How To Silver Leaf On A Car, At Least What I Have Learned So Far
Vložit
- čas přidán 7. 01. 2022
- Its A Long Video But I Wanted To Do A In Depth Video On Applying Leafing To A Car
Thanks To Fonzo Pinstriping & Leafing For The Thumbnail Art And All The Help Over The Years
Hollow Punch To Make Spinning Pads
amzn.to/3wpBYED
Keep bringing us info, greatly appreciated. You don't know how great it is to have someone like you show us how to do our own thing on our fleetwood's. Especially Lowrider's , thanks Dan your the Man!!✌️
Thanks! sorry for the late reply sometimes all the comments dont show up in notifications
A little suggestion is I gold leaf the area and then I apply a second coat to make sure there are no cracks or pin holes... I let it dry a couple days and then spin/buff the leaf. Also there is a guy in England who works from home that is magic for free.
He's called the "Happy Gilder" on CZcams ... he does great work. I've been pin stripping since the 60's and the old saying was if you are learning to pin stripe, you are definitely going to F**K up ... same goes for gold leaf... "Do what you love and Love what you do" ... that's all that matters.
Thanks for the tip I will definitely try it out
Nice! Thank for the vid!💪🏾💪🏾💪🏾
thanks for this video, youre a gentleman and a scholar
Thanks!
Great video thank you for sharing that information with us
thanks bro for all the info i changed all the wiring and switch panel everything is good now thanks again bro now im on the leaf video
Good to hear
WE CAN DO IT! THANKS BIG DOG! 😷🇲🇽💪🏽👏🏼👍🏼🙏🏼
Deebs and his cool colllar!!!
Good job buddy. The only thing I’d tell ya to do differently is before you brush off the excess leaf, 1st use a rubber coated roller to roll over the leaf really good. I think it’ll definitely help that leaf bond to the glue a lot better n avoid the holidays
I had picked one up since then it definitely helps that's a good tip
Here is where I got to put what I learned to a actual project
czcams.com/video/kXshJ5QOYAk/video.htmlsi=NWIn4K7Lg8ZnvQ1R
U got this Dan!
I’m also a airbrush artist whenever u need anything we can swap work bro thanks Dan one day will meet talk lowrider life!
You can dooooo it!!
Man u had me waiting 😂
If u cant find velvet to do the turn on the leafin, use 5000 grit sand paper...its a got a foam backing...get it at ur local autoparts store...i use it and it works better than velvet...i trim it to the size of a quarter and use a little hlue on my thumb and get t tacky so the foam sticks to my thumb...and away u go
They say use k5000. Not the other, is it l or p
Im having trouble with the spinning also,it burns thru maybe i do it too soon idk but thanks for the video...(new follower)..✌✌
Yeah you are probably applying the leaf to soon I make a few test strips on a test panel so I know when the size has set up enough to not burn through
Good job bud 👍
Thanks it's been a long time coming
@@thecadillacdanshow8658 where do you order all the materials for it?
👍🏼
Have you checked out time warp custom paint here on you tube
Yeah I came across his channel a few weeks ago i love it
What kind of hole
Cutter you use ..:I’ve been looking down days
I added a link in the video description for the tool on Amazon
What up I came to a conclusion to snatch out the old wire and switch panel and put in a new one it was still having power with nothing connected just touched the ground and the solenoid for the back was clicking
Unhook the wires from you back switches with your motors disconnect and ground hooked up touch each of your switch wires to the switches and listen for a solenoid to click when it does that's where your problem is
@@thecadillacdanshow8658 yea I just bought a new switch panel and with a all new prewired switch panel for 4 switches instead of 6
So it probly have a short in the old cable some were I didn’t want to have no fire so I just replaced it all so it should be good I’ll let you know Fosho
Gm bro I changed my switch I got 8 batteries 4 solenoids to the front and 3 to the back I changed everything and now the ground is arching when I try to put it together
Something is shorted out or stuck do any of the motors spin? How big of a arc is it?
@@thecadillacdanshow8658 that shit damn near blinded me so I changed all the solenoids again and got another switch and it’s still arching I will try taking the motor out to the back and check again
@@thecadillacdanshow8658 yes I tapped the switch and it arched again
@@camefromnuthin6994 I would get a volt meter and use the continuity setting and see if somthing is grounded out if everything looks good try unhooking the wire from your solenoids to the pumps then check if you are getting power through your solenoids. The switch wire could have a short in it sending power to one bank of solinoinds
@@thecadillacdanshow8658 ok I will check it it’s crazy it didn’t start arching until I changed the switch soon as I changed it and tapped it it got stuck the motor was spinning I snatched the ground off
heyyyy
What's up
@@thecadillacdanshow8658 me and my dad is sick…what’s up with u
@@_shiannegolden sorry to hear that I hope you guys get better soon
@@thecadillacdanshow8658 thx
@@thecadillacdanshow8658 we all got rona
111 likes
Dang!