baby baby good skater I hope you know I love my skating for mostly you I always I always all my life and I saw you and I know I did but skateboard are my best life and I'm skating I'm not a good skip I'm still I'm really hoping you have😊
Why does it look like he is in the skate 3 map😭
What is the worst injury you had skateboarding i broke my leg skateboarding
That board has seen some things
I down hill power slides
can u do that with soft wheels as well
Is this bad for rubber wheels?
day 98 of asking johnny to skate with me at rsm
Can you show me how to do it with a penny board
i cant even do that on a tech deck
That first clip of power sliding was long
What shoes are you wearing?
Nike sb orange lobster resellers ruined the price tho
Ur great I’m 8 I can do a pop shovit
Sliding across the screen like that didnt even look real. Lol
My wheels are too soft 😐 I guess I need harder ones
A power slide can mess up your wheels really badly.
Whre do you get your decks from?
Does it work on rubber/soft wheels?
Not really. If you get the 93a peralta dragon wheels they are smooth riding but still slide
I got rubber wheels
Depends on the wheel and the setup. I have some 83a Otangs that are grippy for carving but will still kick out and slide easily once they are nice and broken in. The shape is also designed for slides even though the durometer is soft. That durometer on a wheel with a thin outer lip would not break free nearly as easily if at all because it’s designed to flex when you turn and put pressure on them which makes it far grippier. So basically there is more to it than just the hardness of the wheel
How about wave board
Sess slide !
my wheels stick to the road and don't let me slide
Does your bearings need to be loose or your truck or does it not matter
Does not matter
But how do you poweslidd backside???
Push with your toes
NANI
bro what pants do you wear?
What wheels are the best for powerslides?
Skrow’s?
screws?
Does Johnny have a Nike sponsorship?
You can fall forward
I'm a beginner and I don't know how to jump with a skateboard
I still dont know how to backside powerslide😢
Doesn't it hurt your bearings
When I turn my skate board it increase speed 😢😢