The video was very helpful . I still say northing beats cable internet telephone is good. I say do the work lumina makes great vans the catlaic converter makes a great difference
audubon5425 how did you take the evaporator core out ? how about the cooling gas in the air con compressor system ? did you use vacuum pump to capture the gas ? thx andrew
huh ? you vacuum the air con system only after the evaporator core removed ? is there a seal or valve inside won't allow the refrigerant to all rush out when you disconnect tthe evaporator core ? thans andrew
You don't have to do all that just reach in through blower motor resister hole and blower motor access use vacuum with small tube engineer a soft scraper use brush with long handle get everything that's loose then spray with strong degreaser (I used Awesome) then flush with water ,Ines was clean as a whistle, took about 30 minutes but only cuz I was annal about getting everything
@@Supaman5988 LOL I'm not doing it again just to post a video but it is possible and not that hard. Pull the blower motor and the fan speed resistor and work through those holes, most of the time the glove box comes out to gain access. As a rule the only fins that will need clearing are those you can see. What's left after using this procedure is not worth the extra work of pulling the evaporator of further disassembly. I've used this process on other vehicles besides the Nissan. Pretty much required when revamping systems on older cars and trucks without an environmental filter. The A/C system works as a whole and if air flow is restricted at the evaporator an otherwise good system will not cool to it's full potential if at all.
A mi nissan 1993 se le verificó todo el sistema y el gas y no enfria bien cuando hay sol y si estas estacionado enfria menos y sube la temperatura del motor y no doy con el problema pero cuando vas en el expreso manteniendo el motor acelerado comienza a enfriar y la temperatura baja y enfria el aire. De hecho el fancluch enta bueno
I have a 1993 Nissan pick up the condenser is leaking I have to remove it ... But they told me I have to take to dash board off !! Then I see in this video you didn't remove all the dash board .... So now what should I do ???? I have to remove the condenser. Do I have to take all the dash board or just the glove box ?
Ram M457 The dashboard was changed for '95 I believe so I couldn't tell you for sure. All you can do is get under there and see for yourself. Good luck with it.
Video helped out a lot thank you and entertaining monologue as well
thanks man
The video was very helpful . I still say northing beats cable internet telephone is good. I say do the work lumina makes great vans the catlaic converter makes a great difference
audubon5425
how did you take the evaporator core out ? how about the cooling gas in the air con compressor system ?
did you use vacuum pump to capture the gas ?
thx
andrew
huh ?
you vacuum the air con system only after the evaporator core removed ? is there a seal or valve inside won't allow the refrigerant to all rush out when you disconnect tthe evaporator core ?
thans
andrew
Ok took mine out just like you did ... I don't understand why the dealer told me they had to remove all the dash board .
To make money ! More time spent , more profit !
So it makes it sound like rocket science 🚀
what did you do to clean the evaporator? water hose?
Happy easter Audubon,
You don't have to do all that just reach in through blower motor resister hole and blower motor access use vacuum with small tube engineer a soft scraper use brush with long handle get everything that's loose then spray with strong degreaser (I used Awesome) then flush with water ,Ines was clean as a whistle, took about 30 minutes but only cuz I was annal about getting everything
Post a vid so I can see lol
@@Supaman5988 LOL I'm not doing it again just to post a video but it is possible and not that hard. Pull the blower motor and the fan speed resistor and work through those holes, most of the time the glove box comes out to gain access. As a rule the only fins that will need clearing are those you can see. What's left after using this procedure is not worth the extra work of pulling the evaporator of further disassembly. I've used this process on other vehicles besides the Nissan. Pretty much required when revamping systems on older cars and trucks without an environmental filter. The A/C system works as a whole and if air flow is restricted at the evaporator an otherwise good system will not cool to it's full potential if at all.
Hey sir I was I wasn't able to remove that whole compartment off so I just get the water hose and wash it with pleasure is that okey please help
A mi nissan 1993 se le verificó todo el sistema y el gas y no enfria bien cuando hay sol y si estas estacionado enfria menos y sube la temperatura del motor y no doy con el problema pero cuando vas en el expreso manteniendo el motor acelerado comienza a enfriar y la temperatura baja y enfria el aire. De hecho el fancluch enta bueno
I'm confused why you risked using damaging chemicals to remove the ants. Wouldnt they get washed away as part of the cleaning process?
6:03: "AC condenser"?
I have a 1993 Nissan pick up the condenser is leaking I have to remove it ... But they told me I have to take to dash board off !! Then I see in this video you didn't remove all the dash board .... So now what should I do ???? I have to remove the condenser. Do I have to take all the dash board or just the glove box ?
Ram M457 The dashboard was changed for '95 I believe so I couldn't tell you for sure. All you can do is get under there and see for yourself. Good luck with it.
The condenser is in front of the radiator. The evaporator is behind the dash
No dont poison in there bro!
Ok
Just replace it