How To Aim Your Headlights | Elite Series Headlights from Diode Dynamics
Vložit
- čas přidán 5. 07. 2024
- Get your Elite Series Headlights here:
www.diodedynamics.com/lightin...
Watch how to aim your fog lights:
• How to Aim Your Fog Li...
How do we test and measure products? Learn more here: www.diodedynamics.com/product...
0:00 Intro
0:20 Getting Started
0:37 Height/Distance Measurements
2:44 Aiming Adjustments
3:44 Outro
In this video, we show you how to properly aim your headlights using our Elite Series JL/JT headlights. With built-in adjusters, this process can be completed in just a couple of minutes with a measuring tape, tape, and the provided adjustment tool.
Elite Series LED Headlights for the 2018-2023 Jeep JL Wrangler and 2020-2023 JT Gladiator from Diode Dynamics were designed for maximum performance, and they are the only 9-inch headlights that are 100% engineered and assembled in the USA. With the latest technology and features, they redefine what’s possible for aftermarket headlights!
With OEM-grade quality, these Elite Series JL Wrangler and Gladiator Headlights will add a switchback turn signal, welcome sequence, a brighter DRL halo with selectable color, and optional off road lighting and show mode. Plus, you’ll get unmatched performance and output, backed by an 8-year warranty.
Questions or concerns? Email us at contact@diodedynamics.com or call 314-205-3033 Monday-Friday CST.
Thanks for watching!
Products shown:
DD6165
DD5166 - Auta a dopravní prostředky
I’ve been trying to aim my lights for the past 10 months with no luck. All I can do is rotate a beam adjustment screw a little bit and do a road test on the way to work. I don’t have a wall and 25ft of level ground.
We recommend going to your local Firehouse, and asking them if you can utilize their doors and ramp to aim your headlights if you can't find anywhere else!
very informative! i'll use this for my new Elite Max JT headlights :)
Oh yeahh!!!! 🤘🤘🤘
Cannot adjust my headlights on my 3.6 gas gladiator. Cannot get to the adjustment screws while headlights are installed. Only way to access them is to remove the headlights, which seems a little goofy to me.
Hey there! Sorry about that! Feel free to give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our service team would be happy to help you with that.
Your not alone. Trying to adjust mine and have to pull the lights out to adjust them. Seems a little strange to me. Hopefully gen 2 will have adjustment screws accessible from the top so they can be installed amd then adjusted
Same, i can get the drivers side with a ratchet but the passenger side has to come out. They should have come with a 90 degree adapter
Because its a Chrysler😆
just installed these on my gladiator and they are accessible but barely. the driver side reachable using the supplied key tool just may need to move factory harness and inch or so to help align the tool, passenger side is way easier but you will need to remove the 10mm bolt hold factory air cleaner box in place and just pick up on that end of the box. Their is enough play in the intake hose to be able to move the box with out have to disconnect the hose. Hope this helps!!!
Are the lights shipping yet?
Our production team is working hard to assemble, test, and pack the lights so they can be shipped to you as fast as possible! We appreciate your patience!
I received mine last Friday, got them installed finally yesterday. I think I don’t have the bolts tight enough though because I can only see about 15’ in front of the Jeep, anything beyond that is blacker than black. Headlight seemed tight, didn’t want to overtorque the bolts. Don’t know what torque spec is
Sir, I really want to join your team I have mailed too but they haven't replied. I want to share my passion and skills with a high quality and standard team like diode dynamics.
Hey there! You can apply online here:
www.diodedynamics.com/careers