2 Things: I saw the far left machine started to loose it's height a lot quicker than the other 3. Is there something we should make sure we do so that doesn't happen? Secondly, Does the wattage of the machine you buy matter? If so, what is the difference in regards to wattage? Is it simply the intensity of the sparkler effect?
Hey Karefreeonthebeat, I think the far left machine had some powder left in the unit from a previous use, which made the gears spin slower, and not use as much powder. In regards to wattage, I’m currently in the making of another video - Comparing the VEVOR 500W vs 700W Cold Sparklers. I’ve just been a little tied up. But there is definitely a difference. The 700 Watt is a bigger machine and felt like it burned a little hotter, which is good for the machine to burn all the remaining powder. I’ll be sure to post it soon.
Thanks Nicholas, Yeah I'll try to set aside some time to take it apart and back together. I created a video to help troubleshoot at the end of the video there's another video "Troubleshoot & Fix Vevor Cold Sparklers."
Great video , thanks for posting. Being absolutely bran new to this, a couple of questions. I am assuming you are using the 500W in you video. if you hook it up to a DMX board and it say 2 channels needed ( one for heat) how do you select the "b, c, d" height, and how long ( typically ) would a full fill last on high?
Can shoot the sparks in short bursts? For example shoot for 10 seconds wait a min shoot for 10 more? Also is there a way to know when the powder is getting low or do you just wait till it no longer sparks. And once you use up the powder can you refill immediately or do you need to wait for the unit to cool?
I purchased 2 of these and tried using with remote alone (no dmx controller). I paired remote to both machines and did not daisy chain them. What a disaster. They do not always simultaneously respond to the remote commands and then go back and forth as I am trying to turn both off. I want to see if daisy chaining them will work better. Do you know how I would unpair the second one from the remote?
Hey Justin. Sorry just now getting to your comment. My wife and I just found out we’re expecting a little one and haven’t gotten to all the comments. Check this CZcams video (czcams.com/video/L4NGnbfT-MU/video.html) might help explain everything. I had the same thing happen to me when I started. The units are capable of being pair with any of the remotes, so to get around this I just used the DMX cables, and made one unit the Host (LN-H) and the rest mirrored (L- -H). The video I linked is one I made to help walk anyone thru the process of daisy chaining the DMX cable.
Great video. I do have a question reguardi g the case. Will it hold 4 of the bigger 700w cold park by vevor? Or do you know any similar case that does ?
Sorry for the late reply. That’s a good question. I’m not sure about the dimensions of the 700W cold sparklers. I’d imagine if the units are a little larger, then it wouldn’t fit. I measured my units, multiplied that by 4, and found the best Pelican case that would fit all units. Hope that helps! Sorry I don’t know the 700W version’s dimensions.
Hi @roamck9829! Yes these are safe to run indoors. There’s indoor and outdoor powder. Indoor is a bit more fine and outdoor is a little larger grit of Titanium powder. Outdoor powder can go higher and produce more spark. But both are safe to touch and are fine indoors. The machines heat up to 500 degrees so that when the powder touches the hot unit, it sparks immediately and gets sent upward. Imagine lighting a wedding sparkler wand with a match (it takes a while) as compared to a torch (lights immediately). That’s the reason why the unit heats up to 500 so it sparks immediately. After the powder sparks, it gets sent up and it’s cool to the touch. Sorry for the long explanation. Hope that helps!!
Hey L! Yes you can reuse the Cold Spark Machines. You just need to purchase more cold spark powder. I get mine from www.timbrownproducctions.com. Usually one bag can fill up all 4 units twice (which is how much I usually use for one event). Hope that helps! Cheers!
Hey for some reason the led won’t light up on one of my spark machines. It worked 1x then went out so it won’t turn on now and I can’t start it at all. Do you know how I could maybe solve this? I have an event super soon and really need help
Hey Cole! I’m so sorry that I probably didn’t get to you in time before your event. Wife found out she’s pregnant and been trying to catch up on the comments. Which LED light didn’t turn on? Was the left light blinking yellow when you pressed the “A” button on the remote? Did the temperature start to rise after that? Feel free to reach out to me if you have any questions: 6783503910. Cheers and sorry again I didn’t reach out sooner!
Hey DJ! I set my channels to "A001" and operate everything off one remote by setting one unit to Host (L- -H) and the rest mirrored (LN-H). Hope that helps man! Lemme know if you have any more questions! Cheers!
@@timbrownproductions11hey Tim! I’m trying this right now and I’m having no luck. Only machine is heating up but not the other one that the XLR is daisy chained to
I would try to flip it upside down and get as much powder as you can out. After doing that I’d turn on the unit and start the warming up (A button) while keeping an eye on it. When it comes to the target temperature you can press the B,C,or D buttons to run the units and see if the powder sparks out. Lemme know if that helps. I personally haven’t done it before. Cheers!
I’m sure there is a case that is smaller for a two units. Just make sure you select one that fits the dimensions of your cold sparkler unit. For example the 500Watt Unit measures: 8 x 7.3 x 10" (20 x 18.6 x 26 cm) And the 700Watt Unit measures: 9 x 7.6 x 12" (22.9 x 19.3 x 30.5cm) Pelican has a great selection and measurement calculator. Just make sure you add room for cushion/insulation when you measure for you units.
Hey Online Account! I think what happened to Unit 4 was that I didn’t clean it out entirely from a previous use at an event so the powder slightly clogged the wheel from turning. You can check this CZcams video of how I fixed it (czcams.com/video/L4NGnbfT-MU/video.html)
Hey slickback! I get mine from (www.timbrownproductions.com) I know there’s different brands like JMAZ, Blitz, ShowVen, and Baggysaxx. I would like to do a comparison of the powder on the next video I produce. I am currently working on a video that compares the power of the 700Watt vs the 500Watt units.
I got myself 4 of the 700w units and yesterday on 2/19/2023 I ran all as test and I could not run them in daisy chain connection also 1 of the unit kept losing its temperature. Can you help please. Thank you
Sorry for the late reply. My wife just found out we’re expecting a little one and have been trying to catch up on comments. :) (1) DMX : First thing I’d make sure that the DMX cable goes from “OUT” to “IN” (which I’m sure you’ve done) (2) Make sure the setting for the Host setting is “LN-H” and the rest of the units are in the mirrored setting “L- -H” ^^ I have another video that helps explain this (czcams.com/video/L4NGnbfT-MU/video.html) “How to fix VEVOR Cold Sparklers”
And as far as the 1 unit losing it’s temperature.. (1) check to make sure the powder isn’t clogged. (2) it might be a bad heating unit and you might need to contact VEVOR unfortunately. Heating elements go as time elapses. Like a hot tub’s heating coils, once the heating element is bad then it needs to be replaced. The good thing is that you bought it recently and can talk with VEVOR to see if there’s something they can do about replacements. Sorry I can’t help more! Thanks for your questions!
@@timbrownproductions11 Thank you for the reply and congratulations for the good news. All 4 units are working perfectly well, i guess they just had to go thru that first run cycle. Now the question is how to run them with dmx because i asked the vevor support and they are not helpful any at all, their manual doesn't have any dmx channel info either. For now I'm using the remotes.
Are you trying to run them to a DMX Controller? Or are you running them all off one remote? I haven’t attempted it with a controller but I would think if you want the units to have different timings you could manually change the DMX Channel on the back. Just haven’t gotten to that point yet because I’m a one-stop-shop wedding & event DJ. Haha. If you’re able to get it to work lemme know! Cheers
Hi Mariano Chavex. I've only used the Titanium Composite I've ordered from www.timbrownproductions.com. I've heard ShowVen has good Titanium Composite powder as well but it all gets expensive after a while. Let me know if you have any other questions! Cheers!
Hey 360 Booth! Thanks for reaching out! The cables are called Speak-On Cables and you can purchase them here: amzn.to/3INBrRN It's not exactly the same brand that VEVOR has as default but Jabra is pretty decent with their cables.
@@timbrownproductions11 Hey Tim ....THEY ARE NOT SPEAKON CABLES! Speakon Cables are SPEAKER CABLES.... These are called Powercon cables! These are designed for POWER, not speakers. The connectors look very similar but they are NOT THE SAME! Sorry for yelling! Don't want anyone to buy the wrong things or get injured using the wrong parts for any device. Carry on !
Hey GFire, yes and no the machines do continuous fire as long as there’s powder. For the VEVOR cold Sparklers, You can press the B, C, or D buttons to turn it on and then if you want to conserve the powder you can press the respective button again to turn it off. So you can use it as long as you want but conserving the powder for the duration of the event is the way I usually go. Hope this helps man! Cheers!
Hey CrystalVape. The cords should come with your purchase of the units but you should have DMX cables (if you want to daisy chain the units together) and Powercon Cables (can choose to have the daisy chained version or not)
Hi Betlenut, Sorry for the late response. Yes, the high setting would use powder more quickly as compared to the medium or low settings. So just keep that in mind. Hope that helps! Cheers!
Hey Budu, I think it was because I forgot to clean out the unit (use up all the powder from a previous use). The powder can become like cement if you don't use all of it and sits in the machine. I think that was what the problem was and it got a little clogged. Hope that Helps! Cheers Going to try to make a video on how to fix that issue.
@@bududash4918 You have to manually rotate the gears to get the powder out. It takes some work (wiggle it back and forth to start and make it easier on yourself). I'm making another video on that since I got so many questions. Cheers!
3 questions....What size of powder were you using? Small, Med or Large? Also curious about how loud those are for use as individual units or as a pair? They seem really really loud. And finally...what size units are you using here? I was considering buying 4 of the 700 watt versions but that noise may be more than I want to deal with. Any thoughts on this?
Hi Sheila! My titanium powder bags are 200g. I have an indoor or outdoor powder (basically the size of the grain - finer:indoor ; larger: outdoor) Yeah they seem very loud but my music covers the sound and you don’t notice it that much. I have the 500 watt version and only 4 units. I didn’t know any difference at the time.
I use dmx cables so I can make sure that ALL sparklers go off at the same time. I’ve found that if I have all set to the same remote, then there would be at least one of the units not going off with the other units. It looks weird when 3/4 units go off. So in response I choose to depend on dmx.
Sorry for the late reply @FOUR08DUMMY; VEVOR recommends that you only fill to the halfway (which lasts about 3-5mins) and you can refill afterwards. I think it's to prevent a vacuum (If there's no vent then it's hard for the powder to flow thru the unit). I tried filling it up all the way once and caused a backup and the unit didn't work properly. Which is another video I'm working on - "Troubleshooting VEVOR Cold Sparklers"
Great Question! I had no idea that you could do colors until this comment. I haven't tried it on my VEVOR cold sparklers. But I found a website that might be able to help ya! liuyangconfetti.com/collections/spark-machines/products/sf007-color-1-reusable-dmx-control-color-cold-pyro-machine
@@freshdumbhd239 wasnt a stupid quesion but was an asshole response. I don't know the specific of what makes these sparks but I'll say this fireworks produce all types of colors and heating different chemicals does produce different colors so it seems to me it would be possible to make different colored sparks. I imagine red white and blue would go great for a 4th of July party
@@mightyquinn5135 So you are writing a comment in which you say: "I dont know what sparks are and how they work" and you dare to even post this comment lol. Those are titanium alloy sparks, you can also use magnesium in some cases. Have you ever seen red sparks (not firework stars and other effects) or even blue sparks. I dont think so because almost only the flame changes in color when you use metalsalts. You can indeed make red sparks but only with diamond powder and erbium and some other rare-earth elements. All of that is quite expensive. -> red maybe greenish would be possible but for sure not blue, purple, white.
Hey Neymar Jr. They range from $388.99 to $1526.99 depending upon how many you want and which package. Here’s VEVOR’s website: (m.vevor.com/cold-spark-machine-c_11702/vevor-4pcs-large-cold-spark-machine-700w-dmx-stage-firework-machine-6-6-9-8ft-dj-p_010493702279)
Yeah mine still work! (I’ve had them since Nov 2021) I run the units out of powder every time so they don’t get stuck. First I’d check if the remote is paired up or if the infrared light is reading the remote. I’ve got another CZcams video that helps walk thru troubleshooting. czcams.com/video/L4NGnbfT-MU/video.html I’ve heard of some units heating mechanism not working. I’d reach out to VEVOR customer service. Hopefully they can help more! Sorry I couldn’t help more! Feel free to give me a call if you want (678)3503910.
Hey Lamont! Yeah I do rent them out in the Atlanta Area. (Haven't really gotten to great at shipping yet). Feel Free to reach out via text or phone! Cheers!
Hey Clearance Flips, the bags that I get can fill up 4 units up to 3 times each. Once filled the units can go for about 3-5 mins. I usually have them remote controlled and can spread the usage for a whole wedding. If you run them for a whole dance then you might need to refill them.
Hey Noe! It's the Pelican Storm iM2720 Case! Here's the link to Amazon: amzn.to/3zHljyY. Did a lot of research to have the smallest durable case that fit all 4 cold sparklers. Only thing was that the foam made it too tight for it to fit. So I took out all the foam except the bottom piece.
@@noeibarra8610 Good question. I just finished another youtube video which I'm about to upload. But sometimes if you overfill the powder then it gets stuck (too much powder at once). Also if the unit had powder from a previous use it can settle and make the unit get stuck, so try to use all the powder in the unit after you put the unit up. (LONG WINDED ANSWER) lol. Hope that helps!
Hi Aravind. Thanks for reaching out! I'm not too sure if I can ship to India but shoot me an address on the website (www.timbrownproductions.com) and I can check it out! Cheers Aravind!
Yeah Like @CharlieLopez said. I'm doing a simple setup. I haven't gotten that far to use on a DMX Controller. I want to get further and work on my setup to be wireless but haven't gotten time off my FTE work.
You think they would use something besides a loud ass blender motor. I've been looking for something like this but after hearing that that's going to be a no-go I guess I will stick to some dry ice.
Yeah it is pretty loud. But with speakers it kinda masks it and everyone usually is in awe of it (clapping and yelling for send offs, etc). But yeah low lying fog is definitely quieter. Cheers!
You have the best video on CZcams in Vevor cold sparkle machine
Thanks so much!! We really appreciate the feedback!! Sorry for the late reply btw!
Trust me I bought my sparkler machines, watched this video, took my first event and since then it’s been one event to the next
2 Things: I saw the far left machine started to loose it's height a lot quicker than the other 3. Is there something we should make sure we do so that doesn't happen? Secondly, Does the wattage of the machine you buy matter? If so, what is the difference in regards to wattage? Is it simply the intensity of the sparkler effect?
Hey Karefreeonthebeat, I think the far left machine had some powder left in the unit from a previous use, which made the gears spin slower, and not use as much powder.
In regards to wattage, I’m currently in the making of another video - Comparing the VEVOR 500W vs 700W Cold Sparklers. I’ve just been a little tied up. But there is definitely a difference. The 700 Watt is a bigger machine and felt like it burned a little hotter, which is good for the machine to burn all the remaining powder. I’ll be sure to post it soon.
I would love to see a video on taking it apart to fix the clog.
Thanks Nicholas, Yeah I'll try to set aside some time to take it apart and back together. I created a video to help troubleshoot at the end of the video there's another video "Troubleshoot & Fix Vevor Cold Sparklers."
Great video , thanks for posting. Being absolutely bran new to this, a couple of questions. I am assuming you are using the 500W in you video. if you hook it up to a DMX board and it say 2 channels needed ( one for heat) how do you select the "b, c, d" height, and how long ( typically ) would a full fill last on high?
Very helpful and out going guy thank you
No Problem! Glad it helped Donnie!
thank you bro God Bless
Great video brother. I have a question. How much powder is use for every use & how long does it last?
Thanks in advance
Can shoot the sparks in short bursts? For example shoot for 10 seconds wait a min shoot for 10 more?
Also is there a way to know when the powder is getting low or do you just wait till it no longer sparks. And once you use up the powder can you refill immediately or do you need to wait for the unit to cool?
Does these set off fire alarms indoors?
I purchased 2 of these and tried using with remote alone (no dmx controller). I paired remote to both machines and did not daisy chain them. What a disaster. They do not always simultaneously respond to the remote commands and then go back and forth as I am trying to turn both off. I want to see if daisy chaining them will work better. Do you know how I would unpair the second one from the remote?
Hey Justin. Sorry just now getting to your comment. My wife and I just found out we’re expecting a little one and haven’t gotten to all the comments. Check this CZcams video (czcams.com/video/L4NGnbfT-MU/video.html) might help explain everything.
I had the same thing happen to me when I started. The units are capable of being pair with any of the remotes, so to get around this I just used the DMX cables, and made one unit the Host (LN-H) and the rest mirrored (L- -H). The video I linked is one I made to help walk anyone thru the process of daisy chaining the DMX cable.
Thank you for sharing this video
Great video. I do have a question reguardi g the case. Will it hold 4 of the bigger 700w cold park by vevor? Or do you know any similar case that does ?
Sorry for the late reply. That’s a good question. I’m not sure about the dimensions of the 700W cold sparklers. I’d imagine if the units are a little larger, then it wouldn’t fit. I measured my units, multiplied that by 4, and found the best Pelican case that would fit all units. Hope that helps! Sorry I don’t know the 700W version’s dimensions.
Never knew about cold sparklers, that's really cool!
Thanks! I'm glad this video helped! Let me know if you have any questions! Cheers!!
Are these safe to run indoors? If so, why do the machines need to heat up so much I thought the sparks were cold?
Hi @roamck9829! Yes these are safe to run indoors. There’s indoor and outdoor powder. Indoor is a bit more fine and outdoor is a little larger grit of Titanium powder. Outdoor powder can go higher and produce more spark. But both are safe to touch and are fine indoors.
The machines heat up to 500 degrees so that when the powder touches the hot unit, it sparks immediately and gets sent upward. Imagine lighting a wedding sparkler wand with a match (it takes a while) as compared to a torch (lights immediately). That’s the reason why the unit heats up to 500 so it sparks immediately. After the powder sparks, it gets sent up and it’s cool to the touch.
Sorry for the long explanation. Hope that helps!!
That’s incredibly helpful, thank you so much!!
Hello, i have a question.
Can you reuse them and if yes, how much you can reuse?
Hey L! Yes you can reuse the Cold Spark Machines. You just need to purchase more cold spark powder. I get mine from www.timbrownproducctions.com.
Usually one bag can fill up all 4 units twice (which is how much I usually use for one event).
Hope that helps! Cheers!
Great video! Thank you so much for taking the time to share you knowledge!
Hey for some reason the led won’t light up on one of my spark machines. It worked 1x then went out so it won’t turn on now and I can’t start it at all. Do you know how I could maybe solve this? I have an event super soon and really need help
Hey Cole! I’m so sorry that I probably didn’t get to you in time before your event. Wife found out she’s pregnant and been trying to catch up on the comments.
Which LED light didn’t turn on? Was the left light blinking yellow when you pressed the “A” button on the remote? Did the temperature start to rise after that?
Feel free to reach out to me if you have any questions: 6783503910. Cheers and sorry again I didn’t reach out sooner!
Question bro the Daisy chains connection you did with the dmx you went from 001 to what the next 3 what channels?
Hey DJ! I set my channels to "A001" and operate everything off one remote by setting one unit to Host (L- -H) and the rest mirrored (LN-H). Hope that helps man! Lemme know if you have any more questions! Cheers!
@@timbrownproductions11 thanks I’ll try!
@@timbrownproductions11hey Tim! I’m trying this right now and I’m having no luck. Only machine is heating up but not the other one that the XLR is daisy chained to
So… I put the powder in the wrong hole… is there a way to get it back out. This machine has never been turned on.
I would try to flip it upside down and get as much powder as you can out. After doing that I’d turn on the unit and start the warming up (A button) while keeping an eye on it.
When it comes to the target temperature you can press the B,C,or D buttons to run the units and see if the powder sparks out. Lemme know if that helps. I personally haven’t done it before. Cheers!
Very Informative... is there a smaller case for 2 units
I’m sure there is a case that is smaller for a two units. Just make sure you select one that fits the dimensions of your cold sparkler unit.
For example the 500Watt Unit measures:
8 x 7.3 x 10" (20 x 18.6 x 26 cm)
And the 700Watt Unit measures:
9 x 7.6 x 12" (22.9 x 19.3 x 30.5cm)
Pelican has a great selection and measurement calculator. Just make sure you add room for cushion/insulation when you measure for you units.
What happened to Unit 4 on the left? It didnt really go off?
Hey Online Account! I think what happened to Unit 4 was that I didn’t clean it out entirely from a previous use at an event so the powder slightly clogged the wheel from turning. You can check this CZcams video of how I fixed it (czcams.com/video/L4NGnbfT-MU/video.html)
Do you know if can use any titanium powder for these machines? I am only seeing powder in the brand of JMAZ.
Hey slickback! I get mine from (www.timbrownproductions.com)
I know there’s different brands like JMAZ, Blitz, ShowVen, and Baggysaxx. I would like to do a comparison of the powder on the next video I produce. I am currently working on a video that compares the power of the 700Watt vs the 500Watt units.
I got myself 4 of the 700w units and yesterday on 2/19/2023 I ran all as test and I could not run them in daisy chain connection also 1 of the unit kept losing its temperature. Can you help please. Thank you
Sorry for the late reply. My wife just found out we’re expecting a little one and have been trying to catch up on comments. :)
(1) DMX :
First thing I’d make sure that the DMX cable goes from “OUT” to “IN” (which I’m sure you’ve done)
(2) Make sure the setting for the Host setting is “LN-H” and the rest of the units are in the mirrored setting “L- -H”
^^ I have another video that helps explain this (czcams.com/video/L4NGnbfT-MU/video.html)
“How to fix VEVOR Cold Sparklers”
And as far as the 1 unit losing it’s temperature.. (1) check to make sure the powder isn’t clogged. (2) it might be a bad heating unit and you might need to contact VEVOR unfortunately.
Heating elements go as time elapses. Like a hot tub’s heating coils, once the heating element is bad then it needs to be replaced. The good thing is that you bought it recently and can talk with VEVOR to see if there’s something they can do about replacements.
Sorry I can’t help more! Thanks for your questions!
@@timbrownproductions11 Thank you for the reply and congratulations for the good news. All 4 units are working perfectly well, i guess they just had to go thru that first run cycle. Now the question is how to run them with dmx because i asked the vevor support and they are not helpful any at all, their manual doesn't have any dmx channel info either. For now I'm using the remotes.
Are you trying to run them to a DMX Controller? Or are you running them all off one remote? I haven’t attempted it with a controller but I would think if you want the units to have different timings you could manually change the DMX Channel on the back. Just haven’t gotten to that point yet because I’m a one-stop-shop wedding & event DJ. Haha. If you’re able to get it to work lemme know! Cheers
What brand you recommend Composit Powder For Cold Spark Firework
Hi Mariano Chavex. I've only used the Titanium Composite I've ordered from www.timbrownproductions.com.
I've heard ShowVen has good Titanium Composite powder as well but it all gets expensive after a while. Let me know if you have any other questions! Cheers!
Thank you for sharing. I was not able to find the power cord to execute the daisy chain effect. Where may I purchase them?
Hey 360 Booth! Thanks for reaching out! The cables are called Speak-On Cables and you can purchase them here: amzn.to/3INBrRN
It's not exactly the same brand that VEVOR has as default but Jabra is pretty decent with their cables.
@@timbrownproductions11 Hey Tim ....THEY ARE NOT SPEAKON CABLES! Speakon Cables are SPEAKER CABLES.... These are called Powercon cables! These are designed for POWER, not speakers. The connectors look very similar but they are NOT THE SAME! Sorry for yelling! Don't want anyone to buy the wrong things or get injured using the wrong parts for any device. Carry on !
@@sheilasmith8844 ooops! Thanks for the clarification! I’ll fix that on the description. Thanks for leaving the comment!!
Hey bro are these machines continuous fire until they run out of powder?
Hey GFire, yes and no the machines do continuous fire as long as there’s powder. For the VEVOR cold Sparklers, You can press the B, C, or D buttons to turn it on and then if you want to conserve the powder you can press the respective button again to turn it off. So you can use it as long as you want but conserving the powder for the duration of the event is the way I usually go. Hope this helps man! Cheers!
@@timbrownproductions11 thanks Tim.
What wires are required please
Hey CrystalVape. The cords should come with your purchase of the units but you should have DMX cables (if you want to daisy chain the units together) and Powercon Cables (can choose to have the daisy chained version or not)
Will powder last longer if you run it on low versus medium or high?
Hi Betlenut, Sorry for the late response. Yes, the high setting would use powder more quickly as compared to the medium or low settings. So just keep that in mind. Hope that helps! Cheers!
The last one why seen correctly, what the last sparkular problem??
Hey Budu, I think it was because I forgot to clean out the unit (use up all the powder from a previous use). The powder can become like cement if you don't use all of it and sits in the machine. I think that was what the problem was and it got a little clogged. Hope that Helps! Cheers
Going to try to make a video on how to fix that issue.
@@timbrownproductions11 I also face the
Problem this type, what is the solution for the sparkular
@@bududash4918 You have to manually rotate the gears to get the powder out. It takes some work (wiggle it back and forth to start and make it easier on yourself).
I'm making another video on that since I got so many questions. Cheers!
@@bududash4918 Try checking out my other video to troubleshoot / fix the cold sparklers. czcams.com/video/L4NGnbfT-MU/video.html
3 questions....What size of powder were you using? Small, Med or Large? Also curious about how loud those are for use as individual units or as a pair? They seem really really loud. And finally...what size units are you using here? I was considering buying 4 of the 700 watt versions but that noise may be more than I want to deal with. Any thoughts on this?
Hi Sheila! My titanium powder bags are 200g. I have an indoor or outdoor powder (basically the size of the grain - finer:indoor ; larger: outdoor)
Yeah they seem very loud but my music covers the sound and you don’t notice it that much.
I have the 500 watt version and only 4 units. I didn’t know any difference at the time.
they all make noise
why is he using dmx cables ?
I use dmx cables so I can make sure that ALL sparklers go off at the same time. I’ve found that if I have all set to the same remote, then there would be at least one of the units not going off with the other units. It looks weird when 3/4 units go off. So in response I choose to depend on dmx.
Which pelican case is that?
Hey Rett, It's a Pelican Storm iM2720 Case.
Here's a link to the amazon store where I bought mine: amzn.to/3zHljyY
Time wise how long does one bag last?
Sorry for the late reply @FOUR08DUMMY; VEVOR recommends that you only fill to the halfway (which lasts about 3-5mins) and you can refill afterwards. I think it's to prevent a vacuum (If there's no vent then it's hard for the powder to flow thru the unit).
I tried filling it up all the way once and caused a backup and the unit didn't work properly. Which is another video I'm working on - "Troubleshooting VEVOR Cold Sparklers"
How much
Can you get colored powder for these? To make the sparks like red etc.?
Great Question! I had no idea that you could do colors until this comment. I haven't tried it on my VEVOR cold sparklers. But I found a website that might be able to help ya! liuyangconfetti.com/collections/spark-machines/products/sf007-color-1-reusable-dmx-control-color-cold-pyro-machine
What a stupid question xD Sparks will always be sparks so they emit yellowish/white/red light...
@@freshdumbhd239 wasnt a stupid quesion but was an asshole response. I don't know the specific of what makes these sparks but I'll say this fireworks produce all types of colors and heating different chemicals does produce different colors so it seems to me it would be possible to make different colored sparks. I imagine red white and blue would go great for a 4th of July party
@@mightyquinn5135 So you are writing a comment in which you say: "I dont know what sparks are and how they work" and you dare to even post this comment lol. Those are titanium alloy sparks, you can also use magnesium in some cases. Have you ever seen red sparks (not firework stars and other effects) or even blue sparks. I dont think so because almost only the flame changes in color when you use metalsalts. You can indeed make red sparks but only with diamond powder and erbium and some other rare-earth elements. All of that is quite expensive. -> red maybe greenish would be possible but for sure not blue, purple, white.
Hey Tim how to reach you. I have a question
Hey Quess, More than happy to try to help! I'm usually free in the afternoons around 5PM EST. Here's my number: +1(678)350-3910
I'm A DJ Nice Tutorial. 🎵 🎶
How much for this machine
Hey Neymar Jr. They range from $388.99 to $1526.99 depending upon how many you want and which package. Here’s VEVOR’s website:
(m.vevor.com/cold-spark-machine-c_11702/vevor-4pcs-large-cold-spark-machine-700w-dmx-stage-firework-machine-6-6-9-8ft-dj-p_010493702279)
are these still working for u.... bought a set and they don't heat up anymore... only used 2 times?
Yeah mine still work! (I’ve had them since Nov 2021) I run the units out of powder every time so they don’t get stuck.
First I’d check if the remote is paired up or if the infrared light is reading the remote. I’ve got another CZcams video that helps walk thru troubleshooting. czcams.com/video/L4NGnbfT-MU/video.html
I’ve heard of some units heating mechanism not working. I’d reach out to VEVOR customer service. Hopefully they can help more! Sorry I couldn’t help more! Feel free to give me a call if you want (678)3503910.
Do you rent them out
Hey Lamont! Yeah I do rent them out in the Atlanta Area. (Haven't really gotten to great at shipping yet).
Feel Free to reach out via text or phone! Cheers!
🔦
🎉
How long does a bag last you and more details o. Run time can these be continuous or how does it go
Thanks !
Hey Clearance Flips, the bags that I get can fill up 4 units up to 3 times each. Once filled the units can go for about 3-5 mins. I usually have them remote controlled and can spread the usage for a whole wedding. If you run them for a whole dance then you might need to refill them.
@@timbrownproductions11 awesome thanks !!!
@@timbrownproductions11 just added you on tik tok ! Great content way more desccriptive than other vids !
Where did you get the case from? I need one
Hey Noe! It's the Pelican Storm iM2720 Case! Here's the link to Amazon: amzn.to/3zHljyY. Did a lot of research to have the smallest durable case that fit all 4 cold sparklers. Only thing was that the foam made it too tight for it to fit. So I took out all the foam except the bottom piece.
@@timbrownproductions11 thank you so much.
@@timbrownproductions11 i used them the other day. And got a low spark. How do you fix that?
@@timbrownproductions11 sorry to bother your, has the temperature on the machine dropped on you while waiting to use them. If so how did you fixed it?
@@noeibarra8610 Good question. I just finished another youtube video which I'm about to upload. But sometimes if you overfill the powder then it gets stuck (too much powder at once). Also if the unit had powder from a previous use it can settle and make the unit get stuck, so try to use all the powder in the unit after you put the unit up. (LONG WINDED ANSWER) lol. Hope that helps!
Hi
Hi Ajay!
Hallo Tim was hast du für Stecker das viedeo ist top wir haben schucka stecker
HI im from chennai, India how can i buy
Hi Aravind. Thanks for reaching out! I'm not too sure if I can ship to India but shoot me an address on the website (www.timbrownproductions.com) and I can check it out! Cheers Aravind!
Rental prices?
Hey Anna! I rent them out for $200 per unit, plus the cost for the bags of titanium powder.
SO all-in rental costs about $1000.
What dmx controller did you use?
He doesn’t use a dmx controller he uses that controller that comes with the sparklers
Yeah Like @CharlieLopez said. I'm doing a simple setup. I haven't gotten that far to use on a DMX Controller. I want to get further and work on my setup to be wireless but haven't gotten time off my FTE work.
That last machine did not work well.
Great Video, But Man They make Noise!!
Yeah Sorry about that I should have lowered the audio levels. For some reason my mic didn't work on this video. First tutorial. Learned a lot. haha!
You think they would use something besides a loud ass blender motor. I've been looking for something like this but after hearing that that's going to be a no-go I guess I will stick to some dry ice.
Yeah it is pretty loud. But with speakers it kinda masks it and everyone usually is in awe of it (clapping and yelling for send offs, etc). But yeah low lying fog is definitely quieter. Cheers!