Thank you so much for this vid. I installed a new AC unit about 2 months ago, but it would not blow cold or hot air. After going through youtube videos after videos and purchasing a vacuum machine along with all the bits and pieces such as cables and refrigerant (Believe me, "R32" is hard to come by in Europe!) I still could not get the Unit working. The extras I purchased didn't come cheap either and added at least another 200 euros onto the overall cost. However, after getting ready to give up with a total sad on... I came across this video and followed it step by step. (I luckily had a full bottle of R32) Best video by far. Again, thank you.
super video bro....excellent efforts that you have put in making this wonderful and informative video....it can be understood even by a novice like me...these allegedly AC technicians are burning my pockets every summer and they don't even explain what they did but they charge money stating that they have filled the gas.....now i got a clear picture....thanks a million for such a lovely video....good luck to you...
My name is Dian Pelangi from Jakarta in Indonesia, I am a fashion designer and I want to use this media to tell everyone to be careful about getting loans on the internet, so many lenders here are fraudsters and they are here. tricking you with your hard-earned money, I applied for a loan for around Rp900,000,000 women in Malaysia and I lost around 29 million without taking a loan, I paid almost 29 million still I didn't get a loan and my business was about crashing because of debt. When I searched for a reliable private loan company, I saw another online advertisement and the name of the company was THE WORLD LOAN COMPANY. I lost 15 million with them and to this day, I have never received the loan I proposed. Dear God, my friends who applied for loans also received the loans, introducing me to a trustworthy company where Mrs. Christabel worked as a branch manager, and I applied for a loan of Rp900,000,000 and they asked for my credentials, and after that they finished verifying my details, the loan was approved for me and I thought it was just a joke, and maybe this was one of the cheats that made I lost money, but I was stunned. When I get my loan in less than 6 hours with a low interest rate of 2% without collateral I am very happy that God used my friend who contacted them and introduced me to them and because I survived making my business soar high in the air and liquidated and now my business is flying high in Indonesia and no one will say it. know about fashion companies. So I suggest all people who live in Indonesia and other countries who need loans for one purpose or another to contact christabel mother via email: christabelloancompany@gmail.com You can also contact me at my email: (lianmeylady@gmail.com) and Sety introduces and talks about christabel, she also gets a new loan from christabel, you can also contact her via her email: permatabudiwati@gmail.com Now, all who will I do is try to fulfill loan payments that I send directly to their account every month. A word for wise men is enough Thank you once again for reading my testimony, and may the Lord continue to bless us and give us a long life and a prosperous life and may God do the same good work in your life. Good mother Christabel Missan What'sApp number +15614916019
I watch your videos becouse i own same car (Kia) as you. And i find this video and i must say you are real pro. Becouse i work with AC units and the way how you can repair nearly everything and use old parts to helps you to succes is outstanding. So i wish you good luck ! Little advice, some refrigerants can be flammable and explosive so you cant always use your old compressor for make vaacum. GL
Hi, you did a very informative video for such a DIY process. I want to make my own pressure and vacuum motor as what you did using the refrigerator motor. 1) is there any specific capacity for that motor to use to pressurize and vacuum my 2 tons split AC? 2) I saw the motor has "T" handle on the top. Did you weld it as it is or you separated the tank first since I also noticed that there is welding around the middle of the tank motor. Thanks buddy.
Thank you and sorry for late- for first question the motors name is (Danfus) from Denmark and about the capacity i am not sure and for second question yes i welding the (T) hand without open the compresor
Hi, I really like your video. I do have some doubts, if you able to help me with the same it will more helpful for me. 1) Is it necessary to put the gas cylinder upside-down while charging the gas? 2) I do have 1.5 ton LG window ac and the amp reading is like started with10-12 and goes upto 20-22. To cross-check I have changed the capacitor but it still the same. The amp mentioned in my ac is 8.5. I just wanted to know that is it okay or there is any kind of fault? 3) The ac is not dripping water. I mean the pressure is 64. It creates the cooling effect but not upto the point. It make water a bit in the condenser coil but not dripping. At the same place there is another ac which is dripping water like hell... I am waiting for your reply and thanks in advance.
What if I just want to drain moisture, check for leaks with vaccuum and then recharge air back from working split? Without discharging all air into the atmosphere but just vaccum test, them put the sucked air back into split?
why didn't you vacuum the middle (yellow) pipe also? if you did, you didn't have to purge it with gas. Vacuming does a better job and its also not eco unfriendly. At the end, why didn't you first close the valve with the allen wrench before unscrewing the blue pipe, so no gas would go out.. I am still learning so I want to know the right way to do this..
+Ivan Rimac Thank you Good question Answer first question The yellow tube i vacuum it at 1:30 to 3:15, but when i disconnect the yellow tube from the compressor, and connected to bottle that it refill the air again
+Ivan Rimac For the second question i close the valve or not the freon came out because when i close the valve it cut between the yellow tube and the outdoor unet.not cut the way between the indoor unet and the yellow so its useless to close it
I need some info here, i saw my outdoor unit high pressure pipe is freeze with ice when I on my ac and the ac indoor unit air is not cold, the compressor fan is turning , i guess the compressor is running as well as my watts meter shows 750watts. What possible wrong ? In what circumstances we need to use vacuum for topping R22 ? Hope cannhear reply from you soon. Thnks.
Hi, I have a question: If I take a fully loaded 30 lb, i.e. 13.6 kg, R22 cylinder and open the valve of the cylinder almost all the way without turning the cylinder upside down, how long will it take to release gas on average?
Interesting, when the unit is in low in refrigerant in winter time. But dunno the technical side of it when removing the valve wires on the caps. Further details perhaps? Thanks!
+Arnel Angeles When the valves wire is removed on the capasitor in this case, the cycle of the Freon (R22) is reversed, and the hot air becomes cold. The result is that the tube that is connected with the gage is converted from push to pull and thus you can withdraw the freon (R22) from the bottle .welcome
thank you for sharing your knowledge with the us... and the world. may you prosper and become more of an expert in HVAC and split aircons. I just bought a 24,000 BTU Senville and will install it myself. Be well my friend.
Hi there, I have an old type just like your, just I open the valve at the side before doing anything? I have Been trying to refill but it will stay at 150psi and won't budge and let in any gas. I have no idea how to let all the gas out from the Aircond. When you refill do you need to turn off the valve at the side to prevent the gas from leaking out???
Hello, I have an inverter 2.5hp AC using R410A, it is 4-6 years old AC. I just finished vacuum and recharge the refrigerant, When i reach 110psi, the compressor amp is over 9.6 amp, and it is loud. The max amp labeled at the back said max amp : 8.5amp. should I continue adding refrigerant to 120-130 or reduce it below 110psi to follow the same max.amp? Thank you.
sir I having 1ton split AC. the gas level is 35psi . & also ice is forming in indoor copper tubes through small copper tube from outdoor . 1) can u analyse the problem. 2) technician said that he need to full whole gas up to 65psi(R-22). before that remaining 35psi(R-22) gas will be vacuumed completely is the process is correct ? 3) or we can able to top-up gas from 35 to 65 psi? 4) is there any chance to having hole in condenser coil . because I having aluminum condenser coil. or it will be minor valve joint leakage.? 5) because at last I not lose the hole gas nearly 50% gas there. Plz Reply me fast it will be helpful....
Well I will try to help you but step by step 1. You said there 35 psi and this means that there is a leakage of gas and easy recovery. Find a spot of oil that is blocked from Split. And when it is found, the leak will be inside this spot
You dont depend for charging freon 55 or 60 you should check first the running fullload amps of your compressor, not only for charging freon you must balance the charging and amps to proper charging to save any fault
Of all my years in installing/repairing AC units, I didn't have any issues or back-jobs in constantly charging 60psi for R22. And most of those process, I didn't even use AmpMeter. So, this video is 100% reliable for any R22 AC Units!
No need. It is a single component refrigerant "Chlorodifluoromethane" and not a blend. You only need to invert the tank if the refrigerant is a blend (ie, mixture of 2 or more gases such as R410). All R400 & R500 series refrigerants are blends.
@@zana3587 , then how it is that the gas doesn't goes out if you did not close on the charging side valve, unless you got schrader valve installed in it.
Excellent video and description. I have a 1998 Mitsubishi split system 2.5 kw,, it is now 22 years old and still working,,, I have shifted the unit a few times, and lost some R22. My 5 kg bottle is empty and I cannot purchase more R22 because I am not licensed. All cooking gas in Aus is pure propane, so what I have done: purged the lives with propane, tightened the connection and the job done in 5 minutes. The amount op propane which escapes is less than opening for the gas cooking stove before igniting also same for my gas hot water system. I am about to install an new 2.5 kw split system with the new gas R32 which is compatible with R290 which I believe is pure propane (though I am not 100 % sure about that), but it is propane nonetheless, and I will use same procedure. I have pump and gauges,,, but why bother, purge the lines with propane.
Hi buddy...i was maintenancing my minisplit condenser and also recharge refrigerant r22a...as I watched the manifolds it read 45/50 PSI...the charge port had "Ice" I filled the r22a but the charge didnt reach the 60 PSI when working on 16º evaporator...what was I doing wrong???
This is a very good video. Please my question is I added refrigerant to my 1hp Samsung spit AC when the power was turned off and I waited 10 hours to put the power on. Is it okay?
He will get the fine sooner or later lol. I'm just puzzled with the fact he filled the unit with air rather than nitrogen... air is a non condensible and it doesnt belong in the unit. I hope I just missed something in the video.
hi my compressor's already mixed up with air. I want to refill the gas. I have vaccum to suck the air out. But, isn't vaccuming will suck the oil from the compressor? or it will suck the air only?
Excellent video. Can u pls show us how u made the vacuum pump from old compressor. Also, why u pressurized the indoor condincer upto 340psi for leak test? is the condincer designed for such high pressure? Thank you
Hi I have seen many videos of how to service air out door unit and could not catch upwith any ,but your clip can turn a zero to hero , Thanks i leanrt a lot from this .hope to see more clips on fridge service .. tks friend
sir i have a question. why is it after turning on, the cooling coil doesnt become fully cold. there are 3 parts of the coil. only the front one is cold. whereas the top and middle one isn't. ??
Thank you for this enlighting video. In it I saw step by step how the process should be done. I' m having a problem with a technician that is so stupid, I don't know, he left the valves open and air went into the compressor. Now I have another technician and he started filling freon gas without creating vacuum. It took a long time to fill a small amount and inside it's not cooling at all. What is happening. Is the vacuum step necessary?? And one more thing, 15 min after I start my AC it give E4 error on its screen. Please help.
lol, most of them dont know anything, u have to go around city for good tec person, in that time they will spoil ur ac , it sometimes better to get new one.
Thank you so much for this vid. I installed a new AC unit about 2 months ago, but it would not blow cold or hot air. After going through youtube videos after videos and purchasing a vacuum machine along with all the bits and pieces such as cables and refrigerant (Believe me, "R32" is hard to come by in Europe!) I still could not get the Unit working. The extras I purchased didn't come cheap either and added at least another 200 euros onto the overall cost. However, after getting ready to give up with a total sad on... I came across this video and followed it step by step. (I luckily had a full bottle of R32) Best video by far. Again, thank you.
thank you sir i hope it's helpful for you
how I know that the pipes has air .
How many bar did u needed with r32
Q1u
This will be very beneficial for us during this pandemic to DIY our AC repairs. Very good job, man.
Thank you sir
Thank you! I love that you show the point and not mystify it. Good work!
Bu bu haftaBu y bu bu t hu,a
One of best AC servicing video on CZcams. You are very good at what you do. 👍👍
thank you sir
nice job. thanks for painstakingly making the video and posting it online for the benefit of others.
Thank you very much sorry for the late response
Are the pressure values with r32 the same ?
CZcams.com/c/aaziztechnical
plz visit and subscribe a aziz technical CZcams channel for HVAC and home appliances repairing video thanks ♥️
@@elektroniknissanx-trailrog2641 no they are completely different and even the pressures he gave for 22 are too low, 70 psig would work better for 22.
Thankyou nice job
super video bro....excellent efforts that you have put in making this wonderful and informative video....it can be understood even by a novice like me...these allegedly AC technicians are burning my pockets every summer and they don't even explain what they did but they charge money stating that they have filled the gas.....now i got a clear picture....thanks a million for such a lovely video....good luck to you...
Thank you sir, i hope it's helpful for you
You made our life easy. You are honest and sincere person. Thank you so much and God bless you
Hvala za čudovit prikaz.Thank you very much,great video!
hvala gospod, upam, da vam bo v pomoč
Straight to the point, thank you so very much!
thank you sir
Brother, your video was smarter and more helpful, with no words, than 50 videos I watched, of my American brothers, endlessly talking BS.
Thank you.
Jayesh pandya Rajkot
Sangita Pandya
What language is that? I couldn’t translate it on google.
Well he did a shit job so I'd have to disagree
thank you
excelente video muchas gracias por fin pude entender cómo se carga de gas el aire acondicionado saludos desde República Dominicana
bienvenido señor
no,good,you,fixce
Thank you, Dahen. Yours is the best video for pure instruction....greatly appreciated!
Thank you there are more videos about (how to test the capacitor, how to close the air ( R22) by close the valve and more ....) soon
Best video ever!! Quick and easy. Thanks.
nef003 You welcome
Thank you very much, may God bless you, and I wish you continued health, progress and brilliance
thank you sir i hope it's helpful for you
Fabulous information
Thank you sir
My name is Dian Pelangi from Jakarta in Indonesia, I am a fashion designer and I want to use this media to tell everyone to be careful about getting loans on the internet, so many lenders here are fraudsters and they are here. tricking you with your hard-earned money, I applied for a loan for around Rp900,000,000 women in Malaysia and I lost around 29 million without taking a loan, I paid almost 29 million still I didn't get a loan and my business was about crashing because of debt.
When I searched for a reliable private loan company, I saw another online advertisement and the name of the company was THE WORLD LOAN COMPANY. I lost 15 million with them and to this day, I have never received the loan I proposed.
Dear God, my friends who applied for loans also received the loans, introducing me to a trustworthy company where Mrs. Christabel worked as a branch manager, and I applied for a loan of Rp900,000,000 and they asked for my credentials, and after that they finished verifying my details, the loan was approved for me and I thought it was just a joke, and maybe this was one of the cheats that made I lost money, but I was stunned. When I get my loan in less than 6 hours with a low interest rate of 2% without collateral
I am very happy that God used my friend who contacted them and introduced me to them and because I survived making my business soar high in the air and liquidated and now my business is flying high in Indonesia and no one will say it. know about fashion companies.
So I suggest all people who live in Indonesia and other countries who need loans for one purpose or another to contact
christabel mother via email: christabelloancompany@gmail.com
You can also contact me at my email: (lianmeylady@gmail.com) and Sety introduces and talks about christabel, she also gets a new loan from christabel, you can also contact her via her email: permatabudiwati@gmail.com Now, all who will I do is try to fulfill loan payments that I send directly to their account every month.
A word for wise men is enough
Thank you once again for reading my testimony, and may the Lord continue to bless us and give us a long life and a prosperous life and may God do the same good work in your life.
Good mother Christabel Missan What'sApp number +15614916019
Dahen Zana, many thanks. Thorough and very well done.
Thank you
I watch your videos becouse i own same car (Kia) as you. And i find this video and i must say you are real pro. Becouse i work with AC units and the way how you can repair nearly everything and use old parts to helps you to succes is outstanding. So i wish you good luck ! Little advice, some refrigerants can be flammable and explosive so you cant always use your old compressor for make vaacum. GL
thanks for the video. did you close back both valves after recharging and putting caps back on? missed that part. thanks again.
Thank you, you should not close both valves
good observation my good engineer, because of this i watch the video 3 times , good study er
@@zana3587 meaning both valves shld remain open always?
Yes sir . Sorry for late
@@zana3587 thanks for your reply sir
wonderfull training, i appreciate your teaching please ,more video about a/c conditional am biginner....GOD BLESS YOU
thank you
Would the work flow or measurements be different using R32 instead of R22 ?
Hi, you did a very informative video for such a DIY process. I want to make my own pressure and vacuum motor as what you did using the refrigerator motor. 1) is there any specific capacity for that motor to use to pressurize and vacuum my 2 tons split AC? 2) I saw the motor has "T" handle on the top. Did you weld it as it is or you separated the tank first since I also noticed that there is welding around the middle of the tank motor. Thanks buddy.
Thank you and sorry for late- for first question the motors name is (Danfus) from Denmark and about the capacity i am not sure and for second question yes i welding the (T) hand without open the compresor
Bsbsvxv
Thanks for demo,so easy so fast.
thank you sir
Hi, I really like your video. I do have some doubts, if you able to help me with the same it will more helpful for me. 1) Is it necessary to put the gas cylinder upside-down while charging the gas? 2) I do have 1.5 ton LG window ac and the amp reading is like started with10-12 and goes upto 20-22. To cross-check I have changed the capacitor but it still the same. The amp mentioned in my ac is 8.5. I just wanted to know that is it okay or there is any kind of fault? 3) The ac is not dripping water. I mean the pressure is 64. It creates the cooling effect but not upto the point. It make water a bit in the condenser coil but not dripping. At the same place there is another ac which is dripping water like hell...
I am waiting for your reply and thanks in advance.
Well I will try to help you step by step
First do not put it upside-down
all air conditioner (indoor or outdoor) written on sticker (run amp and start amp)
What is the value of the capacitor you set ?
did you say 65 psi in your air conditioner ?
What if I just want to drain moisture, check for leaks with vaccuum and then recharge air back from working split? Without discharging all air into the atmosphere but just vaccum test, them put the sucked air back into split?
Verry good and informative with out all the talk talk talk Thanks Chris Schmidt
Thank you sir
why didn't you vacuum the middle (yellow) pipe also? if you did, you didn't have to purge it with gas. Vacuming does a better job and its also not eco unfriendly.
At the end, why didn't you first close the valve with the allen wrench before unscrewing the blue pipe, so no gas would go out..
I am still learning so I want to know the right way to do this..
+Ivan Rimac Thank you Good question Answer first question The yellow tube i vacuum it at 1:30 to 3:15, but when i disconnect the yellow tube from the compressor, and connected to bottle that it refill the air again
+Ivan Rimac For the second question i close the valve or not the freon came out because when i close the valve it cut between the yellow tube and the outdoor unet.not cut the way between the indoor unet and the yellow so its useless to close it
@@zana3587 this answer doesnt make sense sir, please explain better how the valves work.
very nice information thank u so much
+S.P. SIVAN welcome man
I need some info here, i saw my outdoor unit high pressure pipe is freeze with ice when I on my ac and the ac indoor unit air is not cold, the compressor fan is turning , i guess the compressor is running as well as my watts meter shows 750watts. What possible wrong ? In what circumstances we need to use vacuum for topping R22 ? Hope cannhear reply from you soon. Thnks.
Hi, I have a question: If I take a fully loaded 30 lb, i.e. 13.6 kg, R22 cylinder and open the valve of the cylinder almost all the way without turning the cylinder upside down, how long will it take to release gas on average?
I really love this
thank you
Interesting, when the unit is in low in refrigerant in winter time. But dunno the technical side of it when removing the valve wires on the caps. Further details perhaps? Thanks!
+Arnel Angeles When the valves wire is removed on the capasitor in this case, the cycle of the Freon (R22) is reversed, and the hot air becomes cold. The result is that the tube that is connected with the gage is converted from push to pull and thus you can withdraw the freon (R22) from the bottle .welcome
dahen zana I can see your logic behind it in blowing hot to cold.
Sorry for the delay in the answer - in the winter can not run the air conditioner in the cool mode because the compressor not start in the cool mode
thank you for sharing your knowledge with the us... and the world. may you prosper and become more of an expert in HVAC and split aircons. I just bought a 24,000 BTU Senville and will install it myself. Be well my friend.
Thank you
Mulțumesc Seara frumoasa
Very instructive.
Thank you
Do the valves where you removed the knuts from stay open even when you were done with the rifrigerent refill??
yes sir
yes u have to keep that open so refrigerant can cycle
Exellent teaching I just followed yr Instructions and reload refrigerant r22 to my minisplit unit thanks...
thank you sir
@@zana3587 Amigo como ago barrido de mangueras de manometros nesesito revisar presion de gas minisplit R410a inverter
Hi there, I have an old type just like your, just I open the valve at the side before doing anything? I have Been trying to refill but it will stay at 150psi and won't budge and let in any gas. I have no idea how to let all the gas out from the Aircond. When you refill do you need to turn off the valve at the side to prevent the gas from leaking out???
Can you make one R32?
maybe in the future
Nice video
Rinku RAJPUT Thank you
Danke! genau was ich gesucht habe.
Sie sind willkommen, Sir. alle deutsch
Was the valve turned off with the allen keys , feel like i missed that part
Yes
You said to find the leak you should charging the system with air until 460 PSI. This is very excessive pressure and could destroy the system.
I did not have another solution. Because it was a very small leak and I could not find it. But when arrived 460 psi . i saw bubbles
200 max with nitrogen it's basic stuff
You also probably a didn't see the leak because you caused it a 460 psi
You are wrong
Not air..nitrogen is the right gas, which recommended to use when performing refrigerant leak test.
Nice
Thank you
Hello, I have an inverter 2.5hp AC using R410A, it is 4-6 years old AC. I just finished vacuum and recharge the refrigerant,
When i reach 110psi, the compressor amp is over 9.6 amp, and it is loud. The max amp labeled at the back said max amp : 8.5amp. should I continue adding refrigerant to 120-130 or reduce it below 110psi to follow the same max.amp? Thank you.
You opened the valves in the beginning with allen key, but not at the end- why?
Could you refill gas without vacuuming, first?
Nice vdieo
+Mohd Riyaz Thank you
Nice video me too !
Iqbal Halani welcome
Mohd Riyaz ygcjvkm
hanhphuccorp.com/du-an/tai-sao-may-lanh-khong-lanh--213.html
sir I having 1ton split AC. the gas level is 35psi . & also ice is forming in indoor copper tubes through small copper tube from outdoor .
1) can u analyse the problem.
2) technician said that he need to full whole gas up to 65psi(R-22). before that remaining 35psi(R-22) gas will be vacuumed completely is the process is correct ?
3) or we can able to top-up gas from 35 to 65 psi?
4) is there any chance to having hole in condenser coil . because I having aluminum condenser coil. or it will be minor valve joint leakage.?
5) because at last I not lose the hole gas nearly 50% gas there.
Plz Reply me fast it will be helpful....
Well I will try to help you but step by step 1. You said there 35 psi and this means that there is a leakage of gas and easy recovery. Find a spot of oil that is blocked from Split. And when it is found, the leak will be inside this spot
After repairing the hole, vacuum the air as you did in the video
Can you explain more 4. I did not understand?
sir can i topup the gas level
or I should completely vacuum out & refill?
4) I typed as that there is any chance leakage in joints & valves?
круто! ни одного слова! а всё понятно! спасибо!попробую снимать так же!
Спасибо, сэр
Saludos de TodoFrigorista 👍 Argentina
You dont depend for charging freon 55 or 60 you should check first the running fullload amps of your compressor, not only for charging freon you must balance the charging and amps to proper charging to save any fault
You can not depend on an amp because the compressor and other compressor are different, especially the bad-made compressor need more amp
inverter almost connot detect the amper
Of all my years in installing/repairing AC units, I didn't have any issues or back-jobs in constantly charging 60psi for R22. And most of those process, I didn't even use AmpMeter. So, this video is 100% reliable for any R22 AC Units!
Thank you sar
thank you
What is the proper suction pressure of R32 1.5 ton unit?
At the end, does the valves stay open?
the gas r22 must be revers when you charge it
You mean the bottle?
@@zana3587 yes
@@zana3587 ...
Why should it be in reverse position?
No need. It is a single component refrigerant "Chlorodifluoromethane" and not a blend. You only need to invert the tank if the refrigerant is a blend (ie, mixture of 2 or more gases such as R410). All R400 & R500 series refrigerants are blends.
nice
Ranajit Bhunia Thank you
Compressor oil need to be refill or not after vacuum?
*Hi, I'm from Vietnam, I also work in refrigeration, I'm happy to get to know you and everyone, wish you and everyone always luck and success*
Thank you sir
Are you online
Very.sir.
thank you
Don't you have to close the valves?
Thank you sir, and sorry for late. No sir
Why not?
If you close the valve, you close the system gas
@@zana3587 , then how it is that the gas doesn't goes out if you did not close on the charging side valve, unless you got schrader valve installed in it.
@@edward1394ablemy question exactly. Did you get an answer?
Thank you for sharing,I hope this video can give me a bit knowledge as benefits.
I have one question bro , u r open time use Allen key and loose the screws . After finishing Time no need to tight????
Set vacum is wrong.must do by special set vacum
What is the wrong?!
@@zana3587 a lot is wrong with how this was done
ok
ok
Excellent video and description. I have a 1998 Mitsubishi split system 2.5 kw,, it is now 22 years old and still working,,, I have shifted the unit a few times, and lost some R22. My 5 kg bottle is empty and I cannot purchase more R22 because I am not licensed. All cooking gas in Aus is pure propane, so what I have done: purged the lives with propane, tightened the connection and the job done in 5 minutes. The amount op propane which escapes is less than opening for the gas cooking stove before igniting also same for my gas hot water system. I am about to install an new 2.5 kw split system with the new gas R32 which is compatible with R290 which I believe is pure propane (though I am not 100 % sure about that), but it is propane nonetheless, and I will use same procedure. I have pump and gauges,,, but why bother, purge the lines with propane.
thank you sir
R32 is most definitely NOT compatible with propane.
R290 is propane
R32 is difluoromethane
Not even close to similar, or compatible
Vry good
Hi buddy...i was maintenancing my minisplit condenser and also recharge refrigerant r22a...as I watched the manifolds it read 45/50 PSI...the charge port had "Ice" I filled the r22a but the charge didnt reach the 60 PSI when working on 16º evaporator...what was I doing wrong???
Ola amigo qual e o compresso que vc usa para fazer o vacua deste agradeco
After recharging r22 to the correct psi, I removed the hose from low suction nipple. Many times there's oil dripping from the hose. Is this normal?
Perfect and professional way of work as well as well explained....
Hats off brother
Thank you sir
More like half assed and amateur, I'd fire a tech if they did this
@@larrynutt1581 you want to make it complicated that people ask you to do it for big money....
@@klausschumacher7126 it has to be complicated because that's the law
This is a very good video. Please my question is I added refrigerant to my 1hp Samsung spit AC when the power was turned off and I waited 10 hours to put the power on. Is it okay?
lesve the valves front seated? then close?
Thats excactly what i need, THX a lot...👍
Thanks, But how often does it have to be refilled??
Thanks for venting!
Thank you
He will get the fine sooner or later lol.
I'm just puzzled with the fact he filled the unit with air rather than nitrogen... air is a non condensible and it doesnt belong in the unit. I hope I just missed something in the video.
@@michaelgalvin9994 I like how he purged the hose then turned off the gas before tightening the hose completely negating the purge
Does this require the ac in a on state?
hi my compressor's already mixed up with air. I want to refill the gas. I have vaccum to suck the air out. But, isn't vaccuming will suck the oil from the compressor? or it will suck the air only?
This very nice continue thank you for that
thank you
Great video....it has helped me alot...thanks
Thank you sir
Hi sir
Awesome video,very clear and easy to understand,keep doing these videos as it helps all of us.
From south africa
thank you sir i hope it's helpful for you, great to south africa
BRAVO, regards and THANK YOU
Thank you sir
Excellent video. Can u pls show us how u made the vacuum pump from old compressor. Also, why u pressurized the indoor condincer upto 340psi for leak test? is the condincer designed for such high pressure? Thank you
There was a leak and it was hidden
indoor unit or evaporator is the right term sir
thank you ..
that was so usefull
In what year you did this? It look like this happened in the 60's, 70's.
Спасибо, ты лучший коротко и всё понятно. Thanks a lot. You best, GOOD JOB. Russia.
Спасибо, сэр
That's knowledgeable! Have you close the valve when removing blue house, plz tell us?
My question exactly withiut a proper answer. 😢
Hi I have seen many videos of how to service air out door unit and could not catch upwith any ,but your clip can turn a zero to hero , Thanks i leanrt a lot from this .hope to see more clips on fridge service .. tks friend
Thank you . There is more to come
Hi Dahen Zana , thanks for the swift reply , Do you have notes about the aircon servicing .
welcome . I have another video about test air conditioner capacitor
Nice. One question. At what moment you close the valves? Wasnt shown on the video. After filling with 55lbs of Freon??
you must not close any valves, both valves must open after refilling
Dahen Zana ok. Thanks. Then why valves were closed before he started refilling the a/c? Just asking for knowledge.
This is my question also.
Great very informative video.
thank you sir . sorry for late
Boss what is the brand this until
Can we ask boss What gas we use General brand?
Do you turn on the outdoor unit while filling the AC outdoors?
yes sir
This is very helpful to me my is low on refrigerant
Good video thank you.
Thank you sir
It's awesome. Thank you bro.
thank you sir
CZcams.com/c/aaziztechnical
plz visit and subscribe a aziz technical CZcams channel for HVAC and home appliances repairing video thanks ♥️
Wow - you are the man, thank you a lot - easy, specific, pragmatic - the way I like!
Best video for mini split refill!
thank you
At the beginning you opened the allen key valves, and at the end you just put caps on them, did not close? Why were they closed?
it must not close sir
sir i have a question. why is it after turning on, the cooling coil doesnt become fully cold. there are 3 parts of the coil. only the front one is cold. whereas the top and middle one isn't. ??
You must give the gas with scales. The pressure can fool you. The pressure varies according to the air temperature. Greetings from Turkey 🇹🇷
Beğenin la
Thank you for your information
AC compressor use it as a vacuum pump we used to use them to blow up bike tires back in the old days
Good work
good information for beginners and still required demo bith more technical details and sequence...Thank you
+Sridhar K welcome
Thank you for this enlighting video. In it I saw step by step how the process should be done.
I' m having a problem with a technician that is so stupid, I don't know, he left the valves open and air went into the compressor. Now I have another technician and he started filling freon gas without creating vacuum. It took a long time to fill a small amount and inside it's not cooling at all. What is happening. Is the vacuum step necessary??
And one more thing, 15 min after I start my AC it give E4 error on its screen.
Please help.
thank you sir . the vacuum step very necessary . i don't know about E4
lol, most of them dont know anything, u have to go around city for good tec person, in that time they will spoil ur ac , it sometimes better to get new one.
Does 60 mark apply to all sizes? I.e 12000,18000 and 24000btu