Woodturning :a bowl made from slices of wood 😳
Vložit
- čas přidán 27. 05. 2021
- I am trying to make a bowl entirely made of slices of hazel wood.
After having sliced a good number of washers, I stack them, trying to cross the joints.
Once on the wood lathe, things get complicated, the wood is brittle and the gouges tend to bite ...
then by dint of vibrations the tenon ended up breaking I therefore decided to redo a more solid one in red wood.
In the end the experience is interesting and the result not too bad for a first ..
I think to start the same process again with some adjustments.
Thanks for watching my video and see you soon.
www.etsy.com/fr/shop/BreizhAr...
15% off on your 1st order with the code Breizhartwood-21 on
www.colle21.com
Please note my videos are not intended to educate or serve as a learning method.
They are used only for entertainment.
Do not duplicate what I do because it could be very dangerous.
J'essaie de fabriquer un bol entièrement fais de rondelles de bois de noisetier.
Après avoir tranché un bon nombre de rondelles,je les empiles en essayant de croiser les joints .
Une fois sur le tour à bois les choses se compliquent ,le bois est cassant et les gouges ont tendances à mordre...
puis à force de vibrations le tenon fini par casser je décide donc d'en refaire un plus solide en bois rouge.
Au finale l’expérience est intéressante et le résultat pas trop mal pour une première..
Je pense recommencer le même procéder avec quelques ajustages.
Merci d'avoir regardé ma vidéo et à bientôt.
www.etsy.com/fr/shop/BreizhAr...
-15 % sur votre 1 ère commande avec le code Breizhartwood-21 sur
www.colle21.com
Attention mes vidéos ne sont pas faites pour éduquer ou servir de méthode d'apprentissage.
Elles servent uniquement de divertissement.
Ne reproduisez pas ce que je fais car cela pourrait être très dangereux
music composed and performed by myself
#woodturning
#woodworking
#bawbreizhartwood
#bowlsliceswood
![Eminem - Houdini [Official Music Video]](http://i.ytimg.com/vi/22tVWwmTie8/mqdefault.jpg)
I'm an arborist in Ontario, we call slices like that 'cookies'. So to me, this is a cookie bowl! Love it
TheOriginalBlue62
Thank you for your comment 👍😉
I'm glad you like this cookie bowl 😊
See you soon
Morgan
Call them cookies in the south west of England too buddy 😊
And that's what it's all aboot!
Shout out from an Alabama climbing arborist! Cookies of all sizes haha
I wish you had shown it completely finished…..kind of left us all hanging to see the end result.
Hi Cynthia
It's a piece that I didn't finish because it was an experience...but I'll do it again and give it a finish 😉👍
seeing failure helps me as a novice recognise solutions to failure. Thanks man. this helped a lot.
Thank you for your comment Anthony 😉👍
It's different, I'll give you that.
That you got it turned with only one break is what amazed me. Great job.
Thomas Russell
Thank you so much for your comment :)
Morgan, you never cease to amaze me. Like it was mentioned before you do think outside the box and I’m still not over the vase in the cube ! A tru artist in many levels! Bravo 👏. An inspiration to us all.
Hi Sylvie
Thank you so much !!
I'm happy to know that I'm bringing you some inspiration.
Take care;)
Morgan
I am always amazed that glue can be strong enough to hold a piece like this together when faced the forces exerted on it by the turning process. Every time I see this done, I expect the entire piece to explode as soon as you apply the chisel (if that's the right word for the tools you use).
I guess, like a good weld makes makes multiple piece of metal the same a a single piece; a good glue job makes multiple pieces of wood like a single piece.
snevel
Thank you for your comment 👍
Wood glue is very resistant if you follow a few guidelines, you have to put the parts under pressure for a certain time and you also have to put the right amount ... 🤔
of course you have to be careful when digging with the gouges and not apply too much force ... otherwise ... 😬
By far one of the most unique pieces I have watched be made. I was on the edge of my seat the whole time just waiting to see how it would stand up to the turning Amazing work
Hi Kelley
I am very happy that you appreciated my work and thank you very much for your comment 😊💕💕💕💕
Sometimes our patience gets tested. But you made a great recovery.
Thanks Harry 😍😍
I see a lampshade. Either hanging from the ceiling, or a bowl full of fairy lights. Would create some beautiful random light and shadow pattern.
yes very good idea😉👍
I love your out of the box way of turning! You’re very talented.
Chris
Thank you very much for your comment, I am very happy that you appreciate my work;)
An original. Turned out wonderful. 🌟 And it didn't need anything you don't want it to have. Really enjoyed the watching. 👍
R Koff
Thank you so much for your comment, i'm very glad you like it 😉👍
I am really very happy that you like my work 😊💕
Fascinating alternative method to achieving an open segment bowl. I tried something similar with jigsaw puzzle pieces and viewers did not like it! But the hazelwood in this looks like a great choice. All the best. Ray
Ray whitby
Thank you for your comment😉👍
I especially wanted to try a new experience😊
Not easy with hazelnut🤔
see you soon
Morgan
@@bawbreizhartwood m CT
You're turning looks fantastic. Fabulous looking piece. God bless you my friend and as always amen
Hi Jeff
Thank you so much for your comment 👍😉
I’m very glad you liked it 😊😃
You are truly gifted, well done. From John - Down under.
Thanks John 😊💕💕
Interesting technique and bowl! I wouldn't have thought of using that method. Well done!
Stephanie Lovatt
Thank you so much for your comment 😉👍
Yes I have in this video to try a new experience and I am very happy that you are interested😃❤️❤️
take care
Morgan
Very interesting Morgan! saw in another comment you wanted to keep the color white. Try Minwax Polycrylic. It will not add a tint to your wood. Plus easy to use and will make a great finish.
Gary
ThePapa1947
Thank you very much for your comment😉
yes it is true that hazelnut tends to darken even with neutral products produits
Thank you for the advice I will try this product👍👍
see you soon
Morgan
The pieces of wood reminded me of sliced potatoes… Would you please consider showing us the finished piece? Stained, waxed, whatever magic you artisans use?👍🏻👍🏻❤️
Thank you so much 😊
Amazing how all of our knuckles look the same LOL Very cool idea and project! Thanks for the share!
Hi Mikey and Alyssa
Thank you so much for your comment 👍😉
Him putting those pieces down at the first minute reminded me of the fried peanut butter and banana sandwich I made myself. Thanks Elvis.
Thank you so much for your comment 👍😉
@@bawbreizhartwood umuhrraml
Dude ahahahah
Interesting and real Unique enjoyed watching you create this unique piece Well Done Morgan
Hi Rich
Many thanks for your king comment ❤️❤️❤️
I’m very glad you liked it 😊
Take care
Bravo - A great result from a very challenging project.
Hi Pryere
Merci beaucoup pour votre commentaire ❤️❤️❤️
Thanks for the ideas, I thought that the next step would be to cast it is resin with some color to make the segments stand out.
Hi John
Thank you very much for your comment
Yes I will try with resin next time;)
You are amazing! Your talent is incredible! Great bowl, lots of work and live went into this beautiful masterpiece! Bravo!!
Thank you so much Mary💕😊🌸
Woww, une super idée 🌟 !! Un bol segmenté avec des rondelles de noisetier..!!! Bravo 👏👏👏
Salut Lily
Merci beaucoup pour ton commentaire 😉👍
Oui en gros c’est l’idée…🤔
Congratulations, this video was the most original idea in my feed right now…
Thank you so much for your comment,I’m glad you like it 😊👍
Beautiful piece and great idea! Take care and GOD BLESS!
Hi Stephen
Thank you so much for your comment 👍😉
I’m very glad you like it 😊
Beautiful! Thanks for the video.
Hi Scott
Thankyou very much for your comment ;)
a beautiful lampshade
Thanks Rudi 😊❤️
Love this idea. Can be adapted to many different woods. I think, I would have started with a solid wood base at the start.
Dennis mutz
Thank you for your comment😉👍
Yes in the end I had to put a more stable base..🤔
Neato, I love your idea and the finished product!! Keep the videos coming, sir!!
Hi Dean
Thank you so much for your comment 👍😉
I’m very glad you liked it ❤️❤️
@@bawbreizhartwood I reckon you got to put a lot of trust in the glue to withstand the turning process without hurting you??
yes I trust the glue but you have to be careful
That is an awesome bowl what a work of art absolutely beautiful
Hi Tony
Thank you so much for your comment 😉👍
I’m very glad you like it 😊❤️
Buena Pieza
Incredible work! Bravo!😀👍🔧⚒️🛠️
Thanks Billy😍
Oh my, this was definitely one of the toughest projects I suppose, n you still made it look so easy. But you ended up hurting your hand, hope it wasn't too bad. Lovely piece though!
Hi Sumaira Khalid
Thank you very much for your comment😉👍
I'm very glad you like my job.
Don't worry about my hand it's just superficial and without gravity🙏
see you soon 💕
I love 💘 the natural beauty of the bowl.
Thank you
Hi Penny
Thank you so much for your comment I’m very glad you like it 😊❤️❤️
@@bawbreizhartwood Like it!, I love it. I love watching your wood turning videos. Thanks again
Wow! I look at all those pieces 😮. You have the patience of a Saint!!
😊👍
Wow! Beautiful work!
Hi Dannaboo
Thank you so much for your comment 👍😉
I’m very glad you liked it ❤️
Very interesting 🤔, my diagnosis, the signs of an insane, but brilliant, woodturner.
Perhaps 🤔 caused by getting hit in the head by a fly-away bowl. No one ☝️ will ever know… 🤪
Just kidding, it was brilliant. Those were some really cylindrical branches.
Thanks for sharing 👍
🤣😂
Thank you for your comment comment 😃👍
Please don't be angry or frustration we always love and like your creation even worse anyway. From your Indonesian fans 🙏
Hello Tony Cahyono
Thank you very much for your comment😉👍
I am very happy that you enjoy my work 🙏💕
We here in France love Indonesia very much❤️
Take care
Какая последовательность! Ничего лишнего! Браво! Еще видео! Заглядение!
Рахмет Қаймулин Ермек 😍😍
seems like it would make an interesting pot for a plant.
The NitroG1
yes why not 😉👍
Great concept and the result is beautiful.
Hi James
Thank you so much for your comment 😉😂
I’m very glad you like it 😊
Great idea and it turned out very well
Hi Henk Van De Beek
Thank you so much for your comment 😉👍
I’m very glad you like it 😉👍
I really like your idea. In the future, turn a little faster, making light cuts. Your peice will be a more uniform shape, and your tool won't get pushed around as much. Also, when hollowing, use your tool on the side going downward with the tools you are using. Although I haven't used one, I think you only use a hook on the upward turning side.
Denny pope
Thank you very much for your comment👍😉
and thank you also for the good advice😉
Absolutely beautiful!
Hi Ron
Thank you very much for your comment ;)
I love the bloody knuckle at 11:13. I cannot do a project without drawing blood!
John sauer
😂😂 it's true when you work with wood, your hands are easily damaged, especially with tools ... 🙃
Wood, metal,concrete. It’s the nature of work. “By the sweat of thy brow shall ye eat, by your labor shall the ground bring forth food.”
Hi Evelbill or rather Zappa ?? 🤔😃
Thank you so much for your comment ❤️
Quite the unique bowl...love it!
Hi Carol
Thank you so much for your comment ❤️
I’m very glad you like it 😃😊
See you soon
Awesome idea and beautiful result!
Thank you so much 😊
When cutting with a bandsaw, lower the top guides until they are just above the piece being cut - that way you will not have wandering due to over-flexing of the blade.
1Igster1
yes that's right😉
I would love to see this done again with resin filling in the holes, just a suggestion!
I redid 😉
you will find the video on my channel 👍
Very impressive 👏👌👍 glad it didn't break when it escaped from the lathe
😜👍
I noticed injury on your hand,be safe.
Respect from Pakistan.
Hi Hafiz Usman
Yes you have to be careful because it is very easy to get injured with this kind of work.
Thank you and hello Pakistan
@@bawbreizhartwood Welcome
Artistry!
Thank you so much Sara I’m very flattered 😊❤️❤️
It’s amazing what makes most of it so beautiful from just being seen as hardwood
😉👍
Good design
Thank you so much for your comment 😉👍
Very kewl, love it.
Thanks David 💕💕
Paint the background walls white and maybe add a brighter background source. It would make your woodworking pop more.
Thanks for the advice, it's not always easy to find the best exhibitions for video 😉
that looks awesome, very cool idea.
Hi Ruben
Thank you so much for your comment 😉
Nicely done 👍👍👍Thanks for sharing
Hi Yeagerxp
Thank you so much for your comment 😊👍
Thank you for your work, it’s truly wonderful. This piece seemed very noisy and rough the whole way through. Was it more difficult than pieces with less gaps? And did you ever put a stain or finish on it? Thanks again, fascinating to watch!
Hi EvelBill
Thank you so much for your comment 👍❤️❤️
Indeed the shooting of this piece was more difficult than a classic piece🤔
for the finish I used transparent mat varnish
see you soon
I feel that it was quite wobbly as it wasn’t centered or balanced
Красота, ваза для печенья ! Я живу в России, люблю работать с деревом, но денег на оборудование нет, только ручной труд.
Aleks
Спасибо большое за ваш комментарий, я рада, что вам понравилась эта миска 😉💖
Mais um trabalho maravilhoso, gosto muito das suas ferramentas, são perfeitas parabéns Gerson Franco da Rocha São Paulo Brasil
Ola gerson souza
Obrigado pelo seu comentário😉👍
Estou muito feliz que você goste do meu trabalho😃❤️
Até breve, amigo
Really beautiful. But why you didn't show final version with polish? And I'm sorry for your watch. 😉
Dimitri Artemov
Thank you for your comment😉👍
this achievement was just a new experience
at 9:28, the sound from the following clip started while the video still showed your hand on the wood and it made me jump for a second... That kind of thump thump sound is a jump-scare for any wood worker with their hand still on the part ;)
😅👍🙏
That is very nice beautifully done 👍🏽
Thank you so much for your comment 😉👍
Creative, as usual, Morgan! Would have liked to have seen a final finish though. Also, if i may suggest….you really need a dust collection system, even if it’s just a shop vac to collect sanding dust! The medical community are discovering more and more specie of wood as containing cancer causing carcinogens. Most folks think “well I’m just not that exposed to that sanding dust and I’ll wear a mask”…..it’s just not enough Morgan! I say this out of concern for your health. I’d really hate to see your creativity and talent cut short because of lung cancer that could have been prevented!! Please consider at least a shop vacuum? Sound wouldn’t be an issue with your videos because there’s no narration anyway! Think about it please.
Hi Charles
Thank you very much for caring about my state of health 😉
Note that I always wear a high protection mask and that in addition I have a very efficient suction system, I simply cut it for short periods when I film the sanding so as not to generate too much noise for the spectator 😉
But you are right, you have to protect yourself from very harmful wood dust !!
Lovely work.
Hi Cathy
Thank you so much for your comment 😉😊💕
I now want scalloped potatoes.
Hi Matthew Willis
Thank you so much for your comment 😉👍👍
Dissapointing at the end. I really wanted to see it at least oiled. But the rest: very interesting.
Thank you so much for you comment 😉👍👍
você conseguiu mais um inscrito🇧🇷👍💯
Marcenaria Hobby 7 pallet
Obrigado pelo seu comentário😉👍
Bem vindo ao meu canal, fico feliz em ter você aqui
vejo você em breve
Wonderful looking bowl.
Hi Jack
Thank you so much for your comment 😊😉👍
Well, a very difficult piece to turn. Figured the original tenon didn't have enough meat to hold it when you reversed it, and guessed right for once.
robohippie
yes the stud was a bit tight😬
with the second it was better .
Hi Sir, Your hard work definitely deserves a subscibe. But It would be more interesting if you fill epoxy in between the blank spaces.
Thank you so much for your comment ❤️❤️❤️
Yes why not 🤔👍👍
Très original, j'adore!
Merci beaucoup Leon 😊👍💖💖
Muito criativo parabéns 👏👏👏👏👏👏
Muito obrigado 😊💖💖
I'm very impressed!!!
Hi Harvey
Thank you so much for your comment 😉👍😊
I’m very glad you like it 😃
You trusted that blue much than I would have! Still, it turned out well!
Bonjour, l’idée est bonne.
😉 merci 👍👍
Really cool looking bowl. Love to see more like this but with resin pours. Maybe a lamp? It would look like. little stain glass windows.
Hi Virginia
Yes why not 🧐
Thank you so much for your comment 😊❤️❤️
Very good, despite the fact that it comes off, it was very cool with a reddish wood base and it is very original; only the varnish / lacquer / drying oil / wax was missing.
Luis Alberto Ruiz Galindo
Thank you very much for your comment😉👍
Yes the experience was interesting, I will start again with a better technique🤔
Looks cool but for more stability after gluing it all together I would have dunked it in Resin THEN carved it up
Thank you for your comment 😉👍
That project has to be hard on the hands and wrists. You come up with the most unique turnings. If I only had half the vision and imagination that you do.......
Indeed it was a rather difficult project to turn .. Thank you for your nice comment 😊💖
Very nice sorry about the mishap glad it turned out alright James
😉😊❤️
Would have looked cooler if u had filled it up with resin before turning so that all holes would have vanished and bowl would be more functional
Yes Why not 🤔
@@bawbreizhartwood yeah...especially because the inside pattern on this is just awesome...like a bent chessboard! would have been great...
Serviço de primeira,ficou lindão, parabéns , são Paulo Brasil Franco da Rocha abraço
Gerson Souza
Muito obrigado pelo seu comentário😉👍
Estou feliz que você gostou desta peça😊
Até breve, amigo
I watched the whole turning process on the edge of my seat! Aren't modern adhesives great.
😅😉🤔
You have far more confidence is that little dab of glue then I would ever have! Interesting product :)
Thanks for the comment :)
Yes it is true that sometimes the glue can come undone and it can do big damage ...
That was really awesome... a little on the edge of the seat kind of video for sure lol. 😁
Thank you so much for your comment !
I liked it very much
Hi Sandy
Thank you so much for your comment 👍😉
I’m very glad you liked it 😊❤️❤️❤️
Maybe you need a press and turn the RPM up. Nice ideas. Best regards.
Yes with a good press it would have been more solid...🤔
super boulot comme toujours.
Merci Jean Claude, je suis très flatté 😊❤️❤️❤️
C'est joli, bravo à vous
Bonjour Stéphane
Merci beaucoup pour votre commentaire 😉👍
Hi. Not sure if that's for me, but admire your patience and I can see it was probably a fun challenge that worked out ok in the end!
Peter
Exactly !
You understood everything this was a challenge or an experience and indeed the result was nice :))
I haven't had a shop in three years.
That skinned knuckle brings back memories though!!!
🤔
you forgot the colored epoxy ...
full of holes but still looks awesome
nice work!
Hi Paul
Thank you for your comment 😉👍👍
soon a new video will be released with the same piece but with resin 😉
It is more beautiful at the first steps
Hi Gamage Perera
Thank you so much for your comment 👍
Que ingenioso!!!!👏👏👏👏💖💖💖💖
Sivlia😍😍 Thank you😊
What an amazing bowl.
Thank you so much Frank😉❤️
pretty cool looking
Hi Chico
Thank you so much for your comment 😊👍
Ok, different. Everyone a new lesson I feel. That was great fun, I did enjoy it. Thank you.
Hi jimbojet
Thank you so much for your comment ❤️👍
Interesting.
Hi Sean
Thank you so much for your comment ❤️😉
Hi. I love this piece. Who am I kidding, I love everything you make. So creative!! Did you consider using resin to seal the holes or was that never going to be a part of the process?
Pamela M. Cluthé
Thank you very much for your comment ❤️❤️❤️
I am really very happy that you are enjoying my work 😊😍
I wanted this bowl as is😉
I will do another very soon and I will put resin👍👍
see you soon
Morgan