Ender 3 V3 KE 3D Printer Review and Test
Vložit
- čas přidán 6. 01. 2024
- This is the Best New 3D Printer The Creality Ender 3 V3 KE Printer
Amazon Store: www.amazon.com/shop/deuceandguns
Facebook: / deuceandguns
If you enjoyed this video please give it a like and be sure to subscribe I put up a new video every week here at Deuce and Guns.
#ender3 #3dprinting #new - Zábava
![[柴犬ASMR]曼玉Manyu&小白Bai 毛发护理Spa asmr](http://i.ytimg.com/vi/0TsXQ7z2Dh4/mqdefault.jpg)
Ender 3 V3 SE - Best Budget Model - amzn.to/3vobrdo
Ender 3 V3 KE - What I got - amzn.to/3NUhcWi
Favorite Filament - ESun - amzn.to/3TT6zXI Polymaker - amzn.to/3S8ox7b
My Taco holster - www.thingiverse.com/thing:5534058
Jet Star's Taco Mag - www.thingiverse.com/thing:6398307?fbclid=IwAR1-FpXF1yj65-nb9v14AX8RHeKlWf-CuvfYnYpbIm70OVEo842K24KLIx0
I'm a 74 yr old retired guy and I got the SE as a Christmas present. Never had a 3d printer before, I just put it together per the booklet sent and a couple of YT vids. Its been printing everyday since making kid toys I found on thing averse. Prints very well on pla+ and pla silk by sunlu. Only problems was finding the optimal temps and I had a hard time getting the prints to release from the stock build plate. I bought the PEI plate and now all is well. I believe 3d printing for the masses is here!
You get a ton of printer for the money with that SE model which is why I recommend that for first time owner. Glad to hear you're having a good experience.
Thing averse? Do they hate things over there?
@@DatHondaBoi223 dam smell check.
I just got this exact same one as my first printer, mine did a bit better out of the box on Benchy, but was using their HyperPLA test filament. It was on a (apparently) wobbly kitchen table too, so I moved it to the top of my safe for future prints.
Nice! I only noticed after testing that the filament they sent is the hyper filament. I plan on doing some strength testing in the future on the hyper speed stuff and see how it compares to the standard PLA+.
Really enjoying you content just found you channel tonight ! binging from WA
Yup, I have the first Ender 3, with a Raspberry Pi running it. Great little machine.
You know it's Merica when they break out the Glock mags and pistols. 😂 Awesome vid man!
That right there got my subscription!
The gun spykosis is absolutely incredible in the USA. As an example, present maximum excitedly 3d printed gun magazine holders. Keep up the good work!
Happy New Year, Deuce!
Happy New Year to you as well. I predict 2024 is going to be interesting to say the least.
@@deuceandguns I think the same.
My jaw dropped when I saw the speed on that printer! I have the ender 3 v2 and the speed on that was insane!
I just got the SE for Christmas. I have tons to learn. But I managed to print a speed loader.
It's a good one.
I've seen different solutions to reduce table wobbling. I have a table I built that's wide enough for three 3D printers and some space between them. Currently it has a Bambu X1C and a Creality CR-10 SE on it. What I did was I folded up a moving blanket into thirds the long way and put it on the table. Then I put two(one for each printer) 16"x16" paver stones on the table where the printers would be. That greatly reduced the movement and vibrations of both the printers and the table. I saw other people do something similar, however they sued packing foam or memory foam sheets instead of a moving blanket.
My printers just live on the floor
The solution of table wobbling is not slinging the bed. Even Creality selling those printers roughly for the same price like this. I hope it will stays like this way, because now the garbage is more expensive than a proper printer.😊
Can't remember when we've seen the Deuce. Does it still run?
Duece
I am looking to buy my 1st printer. How much do you want for your old printer?
You must've looked at the sintering process for 3D printed aluminum...
I just purchased a Bambu Labs A1 after my Ender 2 Pro's main board decided to throw out an erroneous thermal runaway issue and locked the UI. I will say my E2 Pro printer pumped out some fantastic prints over almost 2 years with minimal maintenance. I'm going to try to bring it back to life with a Raspberry PI and octoprint but I'm not optimistic. Thankfully I have a larger format printer to print the things I want while I wait on my A1 to arrive. I hope you have good luck with this printer.
Did you try flashing the firmware to a new version or a community firmware on the ender 2 pro? If that doesn't help the thermistor might be dead, they are only a few dollars for a pack of 5, if the heater cartridge is dead they are also really cheap, around the same price as the thermistors. If the board itself is bad thyen running klipper probably won't help if the sensors aren't sensing anything.
Also you may already be aware but in case you aren't the A1 is having a recall because of faulty bed cables, being mains powered beds this is a serious issue. It's a pity because I was seriously looking into getting one. I think the P1S is what I will go for though as I do print a lot of ABS, nylon and other materials that need an enclosure.
@@Smokinjoewhite thanks Joe! I believe I messed up the board by splicing thermistor cables and fried the port on the board (lesson learned). I love my A1, it squirts incredible quality prints (almost factory looking). I am aware of the bed cable issue and have opted to have Bambu sent me a replacement bed for my A1.
@@tedh7543 Ahh yes I have done similar things in the past, hopefully you haven't fried anything that prevents octoprint or klipper from working, if so a replacement board isn't too expensive to get the printer up and running again, they are great little printers.
Good to hear you got the replacement bed on the way because other than that I have heard nothing but good things about the A1. Happy printing!
@@Smokinjoewhite I'm pretty sure I fried the board. The good news is I have two working printers. I printed a bed cable support and installed it on my A1 at the interface area of concern so I believe this will mitigate any issues with the cable at least until Bambu sends me the new hot bed.
im still looking for 3d printer to replace my half broken ender 3 and on list anre v3 ke and se , k1, bambulab a1 , basically anything below 550euros and with at least 220x220 space . and its a big mess to choose dont know its also long ter purchase and most important is print quality and cheap maintnance 8which is why im a bit worried over bambulab) there is also new ender coming if i saw correctly just v3 looks like clone of a1
im assuming you used pla+ for the taco mags? if not personally would use atleast that for more durability and even more ideally abs or even better asa as they are more durable and asa has better UV and chemical resistance. you will need an enclosure and ventilation for abs and asa though as they do put off fumes. this is why i went with the creality k1
Yep, pla+ because up until this video I was limited to what the original Ender 3 could work with. Working with asa was one of the reasons I got the KE model.
@@deuceandguns I have my original ender 3 in an enclosure and bought an all metal heat break and it is my dedicated ABS/ASA/nylon printer now. I have newer more advanced printers now but that old ender 3 just doesn't skip a beat. I did replace the bed springs with silicone spacers though, it holds level really well and rarely needs adjusting.
Hi. What filament did you use for the tacos? Thanks much.
Typically beef or chicken
what slicer are you using for the ke... i use creality since i have mine and i find it kinda limited
Switch the view to advanced or all under slicing settings.
I currently have a normal Ender 3 pro, and… holy hell that thing was a nightmare. So I’m debating either this or something from Prusa
Prusa has better quality control but you pay for it. It's up to you if the extra money is worth a near guaranteed plug and play experience.
@@deuceandguns yea, hence why I’m debating it or a Bambu Labs X1-carbon or P1S when it comes to market. I get it’s a hobby, but stuff’s frustrating when you spend all this money and have to fix their own mistakes/issues
Bambu may be the way to go now.
Bambu is the way to go unless you plan on printing alot of nylon. My qidi xmax 3 prints nylon gf like it was pla. Huge fan of both printers but the qidi can produce much stronger components.
Hi, could you please let me know if it can print wood? Should be given specs but they dont mention it.
Even better have you tried printing wood?
It'll print the PLA wood filament just fine. I've used both this one as well as my old Ender 3 to print wood pistol grips. Wood PLA clogs easy so keep it very dry, print it hot, and you also may need a larger printer nozzle such as a 0.5mm or 0.6mm.
@@deuceandguns thanks a lot!
Sometimes marketing can be confusing as they show what one can print on model x and not on model y...
Hey man, how are you liking your printer after a month of using it? This is the printer I'm considering, I see a lot of people saying good things, but just want to see if it's still good after a bit of use. :)
Still like it. The extra speed is nice but the quality of the auto leveling feature is game changing.
@@deuceandguns That's good to hear, I'm looking to get my first printer and I'm thinking this might be it and auto leveling is one of my must haves, only because I know I'd stuff it up lol
You are slightly wrong about the speed thing. The k1 is faster
That benchy was unacceptable even 3-5 years ago. Those are not minor issues. I am sure if you pull down the speed that might be ok, but then you will arrive where you have been already or slightly better than an old ender3
I'm ok with it because that was printed at 500mm/s which you're supposed to only use hyper pla vs. the cheapest esun I had laying around. After a bit of tuning all prints after that have been at 300mm/s with pla+ and are super clean. If I needed perfect out of the box I'd paid for perfect out of the box.
Happy new year 🥳🎉🎉🎉🎉🎉🎉
think I'd rather artillery sidewinder
I returned the ender 3 v3 ke after just a few days. I had nothing but issues out of it. Ended up getting a bambu a1. I think the my ender at least is better for someone with experience diagnosing issues and fixing them.
If I hadn't had 3 years of experience with Enders already I'd have been very tempted by that a1. It's a good printer.
Ender 3 v3 ke, elego neptune 4 pro which one is better?
Both are very good but the Ender 3 v3 ke has better auto bed leveling.
You got lucky I guess. Got this same printer last week and I haven’t been able to print anything successfully really.
The bed isn’t sticking enough , been using glue but then it doesn’t finish properly. Got to keep adjusting the z offset manually even after it auto bed leveled.
Are you pre-heating the bed?
I have this Ender and it's tricky for setting parameters when printing. It is not compatible with Ultimakecura or Prusa Slicer. Super Complicated
The Creality slicer has a preset for the ke model ready to go.
As far as I understand, don’t you have to change anything? At the time of sending to print?
Orcaslicer (based on prusaslicer) released version 1.9.0 and has a profile for the new v3 enders. Its what I am vurrently using and works like magic
@@josegregoriodiazatenzo4566 Using the Creality slicer that I downloaded from Creality.com I simply chose the preloaded model V3 KE and clicked to add Tree support I may have also tweaked the temp settings. I also don't connect the printer to wifi so it's usb only for me. Eventually, the Prusa slicer will be updated to offer the V3 KE as a preset in the config wizard but till then I'm rocking the Creality and it's not bad.
@@deuceandguns Thank you friend. The problem is that it's failing me with the filament not sticking to the base is somewhat frustrating. I've heated it to 60 fahrenheit and put 3D printer glue on it and it still fails.
That's a terrible print dude
Printed at 500mm/s using pla that's not rated for 500mm/s with zero tuning. Anything other than spaghetti is a win especially for a $250 printer.