ETHOS: Binding ACCESS and TANDEM Receivers for Beginners
Vložit
- čas přidán 5. 09. 2024
- Link to the other videos in the series: • ETHOS and FrSky X18S: ...
Video on failsafe on ACCST: • OpenTX Quick Tip: Fail...
See how to bind ACCST V1, D8 and LR12 receivers here: • ETHOS How To: Bind to ...
Thank you for taking the time to watch the video. You can find me on social media at / painless360
/ painless360
www.thingivers...
R/C is one of my hobbies and I do this for fun. I don't do this to replace a day job so if you have found the content useful then and want to support the time I spend helping others and creating content then please consider liking the video and subscribing. It helps a lot!
If this video helped you and you want to support the channel you can use these links:
/ painless360
paypal.me/pain....
Remember that reviews are subjective. Don't rely on one persons opinion - watch reviews and make your own mind up. Where-ever you can support your local R.C resellers and shops, they need your support more than ever.
If you liked this you can see more R/C related videos on the channel - / painless360 , use the playlists to find entire series on topics you might find interesting.
Be aware that any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.
Thanks again for watching, support each other and the hobby as we have enough external drama without making more for ourselves.
LIKE and SUBSCRIBE and above all - Happy Flying!
#drone #painless360 #review
I just purchased my first FrSky X20S. Thanks for a straightforward video on binding the RX. Can't wait to start moving my fleet of planes over to FrSky from Futaba. Lost 3 planes recently all on Futaba but different protocols so I really wanted to move to dual band. Almost went Jeti but with 50+ aircraft Jeti would break the bank on receivers for dual band.
Good morning Lee. Thank you very much for your regular visitation to this new (for me) radio system. I am very interested in getting back into rc planes (FPV) and have my eyes fixed on the Frsky Ethos radio system. This series of you explains it clearly and I am very excited that I have found the radio I have been searchin for. I have watched all your other videos since I subscribed and like the wide variety of topics and your clear explanations of them. A real goldmine for the future. Regards from SA
Do yourself a favor and don't give frsky your money
Pretty interesting process indeed, Lee! 😃
Thanks for the tutorial!
Stay safe there with your family! 🖖😊
I have an rc sailboat, I want it to have a great range. Can you recommend a transmitter and receiver to achieve a long range.
I'm not sure about ground vehicles but lower frequencies work better for aircraft... Best of luck
Hi! I guess there is no such thing as mix and match? I mean binding a Access receiver and have a TD (such as the TDMX) for redundancy? Is it all access or all TD? Thanks
I'm not sure, I've not done anything with the FrSky stuff since these videos. Best of luck.
Well done, Please also show how to update TD r10 receiver firmware via S-port
Hi just wondering,is it possible to use Tdmx reciever as a back up for r8 pro reciever?
Hi I have just come across an anomaly between the x20s and the x20 Pro when you select external antenna on x20s it states to put antenna into ant 1 for 2.4ghz but when you select external antenna for 2,4 on the x20 pro its states socket antenna 2?
I am making assumption that frsky would have no need to change position of the 868mhz and the 2,4 between the two radios. Could you confirm if this is indeed correct or if there is an error in the firmware between the two..
Regards
Barry
I can't confirm as Frsky no longer talk to me. I'd ask a Frsky reseller. Best of luck
For LOS flyers (and some basic fatshark scout FPV) and spektrum transmitter and spektrum receivers, will F4 flight controllers be compatible? Trying to move into inav and gps and osd world. Thx : )
You can use the radio with systems like INAV. You can use a multiprotocol module on the rear of the radio now to talk to some Spektrum recievers. I would use one of the little ACCESS recievers that are perfect for flight contollers.. Happy flying
Thanks much, great channel 👍
I was wondering if the Pixhawk works with the Access receivers. I couldn't get my R9SX to talk to respond in Qgroundcontrol. I switched to a different receiver and it worked fine.
Should do. Use SBUS... Happy flying
Hi Lee what's the advantage of the 2 steps (register and bind) rather than just binding in asst?
When you register, the RX is associated with the TX. At that point you can bind to any model without touching the bind button.
That doesn't sound all that useful, but actually registration associates the RX with the _owner ID_ in your TX. This means you can buy a second ACCESS TX, configure it with the same owner ID as your primary TX and then all of your RXes will be registered across both (kinda the like the ELRS binding phrase). If you wanted to switch over to your backup TX for a particular model, you just need to bind the RX to the model slot (now super easy, just press bind on the TX and then power on the RX).
Under the hood:
1. Each TX has a unique owner ID (configurable, so you can make all of your TXes have the same ID).
2. Registration writes that owner ID into the RXes memory, meaning the RX will accept binding requests from TXes with that owner ID.
3. Binding activates an RX on a particular model slot (I'm not sure of the mechanism here - whether the model ID is written into the RX memory or the RX ID is written into the TX memory).
I just figured all of this out myself, hence you get a fresh brain dump 🙂.
I just got a tandem x18.
I followed your simple steps to register and bind an access receiver, but in my scenario the transmitter (internal module, access registration mode) just sits there waiting for the receiver (grx8/access). I set everything up according to your access receiver instructions.
I even tried to register a different receiver (an S8R) and still get the same thing. Any suggestions we?
Nothing sure. I'd contact the vendor for support. Best of luck with it.
Hi Lee, I was wondering if the same receiver can be used on Radiomaster tx16s?
ACCESS and Tandem are not supported by the multiprotocol modules. They are closed, proprietary systems. Happy flying!
Hi. I’m very new to FrSky/Ethos. I’m a Spektrum user. So I just received my X20 with the TD R10 receiver. Following your step by step procedure on the bind process. Everything went smoothly. But when I plugged in a servo to channel 1, the servo just keeps pulsating. Same thing on channel 2. Also when I go to “set” after binding, the radio says “no response from the receiver “! Why is this not working right? Is it because I haven’t updated my firmware? It’s over a year old. 1.0.9 FCC. Dated June 15, 2021. So obviously Horus sent me a very old stock! 😡 I also just ordered a new laptop computer which is arriving next week. So do I have to update the firmware first to get the system going smoothly? Appreciate your help and advice. Thanks!
I'd start at the beginning of the series. Update should be step one so you are running the latest version of the firmware on the radio... Best of luck
@@Painless360 hello. So I’ve updated the firmware on my radio to the latest version. I went thru the register and bind process step by step with success per your video. I also assigned channels to the different control surfaces in “outputs”. Did the binding process several times. Connected a servo to channel 3 (throttle). Moved the throttle stick and nothing happens. Went to “outputs” to check movement, nothing either. Once again, am I missing something? My TD R10 receiver light is rapidly flashing blue. Please advice. Thanks.
CAN YOU BIND SPEKTRUM RECEIVERS WITH FRSKY X20S
Yes using a multiprotocol module... Happy flying
one question if i am using dragonlink receivers?
I have no experience with Dragonlink. Best of luck
shouldnt it be 868 for uk?
Same as all other systems that use the 900M frequency (Crossfire, R9M etc)
Alıcın kaç km menzil var
Menzil burada Birleşik Krallık'ta yasal olarak sınırlıdır, bu yüzden buna cevap verecek kişi ben değilim.. İyi şanslar.