Best LED Turn Signals for Motorcycle Vulcan 650 Bike Master Tanto Front LED Turn Signals Install
Vložit
- čas přidán 25. 08. 2024
- #Vulcan650s #Kawasaki #Turnsignals #Bikemaster #Motovlog #Vulcan650 #DIY
👇 SUBSCRIBE NOW 👇
/ @kamdorian
🎁SCROLL DOWN FOR LINKS TO BUY THE MODS AND MORE VIDEOS 🎁
In this video I cover how to remove the stock front turn signals on my Kawasaki Vulcan 650 S and install Tanto LED Front Turn Signals from Bike Master. The install is pretty simple, just requires some tools and the will to perform surgery on your beloved motorcycle! The LED turn signals are much brighter than stock and have a cleaner low profile look. These turn signals will work on all model year Vulcan 650 motorcycles and many other motorcycles as well. Any questions? Leave a comment below!
MORE Vulcan 650 VIDEOS!
👇LED Headlight Turn Signal Integration👇
• Best LED Headlight for...
👇LED Headlight Install Video👇
• Best LED Headlight for...
👇Fender Delete Taillight Install Video👇
• Best Fender Delete for...
👇Quadlock Install and Review👇
• Best Phone Mount for M...
👇Bar End Mirrors and Levers Review👇
• Best Bar End Mirrors a...
👇Bar End Mirror Install Video👇
• How to Install Bar End...
👇Brake and Clutch Lever Install Video👇
• How to Install Best Br...
👇Vulcan 650 Riding and Meeting Motovlog👇
• Vulcan 650 S Riding Mo...
👇Atlas Throttle Lock Cruise Control Review Video👇
• Best Cruise Control fo...
👇CS Racing Aftermarket Exhaust Sound👇
• Best Aftermarket Exhau...
👇Vulcan 650 S Riding Motovlog👇
• Vulcan 650 S Riding Mo...
👇Radiator Grill Cover Install Video👇
• Best Radiator Grill fo...
👇Kuryakyn Floor Board Install Video👇
• Best Foot Pegs Floorbo...
🎁BUY THE MODS!!!!🎁
👇Buy CS Racing Exhaust with 5% DISCOUNT👇
csracingusa.co...
👇10% Discount on Quadlock👇
quadlock.refr.c...
👇Buy Kuryakyn Floorboards👇
amzn.to/3ki311o
👇Buy Adapters for Floorboards👇
amzn.to/3ZJeyam
👇Buy Bar End Mirrors👇
amzn.to/3ZNjU4A
👇Buy Clutch and Brake Levers👇
amzn.to/3XEjax7
👇Buy Radiator Grill Cover👇
amzn.to/3XB6Ddg
👇Buy Chrome Glow Fender Delete Taillight👇
amzn.to/3kpxuL6
👇Buy LED Headlight👇
amzn.to/3km9TuN
👇Buy LED Flasher Relay to fix hyperflash👇
amzn.to/3CYfz4w
👇Buy Quad Lock Phone Mount PRO👇
amzn.to/3ZGqJox
👇Buy Quad Lock Phone Mount👇
amzn.to/3CYdXrB
👇Buy Quad Lock Vibration Dampener👇
amzn.to/3kqqzBk
👇Buy Atlas Cruise Control👇
amzn.to/3ki4GUG
Thank you for supporting the channel! As an Amazon Associate I earn from qualifying purchases.
Thanks for watching!
Follow me on Instagram @kamdorian
Hit the LIKE button and SUBSCRIBE!!
Thanks man! I always follow your example to modify my Vulcan s , cheers ! 🎉
Awesome thanks for watching! Glad the videos help you, ride safe my friend
You need in line resistors to fix the fast blink and it'll probably also fix the headlight switchbacks as well when the bike is seeing the correct voltage on the system
Awesome thanks for the tip my friend!
@@Kamdorian no problem, there's also a fast blink relay on amazon that may fix the issue. I'm looking to add LEDs to my bike later this year when I get a vulcan
@@lambotama nice yea I got the relay from Amazon just haven't had time to install yet. I might sell my Vulcan do you want to buy it 😎
@@Kamdorian 😂😂 man, I wish, but I'm going to be financing
@@Kamdorian Why are you selling your Vulcan, have you found a replacement for it, if so, which one?
I may not always comment, just because of the sheer volume of videos I watch every day, but I will always leave a thumbs up.
As for screwdrivers, you should get yourself a set of JIS screwdrivers to use on your motorcycle. Not saying the Phillips does not work, but most Japanese motorcycles use JIS screws. You can look up the difference in the JIS compared to Phillips. JIS will work well on both JIS and Phillips screws, but Phillips will not work well for all JIS screws. Phillips screwdrivers have a tendency to strip JIS screws.
EDIT; Here is a good video explaining the differences. czcams.com/video/VpqUhIZ-EJo/video.html
Wow great to know man! I watched the video, very informative. I do feel the phillips tends to strip the screws on the Vulcan. Definitely going to look for a nice JIS set now.
Ive been contemplating about getting the headlight but wasnt sure how bright it would be but thats confirmed it for me. Super bright.
Yea I highly recommend the headlight it's very bright and you see everything in front, much much better than stock.
@@Kamdorian I've only had my bike for about a month or so. Starting to look for upgrades now so that headlight is a good starter. 👍
@@theinformant6704 for sure great start, check out my other videos I have done many mods!
@@Kamdorian way ahead of you dude, watched all of them, liked all of them and already subscribed. 👍
@@theinformant6704 awesome thanks man appreciate it!
I enjoy my Kawasaki vulcan s650.
I am extremely happy with it!
Same here! Which year and color do you have? I am counting down the days to spring time so can ride again.
@@Kamdorian Year 2018, black as yours. You can see it on the banner of my channel here: czcams.com/channels/kX41CbUL5zFRxbqvYz74iA.html
@@born2moto cool I just subscribed. I like the crash bars you have I'll check out your videos. Ride safe bro!
@@Kamdorian Thank you :)
I am subscribed to your channel too, you have great videos. Ride safe too!
Looks even better with not blinking the turn lights in the central one
Wow. I was thinking about you today and here you are. It's not couple of weeks. I guess more than 3 or 4 weeks. Hope you guys are safe and doing well. 😊
Thanks bud we are doing well, now that my thumb is mostly healed I can ride again soon! Have to get it in before the season ends here.
@@Kamdorian I hope you recover completely, soon. Lets hit 1k subs soon. 😁
@@dashsunil Thanks Dash! Yes the goal is 1000 subs very soon hopefully. Please share my channel and videos if you can, appreciate your continued support!
I did the connection with the posi taps but for some reason they dont turn on, and on the dash it doesn’t show them “on” I have no idea why or what to do to fix it, so yay lol
What happens when you press the turn signal buttons? Double check the connections you made. Grab the original lights and connect them to confirm if they still work. If they don't work then something else might be wrong with your electrical system. Sorry you are having these issues, hopefully we can get it working
5:24, you can sand them down to make the surface clean. Sanding pads are available in any DIY store.
Yea I know I could have but was lazy haha and didn't feel it was needed. Can barely see the gap. Plus that plastic was very hard would take a while to sand down by hand lol
Maybe use a dremel to drill out the inside of fork mount
Yes that would be easiest and cleanest way!
The Kawasaki Kamdorian 650 looking real nice lol
Haha I like that name! Thanks man
Where did you put the extra wiring. Didn’t see it in the video
I just tucked it under the headlight and gauge cluster. Its not really hidden that well.
14:15, when you switch the turn signal, the white light doesnt activate for a second. Is there any solution to that? Love the signals but if it makes the main light not work properly, my interest drops for sure.
Installing a flash relay might solve the problem. However those white lights are just adding minor visibility increase for cars coming towards you. The headlight beam is still the main light that is all you really need.
Would a new hyperflash relay work to solve the issue being those are LED?
Yes relay from Amazon fixes the issue
Your head lamp not blinking maybe due to voltage drop used by led's. We get a message in dodge van that the license bulb is out, but it was replaced with a led bulb.
yea I am hoping the flash relay module will fix this. It worked fine until I installed the LED blinkers.
Did the relay solve the issue with headlight not bllinking?
Yes it did! Got the flash relay from Amazon amzn.to/43EoLHw
Come on. Use a dremell tool to clean up your plastic mount . Blue lock-tite & lock washer . Take the nut put a bolt in heat with a propane torch and push it in place. I've done this method before with a screw driver. Just heat it up and push it thru ( no drilling required).
You right, good tips thanks man! I'll keep it in mind for next time
Pra corrigir a velocidade desse pisca? Como faz?
@@osvaldinoneto5047 do you mean correcting speed of the flash? You have to get a flash relay from Amazon amzn.to/3yCIaNS
@@Kamdorian thanks man
Did the LED Relay fix the front headlamp blink too ?
Yes it did!
@@Kamdorian which relay did you get? I am still having issues with the headlight indicator not longer blinking
@@Gamble2123 amzn.to/3V74ebK
Or just buy the adapter plates and save yourself allot of work , also keeps the original lights intact.
Btw step one is changing the flasher relay .
Where can I find the adapter plates? Yes, I still have to change the flasher relay!
Love your videos. Do you happen to have the link where you got the positap? Thanks
Thank you! Can find them on Amazon, eBay, or Walmart just search positap here is the Amazon link Posi-tap Connectors, 10-12 Gauge (Black) (5) www.amazon.com/dp/B089XNL6C6/ref=cm_sw_r_apan_i_2VWY3YWGZGAEP37H8HYE?psc=1
Have you tried your four way flashers I changed my signals out with amber lenses and regular bulbs turn signals worked fine but four way emergency flashers would blink once and stop I had too change them back
Do you mean the hazard flash lights? Yes, they work fine for me. Maybe your wiring had an issue? Do you have the flash relay installed? That might help too.
Hey man nice videos. Got the link for turn signal? Is there an option to turn signal light also to flash ( integrated in with DLR) fwhen you turn the LR signals on? Thnx for info and Videos..
bikemaster.com/amp/bikemaster-tanto-led-turn-signals-266192.html I also added the link to the video description. The DLR was synced with the stock turn signals but something went wrong in the connection after I installed the new tanto turn signals, I have to figure out how to fix it! If you figure it out please let me know.
@@Kamdorian hi, were you able to fix the turning signal light with the headlight? To flash at the same time?? Plz lmk I'm having the same issue.
Thanks J.R
Hey mate where did you get ur headlight would you be able to send a link with all the parts for it to ?
Here is the link, it comes with all needed parts amzn.to/44W7Mjm. And here is the link for the positaps to make the electrical connections amzn.to/44DeKtD
Is it hard to wire up and put on ?
@@markhin1604 it's very easy check my headlight install video here czcams.com/video/ibMgMf-veGo/video.html
A Drimel will work better to clean that out better, it's a fine point sander kinda.
You are correct! Wish I had one when I was doing it. Thanks man
Can you also give LED turning signal site? Where to buy? :)
amzn.to/44zCOwR
Thank you so much !!!!!
Do u need the small ones legally if the head light already does the blinking turn signal for you?
It all depends on the state or country you live in. Laws are different everywhere. I like the look of the turn signals so I don't mind having both. I have heard some people use just the turn signals in the LED headlight without smaller turn signals in the front.
What headlight you have pretty bright
Yes very bright and nice it's made by sktyants got it from Amazon check this video on the install and video description has Amazon link czcams.com/video/ibMgMf-veGo/video.html
You have a hyperflash issieu. You need 6 Ohm resistors.
Yea I'm going to install the flasher relay. Curious though where would you install the resistors?
@@Kamdorian where you have space and if possible, a flat metal surface. Or fab a small alu plate
@@corneilcorneil got it thanks for the tips!!
Did you ever install the flashers for the fast blink? If so, do you have a link?
Not yet sorry man, plan to do it soon, already have the relay
@@Kamdorian what relay did you get?
@@jortjr this one from Amazon 2-Pin Electronic LED Flasher... www.amazon.com/dp/B073J82PNF?ref=ppx_pop_mob_ap_share
Where did you replaced the relay on the bike? Im tryng to change the rrlay and i dont find where to replace it.
Fuerte chapuza
No te gusta?
What size drillbit did you use?
I don't remember but it was pretty big, you just want big enough to basically shred the plastic away. A smaller drill bit will just take longer to remove the plastic. Takes some trial and error. I also used pliers to pull chunks of the plastic off after hitting with drill. Kind of an iterative process.
Use a butterfly drill.
when you changed all leds did you have to install any relay for hyper flash?
A relay is needed because I do have hyper flash but I haven't installed it yet. Can be found for cheap on Amazon.
@@Kamdorian thank you! Do you know if is not installed will it cause any damage?
@@Dhern094 no damage that I know of. Mine has been working fine for many months. If some other wiring is incorrect you could have a short circuit or maybe blown fuse but I have not seen any of that happen.
@@Kamdorian good to know. Is not like is hard mod or anything but the idea of taking off the tank to find the relay is not very appealing to me 😅
@@Dhern094 same here!! That's why I am lazy to install it. I hear there is a way to install without removing tank but not 100% sure if it works. Will try at some point and let you know how it goes.
Sorry dude, but this blinker is just not safe with how dim it is. And the way you 'modded' your bike to make them fit was just painful to watch.
Maybe a led bulb would be easier lol
I know it’s not the look your wanting.
Can the bulbs in the stock turn signals be swapped? Yea I like the low profile look of these smaller ones.
They will blink because tou dont have back turn signals
I just need the flasher relay installed. I have it just haven't had time to install yet. The chromeglow taillight I have installed already has integrated blinkers.
The turn signals look great but the headlight you have on is horrendous looking, it totally kills the look of the bike
Makes it look better in my opinion 😎
@splinter8353 which one do you have?
I disagree, i think it looks amazing. Its all about preference
@@Kamdorianlooks good don’t listen to him
@@maverickhaiar9336 I agree looks great! Thanks for the backup lol
A nut is not a bolt