2011 Audi S5 Windshield Wiper Alignment
Vložit
- čas přidán 27. 07. 2024
- Performing a wiper alignment on an 2011 Audi S5. Sometimes, when a new windshield is installed the wipers may not be re-installed in the correct position requiring you to perform a re-alignment.
Tools used:
Wiper Arm Puller Tool (8mm Hex bit)
Tape Measure
Torque Wrench
13mm socket
Ratchet and extension
Pry tool
Torque spec:
Windshield Wiper Arm Nut - 12.54 ft-lb (17 Nm)
Audi part numbers:
Windshield Wiper Arm Nut Cap - 5N0 955 205 9B9
00:00 - Intro
00:19 - Before
01:03 - Tools
01:56 - Putting wipers into maintenance position
02:57 - Opening hood and removing wiper cap
03:42 - Removing wiper arm nut
04:00 - Wiper Arm Puller Tool
04:57 - Pulling the wiper
06:03 - Closing hood and putting wipers into parked position
06:39 - Opening hood again
06:55 - Reviewing the Audi adjustment procedure
08:13 - Installing and adjusting the wiper
10:22 - Windshield wiper tightening
10:49 - Installing wiper caps
11:24 - Closing hood and placing wiper into parked position
12:22 - Before and after comparison
12:59 - Outro - Auta a dopravní prostředky
My passenger side wiper blade on my S5 sticks up even further than yours did… such an eyesore. Now have the perfect video to follow to fix it!!
Yeah. After they replaced my windshield. They didn’t align mine correctly. Appreciate the video.
Audi is always on top❤
Promo'SM