Heres why I'm 1UZ swapping my IS300
Vložit
- čas přidán 27. 08. 2024
- Freddy explains why he is 1UZ swapping his Lexus IS300 instead of turbocharging the 2JZGE.
PMM store:
► www.amazon.com...
Tools that you NEED
►AWESOME Screw Drivers: amzn.to/2XnZuDv
►Amazing Electric Ratchet! amzn.to/3kb90mm
►POWER PROBE amzn.to/3lqoi6c
►OBD2 scanner amzn.to/2JLRCkE
►Welder: amzn.to/39dbM42
Automotive Products I HIGH recommend
►Turtle Wax Seal n Shine: amzn.to/32AEPtL
►194 LEDs amzn.to/2xXxNBu
► Dash Cam amzn.to/2JTrvIs
► / pmmods
► / poormanmods
I've been seeing the 1UZ very slowly but surely gain more traction (after decades) and I would love to see the aftermarket for this engine grow. On paper, it's one of my favorite engines and I'd love to actually work with it. Can't wait to see this finished project
Thank you! I hope the aftermarket grows too
Quite a common swap into hilux & surf (4runner) down under in Australia & New Zealand. Been done for over 10yrs
I just want the price of cams and rods to go down
From what I know, the 1UZ is actually one of the top JDM V8 engines available too. And if you started with a car that had a stock 1J/2J, you could sell that engine, and have plenty of cash remaining after the cost of the 1UZ to pretty much fund the swap and a few extra goodies too. Solid choice imo.
Thank you!
Great video! I just got my 1uz harness back so almost ready to put in my is300 just need the XAT ar5 transmission goodies before putting the car under the knife. Can't wait for your next video to see how you go about with the install
Thanks! I went with a Spitronics ECU and harness, and all the XAT racing goodies for the engine mounts and bell housing conversion.
@@PoorManModsawesome, can't wait to see it put together and the spitronics sounds like it leaves the door open for supercharger tuning in the future
Had a 99 GS400. Loved the engine in that thing! It was just a boat of a car. I was going to 1uz swap my 85 celica gt-s but ended up selling it before doing it. I also had a IS300. I agree it is lacking in the power department. The 1uz should be an awesome swap. I thought about doing it myself and even watched a bunch of videos about when Chip Foose did the uz swapped IS300 but used the 4.3L. Didn't look too bad and sounded ah-mazing!
Yesssds
@@PoorManMods also I love the "break the mold" outlook. Main reason I prius swapped my 85 mr2. A hair more power, 100lb less, and totally unique!
@@KameleonKustoms yesss that's amazing!
Reliable and charismatic rumble from 32 valve V8. All props to you.
Thank you!
This is why I've kept & absolutely love my 98' gs400, this engine is a gem.
Yesss
Im from the uk. I have a is200/is300. I swap in a 98 1uz. One of the best engines for this chassis. Very handy swap and i love it. These cars should have come with this engine in them.
Love the content keep it up 👍
Thank you!
i'm glad you're doing something different, im currently looking at options to swap my factory manual is300
Hells yeahhh
Love the 1UZ. I wanted to put on into my 240 just couldn’t find something complete at the time. It’s a killer option today because the price for JDM turbo stuff is not as feasible anymore 👍
Yes very trueee
Thanks alot alot alot again and again for this lovely vedio and for explaining the difference between both engines.
I have LS400 96 with 1UZFE Non VVTI, actually the Non vvti is more popular in swap world, I see it in tons of vehicles like BMW , Mercedes , audi and mutch more , even boats and small 4 passengers airplane .
It's less HP then VVTI, but more reliable .
Thanks again .
Thanks!!
My 92 sc averages 23 with mixed driving. And the early 1uz is butter with them beefy rods. Special engine for sure
I'm doing a VH45 swap in my 240, and I feel the same way.
Hells yeah
I had a is300 before and was hoping someone would do a series on this!!! Sold it a while ago but now have just acquired a is300 wagon and really would love to 1uz swap it please do a in depth series for this!!!!!!!
thank you! i have released 5 parts now regarding the swap, its very detailed
Im planning to do this in the future on my is300 as well! need a lot of homework on wiring before that though.
i covered the wiring pretty much step by step for the Spitronics ECU i ran
@@PoorManMods awesome! You the man I was just watching a few minutes in my lunch break but I’ll check the rest out!☺️
@@Thisiskolby :D :D i covered the entire stop pretty much step by step with all the videos i did. Youll have to binge watch them all :p
Dude I love this. I have a 3uz I want to swap into my is 300. Can you brake down what we need to do?
I'll do the best I can
I have an 01 is… I been thinking of this swap too. Please go into detail on the swap. Like exactly is the Clearance done on the fire wall, what factory parts will work. An the most important that no one really specifies. What manifolds to use.
I'll do the best I can
I saw a 1UZ mk3 Supra here in Orlando it’s definitely a sweet sounding motor
Ron from YotaConnectors.com had one with ITBs and it sounds amazing
@@PoorManMods are they Florida based? I think it was a white one i saw. Maybe it’s the same one who knows looked like it got really well though
1UZ into an IS300 just makes so much sense
I’m also looking to make this swap on my IS300 and find another car to swap in the 2JZ
sweeeet
Funny thing is my sc400 came with the 1uz vvti and its pretty quick for a street car it has the torque and the sexy v8 noises how my sc300 has the vvti 2j but u can turbo that or add a nonvvti bottom end on it I've seen people run 35psi on a nonvvti jz with no issues
So excited
Thank you!
0:47 i want to duratec swap an FB for this exact reason.
is it lacking simple stuff like intakes and headers; or is it the more complex stuff like throttle bodies and, valve train stuffs, lightened flywheels, bigger injectors, etc.?
I'm not sure what you are asking?
@@PoorManMods I think he's asking about the accessories and such to actually get it running.
I wanted to LS my '02, but the dang headers are almost what I paid for the car 😡
What about the bell housing and clutch assembly? Can someone get the parts from the pull-it's?
@@PoorManMods...in your video, you mention the 1uz engine lacks support. What type of support? There is enough support to do the swap, but as far as adding power, what is available?
Haven't watched in a minute. But damn you should have more subscribers by now
Nice information
thanks!
I'd love to 1UZ swap a Toyota pickup
Do it!
You're gonna love it 🤘🏼🤘🏼
I knowwww!!!
In my Nissan s13 coupe I have a Vh45de, I've ridden in a s14 with a 1u and i want one. I want to put the 1u in my 87 supra.
Doooo itttt
1 us in a 2012 Jeep Grand Cherokee what do you think trynna get a 500-600 hp for daily use
The 1uz is very reliable and there's some out there that have a million+ miles on them and still running
Yupp!
PS: What transmission are you running with the engine.
Oh yeah, and what upgrades are you doing to the engine.
☝️
✏️✏️✏️
I'm using the W55 manual transmission that's currently in the car, not sure how long it'll last LOL if it breaks I'll goto a W58.
The only performance upgrades I'm doing are Headers and a standalone ECU, then maybe light weight pulley's at some point
@@PoorManMods Wait, but a standalone ECU for a V-8 usually ranges between $1800+ so why the expensive ECU?
@@WelcomeToTheMadness only if you go mainstream plug and play. You can have a speeduino or rusefi ecu for around $200. Make a harness and tune to your hearts content.
Hello ppl. I have a friend who has a 1uz from a 98 GS 400. He is interested in dropping it in to his 95 se 300. Is this possible? The 95 currently has 2jz in it. If this is possible is there any modification needed to consider
Your a real one pmm !
Of course!
@@PoorManMods your channel is truly underrated bro, u make great content keep it up brotha and can’t wait to see the build!
@@dawsonlo6685 thank you so much I really really appreciate it 😁
I’m trying to swap a gs300 for a uz
I have a rs200 3sge, when the motor goes I’ll probably do a 1uz swap
Sweeeeet
Are the 3uz the same weight as 1uz?
Pretty much the same weight
Turbo time
I don't need two of them because I have enough problems.
😂😂😂😂
While I fully understand this sentiment. I think I would like one that's stock.
😆😆
1uz is a heavily underrated engine. Some good headers, a free flowing exhaust, some 12.5:1 pistons, kelford cams, some S65 BMW ITBs, a good aftermarket ECU and you won't need a turbo.
Response on tap whenever you need it, good torque and horsepower and best of all no reliability issues and unnecessary heat.
czcams.com/video/cjnRxo_DbOo/video.html
czcams.com/video/FfJW4WY2qE4/video.html
I'll just be doing headers and a standalone ECU for now. All stock internals
@@PoorManMods RS enthalpy would remap stock VG30 ECUs to run RB25s. Maybe they can remap a 3uz ecu to run your 1uz?
czcams.com/play/PLH5JJBuYzyrPVeSQAbKmP4LJQnjxVVkot.html
i fell you man never rent if ye can help it i have in the past never again i.seems like a great idea vvti heads and a cam regrind that thing will skoot with a tune adding a bit of ignition timing that 1uz vvti will go .i need an extra 2jz na and transmission want to sell it ? got a 280zx with no engine for my mom so ill be doing something As always be blessed
Easier said than done lol
People underestimate these 1uz. They always cry out for thick rod versions which are pretty dire. For not much money you can see 600+whp in these bad boys. I love mine stock. Great choice sir aha
Thank you!!
Really? How so? Are they easy to find if you want that much power?
@@marioandultrachap really easy to come across dude and gaining traction in the community as more people notice how good they are. Ls400 98+ or even the 3uz from the ls430 are great engines. For boosting cheap you can run around 400 on completely stock engine and fab a boost set up by flipping the manifold forward. Theres a good amount of info about them now tbf man. Not sure if that's what you meant about finding them aha. But yeah the auto box zaps a lot of power. So even a manual swap in an is300/200 depending where you are is a good upgrade. Blocks very light. The is200 had a 1gfe which is pretty small and it's still lighter. Worth reading up on man. Easy to swap in a weekend.
@@donfrancis1375
Please send me some links on the 1uz swaps!
Was gonna do the LS 5.3/AR-5 in my '02 IS300. Is there fitment problems with the 1uz headers?
That's the main thing with the LS swap. Headers are almost what I paid for the car!
($1800+!!)
Thanks 👍
@@blownaway4371 I'll have a look through after work dude. Yeah the headers need tapping in slightly around the steering rack but that's it really it's literally a couple blows with a hammer. Think theres a couple vids on YT too about an install on is300 dude. It's a great replacement as it keeps the body balanced well too being so light. I think wet it's around 174kg
I'm shocked I literally thought it was heavier because it was a V8 I stand corrected I guess it ain't a bad idea after all.. but I do want more power than 100hp extra lol. Unless you can turbo the 1uz lol
More power and less weight, the car will be almost perfectly balanced and drive amazing
What do you think would be a good swap for the es 300
Swapping to a different car if you want performance
ES300 is basically a fancy camry. FWD and all. It has the 1mzfe engine. Possible swaps include, but not limited to, 3sgte (I'd suggest a gen5 version if you want easy drop in power), there is a rare 1mzfe supercharger kit, a 2arfe from a modern camry/scion tc would give you similar power but a lot less weight. There are a lot more options, just depends on how deep down the rabbit hole you want to go.
Who the hell would hate on a MK3?
A lot of people especially 10 years ago
You sure you want to do that? Your car is probably worth alot stock factory manual. They have been selling for crazy prices. I would do it to a cheap auto is and convert it.
A 1uz is significantly lighter than a 2JZ engine. Much more than 100 lb.
sexual v8 noises 😂
I wanna 3uz swap my is300
Gs30*