Ford F250 Front Disc Brakes - 1972 Ford F250 Brake Pad Replacment
Vložit
- čas přidán 6. 01. 2019
- I visit my friend Roy and help him change the brake pads on my 1972 3/4 ton F250. It was harder than you would imagine. The caliper bolts were rusted on pretty good and took some time to break free. Thanks for watching!
- Auta a dopravní prostředky
Love them old Ford trucks.
They are pretty cool Terry! Thanks for watching sir!
I'm enjoying your videos. I had an F250 about the same year back in the 80s. Also drove my brothers 63 VW Bug in 68 when he was in the service. I was 18 at the time.
WOW! That is really cool man! I love the old ford trucks and the old VWs! Thanks for watching my videos Jerry! Did you subscribe and click he bell?
@@CTmoog Yep, subbed and belled.
Thanks man!
Can't help but like the way you ended the video
Your friend has a couple of nice trucks there ! I like the old Fords and yes have run into that same problem a couple of times . They're sometimes quite stubborn . Glad he could get you fixed up .
Yes, he had a ton over the years and been working on them forever. It's nice to have him for advice. Yes, they were on there preys bad and when we put everything back together the inside of the passenger side rim wash rubbing on the top of the caliper. Not sure why but it wasn't good. We had to add washers on top of the wheel spacer....
You most likely have checked this but if he used a pry bar on that side it may have pulled the caliper slightly up out of it's resting points if so it might settle in after driving .
Nice car
good as new
She's good to go! We might change the timing chain and water pump next month!
I wish I can get ole swamp dragon to put together. I miss swap dragon
How do you replace the caliper and rotor? One of my caliper is seized and I have no idea of replacing the rotor or caliper!?
What is the light all the way to the left below the steering wheel? My 72 F250 had that and I never figured out what it was for.
corvettebob that light turns on when there's something wrong with the hydraulic pressure in the brake lines
Cheap guys 😮no the right tools and the shoes 😮
Slickin served a purpose. Yah.
I know! Roy is a pretty col dude! Thanks for watching Jerry! Matt!
careful using crow bar on caliper pistons
Can you put these cars on the road
What about Pollution Under Control certificate
How can these cars get one
cars and trucks have to abide by emission laws that were in place when the original motor was built. if you swap a newer motor into an old truck, you have to follow that motors emission laws
@@stevenchoateracing3087 OK 😎