These are great tips and videos! Can't wait to get this done on my new pool deck. The color isn't even close to what I had chosen. It was the color when it was laid, but once it dried, it lightened up way too much. Your product looks like what I need.
How do you go about mixing the 1 gallon of paint for color to the 5 gallons? Do you do it all at once to keep it even and so you need at least a 6 gallon bucket? what is the process?
If we wanted to go white, but add those little black flakes like you see on those garage floor coatings, is that something that can be added after applied and still wet?
Negative, COOL! Dries too quickly and you’d be scrambling . I have another video on decorative finishes but it involves hopper guns and air compressor . Check it out regardless ! Thanks !!!
@@encorecoatingsuniversity3203 Does Marie maybe mean , she wants to do the natural color of what ever you product is. So what is the color match to the encore and purchase 1 gallon in that color?
You cannot go wrong with any paints in this video. My personal favorite is A-100 from sherwin Williams. All buckets also come with a physical card with paint choices for your perusal .
Storm coat makes the COOL extremely thick and difficult to work with, nearly impossible. This also affects the bonding capability and overall performance ! Very important
Yes it should do fine and don’t hesitate to reach out to us during the project for guidance! Two good coats of COOL, not too thick not too thin, and 2 modest coats of SealBack Clear Sealer. Thank you! (888) 776-2242
@@encorecoatingsuniversity3203 If I prefer to use flat paint to mix with the Cool mix, after the 2 coats of SealBack Clear will my finish be flat or semi gloss? I always prefer flat finish.
These are great tips and videos! Can't wait to get this done on my new pool deck. The color isn't even close to what I had chosen. It was the color when it was laid, but once it dried, it lightened up way too much. Your product looks like what I need.
I'm here to help! Give us a shout anytime. You might get Ryan on the phone but ask for me if you'd like. Thanks a lot!!
Hey just bought your product gonna put down tomorrow. On the BEHR ULTA does it need to be acrylic or enamel. I appreciate it
@@jtlracer0707 go for acrylic if there’s a choice! Thanks
How do you go about mixing the 1 gallon of paint for color to the 5 gallons? Do you do it all at once to keep it even and so you need at least a 6 gallon bucket? what is the process?
If we wanted to go white, but add those little black flakes like you see on those garage floor coatings, is that something that can be added after applied and still wet?
Negative, COOL! Dries too quickly and you’d be scrambling . I have another video on decorative finishes but it involves hopper guns and air compressor . Check it out regardless ! Thanks !!!
@@encorecoatingsuniversity3203 Thanks for the reply!
@@Nine-ni9do of course! Call us anytime (888) 776-2242 Monday thru Friday !
Has anyone used the SW Emerald line of exterior paints with this?
Don’t use emerald it’s too thick and has a solids content that is too high for COOL, go with A-100 !
I want to put this on my cement around the pool but I don’t want any color. What do I use?
Color is a must, this product requires the gallon of paint and cannot be “clear”.
@@encorecoatingsuniversity3203 Does Marie maybe mean , she wants to do the natural color of what ever you product is. So what is the color match to the encore and purchase 1 gallon in that color?
This is really confusing. Behr Ultra is a paint and primer in one, yet it says do not use this? It's also Enamel
You cannot go wrong with any paints in this video. My personal favorite is A-100 from sherwin Williams. All buckets also come with a physical card with paint choices for your perusal .
Why not storm coat?
Storm coat makes the COOL extremely thick and difficult to work with, nearly impossible. This also affects the bonding capability and overall performance ! Very important
I bought a gallon of A100 but I got flat? can I sill use it? ty
Yes it should do fine and don’t hesitate to reach out to us during the project for guidance! Two good coats of COOL, not too thick not too thin, and 2 modest coats of SealBack Clear Sealer. Thank you! (888) 776-2242
@@encorecoatingsuniversity3203 If I prefer to use flat paint to mix with the Cool mix, after the 2 coats of SealBack Clear will my finish be flat or semi gloss? I always prefer flat finish.
@@stymie09 the sealer will always be satin to semi gloss, so I recommend a satin paint for added enamel