Atem Mini Headphone Output Solution | Monitor Audio On Headphones In RealTime.
Vložit
- čas přidán 9. 12. 2020
- In this video tutorial, I will show you a simple, inexpensive solution in order to monitor your audio in your headphones, since the ATEM Mini does not have a headphone jack. I Will show you how to monitor your output of your processed audio in your headphones. Plus, explain how to get good, clean preamp gain into the ATEM, and monitor in Realtime without latency.
ITEMS DESCRIBED IN THIS VIDEO:
PROZOR: amzn.to/3oxhoMa (Amazon)
ZOOM H6: amzn.to/3oEWIlq (Amazon)
ATEM MINI: amzn.to/2VYwIVR (Amazon)
3.5mm (1/8") CABLE: amzn.to/374bP1K (Amazon)
HEADPHONES: amzn.to/33ZwrGH (Amazon)
www.supplementalseminary.com
SUBSCRIBE: / @towlermedia
Download TubeBuddy for free: www.tubebuddy.com/suppsem
StreamYard Live Stream Software ($10 off!): streamyard.com?pal=5697831709442048
My CZcams Studio Set-Up:
Canon EOS Rebel SL2: amzn.to/3cYR882 (Amazon)
amzn.to/2ZHq1uH (Amazon)
Camera Dummy Battery: amzn.to/2WXmDtS (Amazon)
HDMI Cable: amzn.to/3cYLwuH (Amazon)
Elgato Cam Link: amzn.to/3c08JLw (Amazon)
Rode NT-1: amzn.to/3ghGDyQ (Amazon)
Boom Arm: amzn.to/2Tx1HaO (Amazon)
XLR Cables: amzn.to/3gaSb73 (Amazon)
RodeCaster Pro: amzn.to/2WWToHy (Amazon)
Headphones: amzn.to/3eau5aD (Amazon)
Lighting: amzn.to/3bXDgtw (Amazon)
Computer: amzn.to/3ebIeEr (Amazon)
Monitor: amzn.to/3c44kHL (Amazon)
Elgato Stream Deck: amzn.to/2ywzSbs (Amazon)
Acoustical Foam 2”: www.thefoamfactory.com/acoust...
Logitech Brio: amzn.to/3bxXRWw (Amazon)
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product with the links that I provide I may receive a small commission at no additional cost to you. I appreciate your support, as this allows me to produce free content for my channel. - Jak na to + styl
6:53 is his answer
Very good review! Great detail on this product!
Your radio voice had me in 2 seconds. Thank you great information
Heading over to grab the Prozar Extractor....This video is just what I needed to solve my audio monitoring problem.I have a Dcorn 7 inch monitor that I thought would have a headphone out but nope.Thanks for a great video
you have an awesome channel bro, thanks
Great video thanks! hey how about monitoring 2 or 2 headphones with your setup? how would you approach that?
Thanks for the video. Just found out about the monitor adapter and can’t wait to use it.
Can you explain your connection using your Zoom.
Currently we are coming out of a QUPax mixer so I’m guessing we are using the digital desks preamps.
I have the zoom F6 and wondered if it was needed to get even cleaner audio?
So if you can explain how you connected it all together that would be great. Thanks for the video
Good Video, thanks for the explanation 👍🏻
My pleasure!
Thanks for this info! I am wondering can you clear that latency somehow without that streaming software? This sound monitoring is an issue, if you dont have a monitor with hp-out.
Great video!
I don't know what went through their heads when they designed this thing. Only 1/8" jacks for sound, no sound monitoring and instead they used up a whole lot of real estate with hard wired nonsensical swoop cut buttons.
The only thing that makes the ATEM Mini great is that noone made a better solution yet.
Excellent Video!
Thank you very much!
This is great, could you tell me if I can connect all 3, the DBX286S, the PROZOR and atem mini? I don't need to also get the zoom do I? I already have the DBX and Atem mini pro connected, but I need to monitor my voice. Could I just hook up the PROZOR to what I have already setup? Will use your links of course. Thank you in advance for your help.
Absolutely! I would run mic to dbx286s to use as preamp (no Zoom needed), then to Atem, then to Prozor (to monitor output audio). Something to think about would be to "bypass" the processing of the dbx, if will be using the Atem audio processing. Or could run processing from dbx and bypass Atem audio software, or use processing from both to hone it in.
Thanks for the great solution!. But I am wondering if you could monitor the audio through the headphone jack of the Zoom H6....
Yes, you could monitor audio from the Zoom H6 headphone jack, you would just not be able to hear the processed audio after it passes through the ATEM Mini.
Obrigado ❤
I need your help. I have a Shure SM7B Microphone running into a cloud lifter, running into the DBX286S. I then have the DBX286s running into ATEM Mini Pro ISO via a 1/8" to 1/4" TRS cable (plugged into the Mic 1 input on the ATEM Mini). I'm getting great audio using this setup. However, like you, I wanted a way to monitor my audio via headphones. So I bought the PROZOR HDMI Audio extractor and connected just as you described. I even have my monitor going into it and I'm getting great video. The problem is, I can't hear anything through my headphones. I plugged my headphones directly into the PROZOR, but I'm getting no sound. Is there a setting I need to change on the ATEM Mini in order to get sound through my headphones? Please help. I'm this close to having my setup complete. Thanks in advance for your help.
Are you getting video through the Prozor HDMI output on your recording? Does it have audio on recording? Let me know. In the meantime, I will review my setup for his, as it has been around 2 yrs since I made this video and I need to refresh my memory real quick.
I'm using blackmagic sdi to analog converter, but no volume control
Hello. Got a hdmi audio extractor , works great with hdmi from 2 different camcorders for headphone audio. But plugging into hdmi out of atem mini pro there is no audio on headphones. Is there some atem setup required help please?. Thank You.
You should be hearing the audio from the headphone jack of the hdmi audio extractor. Is your signal flow going from the camcorder>atem>atem master out>hdmi extractor? Also, mine has volume buttons on the side of the splitter. Check that too and let me know
@@towlermedia Thank you for reply . Could not get the prozor, mine does not have volume buttons, signal from camcorder into cam 1 atem mini pro-atem mini USB c to computer running v mix. It works well only one Sunday I was sick stand in had some difficulty and turned all knobs on behringer 20 ch mixer, turned out only problem was mixer audio out to atem mic 1 got unplugged. After all that problem was bad sound because he had turned on sub woofer out filter on mono out for atem.
My hdmi audio extractor works when connecting a camcorder directly to hdmi in of this little box but not when connecting the hdmi out of atem to hdmi of this box.
Prozor does not seem to available now. Any replacement recommended.
Now I use cell phone to monitor you tube channel whit headphones.
Why didn't you use your RODEcaster as an audio interface with your ATEM Mini? It has awesome preamps, not to mention all the other great features to enhance your audio.
I am always experimenting. Will have to try the RODECaster Pro workflow. I have seen several videos here on YT showing how to connect the RODECaster Pro to the ATEM. Thanks for watching and commenting!
If you have this figured out, please LMK
How did you get the webcam as an input into the atem mini?
i think, his webcam is plugged to the computer an recorded in OBS ... not to the atem
This is correct. DSLR camera hooked to ATEM Mini and Logitech Brio running through OBS to get 2nd camera angle.
I have the webcam running through USB directly to the computer through OBS. This was to give me a 2nd camera angle for video tutorial. I wonder if one could get a webcam through the ATEM? Good question. Seen a few things here on CZcams about it. If you find out, please do share. Thanks for watching!
@@towlermedia There are Options to Convert "USB to HDMI", but seem to be too expensive. www.febon.net/products/uvc-to-hdmi-uvc-to-ios .... i would rather go for a affordable camera/camcorder with HDMI or stick to OBS with Webcam, if the PC is in use anyway ...
how do you connect your logitech brio on your Atem mini ?
The Logitech Brio was not hooked to the ATEM. It was connected to computer seperately via USB.
Thanks for the video. Little tip. Your mic is too hot. It sounds distorted and I can see it clipping in the red on ATEM and OBS.
This video was made about 3-4 years ago, i have learned a whole lot more since then. Need to do an update, or better yet, they add a headphone out jack to the ATEM. Problem solved.
no headphone jack blows my mind. But no real solution to the inputs of hearing the audio is another. If there is no headphone jack on the atem, there should be a way to at least hear audio in the software. You can see the audio levels in the software. But what good is it for me to see audio levels if I can't hear what I am seeing without going the extra mile to hookup external third party devices? And I shouldn't have to purchase another model.
why my ATEM Mini Pro does not recognized my pc as "webcam
if your monitor have audio out you can monitor from that.
Exactly! This is also an option to monitor output audio from the ATEM. Thanks for sharing!
This is what I was hoping when I bought a Dcorn 7 inch monitor which in the description at that time had headphone out...When I received it though,guess what? No headphone out.
You just saved my time.
I was going to buy this extractor and then I saw your comment, I'm planning to use external monitor with ATEM so I can just grab the audio from there.
Why not use headphones input on zoom?
I could monitor from the zoom headphone jack, and that would be fine. But it would not give me the output audio that has been processed from the dbx286s & the ATEM Mini. Thanks for watching!
Thanks. Just ordered
does not the computer or laptop have a headphone jack out?
Yes, it does! I understand this can be another way of monitoring audio as well?
Need the quick answer see 6:55 -7:34
I would have just plugged my headphones into the Zoom H6.
That is an option, but would not be hearing the processed output audio from ATEM audio software.
The way you are doing your audio monitoring is not the greatest you should be resync in the atem yes your monitoring in real time will be off, what you should do is set your delay in the atem and then the output hdmi and usb to USB will be in sync (I guess this work flow that you did would only be helpful with the non pro version) yes your monitoring of yourself will be off, but once you have your levels set then you should monitor from your zoom this way your audio will be in sync out from hdmi and usb no need to delay in obs the echo that you heard was from the audio being in sync with the video as the video is delayed 6 frames
You might have also been better suited to buy a rodecaster pro for a preamp or even a cheaper 3 channel mixer
Thanks for the input, Mark! Appreciate you watching and commenting. This certainly is a learning process.
7 minutes in to get to the point….
You are exactly right. Going to redo this video and give the answer quickly and briefly. I agree 100%. It was unscripted and when you do that it tends to be too long. Thanks for watching.
Thank you! I was about to give up