Tied the Alberto backwards, ALMOST always your mono/flouro is thicker than your braid. Wrap braid around mono!!!! IMPORTANT that the wrapping line exits the "loop" to the same side it entered. For offshore we tie a lot of 40 or 50lb flouro to 30lb braid. Could you imagine trying to wrap 40 lb flouro around braid?? Good luck with that!
I do this one immediately... In my life I always do the double albright knot with satisfaction and a minimal mistakes on a spinning fishing session... but this one appear more accurated and even with a small diameters such as in an eging braid and mono is easy to see every turn of the lines. Thanks a lot 👍🏻
Looks like a great knot but the albright seems a lot quicker and easier. I also feel wrapping the braid around the mono makes the knot stronger and gives it a lower profile.
@@stevensands33 Mono has higher abrasion resistance than braid because it's a single filament. Since braid is woven from many individual fibers once a few of them are compromised there's more and more stress on the remaining fibers and they just give out. In the case of leader knots you want the mono on the outside taking the hits against the guides unless it's much, much thicker than the braid.
@@pizzarat3275 ok but performance wise braid out performs mono in these scenarios still. I’ll take a few frayed brands of braid over fresh mono in any situation. If you guys are talking about giant mono for saltwater fish then I guess it wouldn’t matter. I’m taking light lines.
Iv done it your way and my tag end tends to point up and away from the reel causing the tag to wrap around my guides. was thinking maybe this would make the tag point towards my reel so if it duz snag it will snag on when i reel in which would be more manageable. Right?
Smaller the knot the better! May be fine with bigger pole eyelets but for me FG is the bomb and double uni are my go tools but I like to learn new things...nice video
FG is great! Like the Bimini Twist really lost its popularity due to its level of complexity. Complexity in general leads to error. Great knot lots of practice. 3:51
I would never use a double uni. The Albero knot is easier to tie, smaller, and twice as strong I use is on all lines that are about the same diameter, To tie heavy leader to braid the FG is the ONLY way to go.
Great knot but would never put a flame near my line. If you look closely You can see the melting of the mono/ flouro at the knot. It’s unnecessary and can only weaken the line. Especially if you are bouncing on the waves. Your method looks simple and quick other than the fire. Thank you I’m going to try it
Once I learned the FG there’s no going back, except for a quick tie-on when I’m in an awkward position, then I’ll use the improved Albright. Nothing beats the low profile and strength of the FG, especially when you’re using line of any thickness
@forrhs8430 I can't disagree with you. I have been using it for the last 4 years. I sat at home for the better part of a year watching the BASS live events and the MLF live events on the TV/phone and tied the knot with line I was planning on donating until I felt I had it down to where I could fish it in a tournament. It was taking about 2 to 3 minutes to tie it aside from the fact that it would take two or three tries before it actually worked. Now, it takes about 30 seconds, and it won't affect my fishing.
Yeah Ill stick with the Alberto. Been using it for over a decade with out a problem. Its simple, fast, and hard to get wrong. It may not be the strongest knot but Im fishing for bass, not Atlantic blue marlin. Try tying this knot or knots like the FG on a windy day on a pitching bass boat in foot rollers. Good luck!
I use that knot and I’ve had huge black tip sharks and it’s never ever once broke off always breaks off at my snap snivel. Even if I get snagged on the reef it’s never has broken off
fg is the strongest knot you can tie without a bobbin and the only leader to braid knot i would ever use. most people won't need it. alberto is a northeast surfcaster and he needed something he can tie out on a rock at night when the waves are breaking around you. as far as i know he's caught more 50 lb stripers from shore than any man alive.
This is the best lead feeds smooth casting barely can tell switch I'm just beginning but as all beginners learning a whole lot about knots looking forward to much more tips and ??? WWay CCool thanks
This is a great knot I have used for 10 years. You need to tie the braid in a loop with a knot and do a half granny knot on the leader. If these steps aren’t done your knot won’t be as strong. I’ve spent many hours testing knots to prove it.
I needed to learn how to tie a leader to braid and just started trying things and this is what i eventually came up with except i double up both lines. Glad i know what its called now
The proper Alberto is knot is my favorite knot. I use it every time I fish. If I free line it’s the Alberto knot 100% of the time. Super strong and easy on the guides.
This looks like an Alberto knot to me just wrapping the flouro around the braid instead of the other way around, Doesn't look like a good knot to me but I will test is and see if it is worth using.
knots such as this are not so easy to do on the bank or in the boat with the wind howling into your face, for this reason I find that a simple 6 wrap surgeons knot is much easier to do when I am attaching my fluorocarbon leader to my braid
Thankyou I was always breaking off now that I know the correct way I will be ok thanks man I'm going to use that connection of lines when needed appreciate you thanks
Yeah I’m gonna pack gloves and put them on every time I want to tie on a leader. I use Albright knot, no gloves, 60 seconds and I’m fishing and haven’t had a failure in 20 plus years.
Simple knots work fine for inshore fishing. Its about teeth and abrasion. Surgeons knot works fine tied in 10 seconds. Then I use FC with a renzetti finish for light freshwater.
Seems like a modified becket bend or sheet bend knot. The only difference is instead of wrapping the smaller diameter line around the bite of bigger diameter once, you did it many times and then retraced it and THEN put it back through the loop. Very interesting I'll definitely be using this from now on
Great demo except it would be better if you lubed up the line before you start pulling on the lines! Will help prevent burning the mono from the friction.
So many knot vids.....many are similar in nature & look effective. My only problem with braided(20lb) main to fluorocarbon(~8lb) leader....these smaller diameter lines are IMO more difficult to tie with some of these videos....if not the double uni...it's a swivel which also prevents line twist for the win.
узел морковка обычно прри вязании плетеным шнуром идет обмотка вокруг флурокармоного шоклидера. У вас наоборот обкручиваете флурокарбоном вокруг плетеногошнура.
I have had 400 pound + fish on an FG knot, 80lb braid to 80lb floro/wire rigs. Rod will break before the knot would give. Yes, use gloves to fully tighten knot. Melt floro end with lighter so you have a small nub. Finish with half hitches. super glue the knot where it does not overlap the floro...if you have time. This works for all sizes of braid to floro, I use it with 10lb braid to 20lb floro inshore. Will not fail if tied correctly.
Thanks! this is a handy one, fresh or salt water.
can be applied in both places
@@FishingknotsChannel ❤❤❤❤❤❤❤😊
I did this knot while fishing in the morning on my kayak, by the time i finished i had unknowingly floated 900 miles out to sea
😂😂👌
🤠😆👍
Figured that happened with an FG.
😂😂😂😂😂😂😂
Tied the Alberto backwards, ALMOST always your mono/flouro is thicker than your braid. Wrap braid around mono!!!! IMPORTANT that the wrapping line exits the "loop" to the same side it entered. For offshore we tie a lot of 40 or 50lb flouro to 30lb braid. Could you imagine trying to wrap 40 lb flouro around braid?? Good luck with that!
A great piece of advice.
Yeah man I wouldn't want that fat chunk of fluoro blasting thru my guides
Pass the tag end through the loop opposite direction it first entered and ya got the Albright
I thought the exact same thing!
Crazy Alberto is my go-to knot.
I have used this Carrot knot in conjunction with the Bimini Twist for over 50 years, and never had a fail !.
I'd love to know more about the process on that. Could you explain in more detail what it looks like from braid to bumper fluoro? 👍🏻
Good knot. Not sure but I believe it's called the Alberto knot.
Yes it’s albernot
Alberto is braid wrapped around Mono , this is mono around braid .... Yeah cool but thicker than the original
I do this one immediately...
In my life I always do the double albright knot with satisfaction and a minimal mistakes on a spinning fishing session... but this one appear more accurated and even with a small diameters such as in an eging braid and mono is easy to see every turn of the lines.
Thanks a lot 👍🏻
Я пользовался узлом Олбрайт до того, как узнал про узел Морковка.
Морковка получатся тоньше и надежнее, узел Олбрайт у меня нередко распускался.
This is the Albright knot in reverse. Instead of wrapping the braid around the mono, you wrap the mono around the braid. Brilliant!
The Albright does not wrap over itself like this one does. You may be thinking of the Alberto and not Albright
The Albright we use to tie our top shot for cod fishing. We like to call it the baccala knot.😊
Albright Is better for heavier monofilament
This knot looks easier for my old arthritis fingers 😊
Looks like a great knot but the albright seems a lot quicker and easier. I also feel wrapping the braid around the mono makes the knot stronger and gives it a lower profile.
On top of that the braid protects the leader through the guides. If an albright breaks it was tied extremely wrong.
@@stevensands33 What drugs are you smoking son?
Mono is far more abrassive resistant than braid.
@@CHOPERUS23 lol what? Mono is much weaker than braid. There isn’t really much else to say.
@@stevensands33 Mono has higher abrasion resistance than braid because it's a single filament. Since braid is woven from many individual fibers once a few of them are compromised there's more and more stress on the remaining fibers and they just give out. In the case of leader knots you want the mono on the outside taking the hits against the guides unless it's much, much thicker than the braid.
@@pizzarat3275 ok but performance wise braid out performs mono in these scenarios still. I’ll take a few frayed brands of braid over fresh mono in any situation. If you guys are talking about giant mono for saltwater fish then I guess it wouldn’t matter. I’m taking light lines.
Awesome now I am done with fg knot thank God 💚💚💚💚💚
Fg knott is king
All backwards. Braid around mono or floro. And top of carrot goes towards reel. So you can cast without getting hung up.
Iv done it your way and my tag end tends to point up and away from the reel causing the tag to wrap around my guides. was thinking maybe this would make the tag point towards my reel so if it duz snag it will snag on when i reel in which would be more manageable. Right?
Smaller the knot the better! May be fine with bigger pole eyelets but for me FG is the bomb and double uni are my go tools but I like to learn new things...nice video
FG is great! Like the Bimini Twist really lost its popularity due to its level of complexity. Complexity in general leads to error. Great knot lots of practice. 3:51
I would never use a double uni. The Albero knot is easier to tie, smaller, and twice as strong I use is on all lines that are about the same diameter, To tie heavy leader to braid the FG is the ONLY way to go.
Braid should wrap around the leader as it will go through the rings better and the reel
Carrot = Alberto….Great knot! When casting jigs for walleye my trilene knot at the jig will fail on snags and the Alberto never lets go.
Without even talking, dude is able to teach us how to tie these knots. Thank you so much for your content.
I like the double uni knot.
Thanks!
Great knot but would never put a flame near my line. If you look closely You can see the melting of the mono/ flouro at the knot. It’s unnecessary and can only weaken the line. Especially if you are bouncing on the waves. Your method looks simple and quick other than the fire. Thank you I’m going to try it
Mushrooms are necessary on lots of knots. If you wet the line and use your nails to gaurd the knot it is completely fine.
Exactly!!!! It's perfectly safe and better too! A little caution and you good!@@badm.d
I like the knot for sure looks simple enough to tile. I will play with it but the FG knot is still my go to.
Once I learned the FG there’s no going back, except for a quick tie-on when I’m in an awkward position, then I’ll use the improved Albright. Nothing beats the low profile and strength of the FG, especially when you’re using line of any thickness
But the FG knot is so damm cumbersome to tie
@forrhs8430 I can't disagree with you. I have been using it for the last 4 years. I sat at home for the better part of a year watching the BASS live events and the MLF live events on the TV/phone and tied the knot with line I was planning on donating until I felt I had it down to where I could fish it in a tournament. It was taking about 2 to 3 minutes to tie it aside from the fact that it would take two or three tries before it actually worked. Now, it takes about 30 seconds, and it won't affect my fishing.
Sama kuatnya FG knot, tp ini lebih mudah
Perfeição !!!!!! Top !!!!
It’s just like the Alberto knot. Way easier wrapping braid over Flouro just FYI for guys trying this knot.
Terima kasih perkongsiannya bang...Salam satu hobby🤝🏽
I usually wrap the braid around the mono,don’t know which is stronger but works well.
Would be slimmer too?
Braid around mono is better. Braid digs into mono and the knot will be skinnier.
A allegory for “there’s a right way to do things and a wrong way to do things”.
-reverse Alberto Knot, you can see the damage line on the left.
Awesome and super easy to tie !!! I'll be trying it next trip out, next week! TYVM!!!
Improved albright knot.
You need to do it in reverse like the Alberto Knot. The tag end doesn’t catch on the eyes when casting. Wrap the braid around the fluorocarbon.
Thank you for sharing my friend new friend watching
Thnks brother 🤙🤙🤙
Mantep sekali cari ngiteket nya 👍👍👍
great sir, greetings from indonesian fishing
Thanks brother
Looks like a improved Albright knot
Oh again. Loon UV Knot Sense is the shit for finishing knots. No melting, no super glue, no BS. You all have a lot to learn.
nice tune
Yeah Ill stick with the Alberto. Been using it for over a decade with out a problem. Its simple, fast, and hard to get wrong. It may not be the strongest knot but Im fishing for bass, not Atlantic blue marlin. Try tying this knot or knots like the FG on a windy day on a pitching bass boat in foot rollers. Good luck!
I use that knot and I’ve had huge black tip sharks and it’s never ever once broke off always breaks off at my snap snivel. Even if I get snagged on the reef it’s never has broken off
fg is the strongest knot you can tie without a bobbin and the only leader to braid knot i would ever use. most people won't need it. alberto is a northeast surfcaster and he needed something he can tie out on a rock at night when the waves are breaking around you. as far as i know he's caught more 50 lb stripers from shore than any man alive.
This IS the Alberto! FG is better for heavy mono.
Ikatan nya Sangat bagus kuat dan rapih Mr🤔👍🎣🔔💪
Thanks
😂😂😂😂 hardy you learn a hard way bruuuu 😂😂
This is the best lead feeds smooth casting barely can tell switch I'm just beginning but as all beginners learning a whole lot about knots looking forward to much more tips and ??? WWay CCool thanks
Excellent knot
🙏🙏
Great video thanks .😊
This is a great knot I have used for 10 years.
You need to tie the braid in a loop with a knot and do a half granny knot on the leader.
If these steps aren’t done your knot won’t be as strong. I’ve spent many hours testing knots to prove it.
I needed to learn how to tie a leader to braid and just started trying things and this is what i eventually came up with except i double up both lines. Glad i know what its called now
Wow, that is quick knot to tie. I will remember this when I need to rigged up quick.
Thank s for show another ways of method to tide the knot 2 different kinds of lines👍👍up.
The proper Alberto is knot is my favorite knot. I use it every time I fish. If I free line it’s the Alberto knot 100% of the time. Super strong and easy on the guides.
This looks like an Alberto knot to me just wrapping the flouro around the braid instead of the other way around, Doesn't look like a good knot to me but I will test is and see if it is worth using.
@@FishNFoolLures You should knot wrap with the flouro, wrapping with the braid protects the flouro line from abrasion.
,Bom dia.🎣🐟💪🎣💯👏👏👏👏👏👏👏🎣👍👍👍
knots such as this are not so easy to do on the bank or in the boat with the wind howling into your face, for this reason I find that a simple 6 wrap surgeons knot is much easier to do when I am attaching my fluorocarbon leader to my braid
Always use Berkley because it is always a good line. Never has failed me. Also, made in the USA which is important to me.
The braid should be wrap around and biting to flouri leader, not the other way around
We call it the Crazy Alberto knot
thanks best knot ever and esay thanks a lot
the best braid to nylon i have ever seen. Thank you
Check the Albright knot out then it's even easier to tie.
Muy bueno 👍 Pero el nudo siempre deforma la linea adelgazándola en alguna parte, se ve claro al final del video. ✅
Improved Albright been tying it for years. And no way it's 1000 x stronger that the line
In some places this knot is called the Alberto Knot.
It's called the Alberto Knot tied incorrectly.
@@ebisu8824 LOL....exactly...this ain't no alberto... Improved bristol is the common name.
Alberto knot
Thanks )
Youre welcome 👋👋👍👍
Wonderful! I think it is strong like the F.G knot
Thanks for the video. I learned that as being the worm knot.
I wonder what breaking strain versus the uni knot ?
Thanks for sharing
Thankyou I was always breaking off now that I know the correct way I will be ok thanks man I'm going to use that connection of lines when needed appreciate you thanks
thank you, the fishing knot is very good and easy to apply
looks like a reverse albright knot, would be interesting to see which is strongest of the two
Looks nice and smooth..but wouldn't trust it over my FG knot.
It lacks a double half hitch locking knot at the end 😅
The fluorocarbon looked very stressed at the end of the knot
Strong knot but despite wetting the knot you can see the friction on the leader between the knot and the leader which makes it vulnerable
Albright special is my go to knot for braid to mono
Yeah I’m gonna pack gloves and put them on every time I want to tie on a leader. I use Albright knot, no gloves, 60 seconds and I’m fishing and haven’t had a failure in 20 plus years.
Mate, Brilliant! .. Thank you.
Simple knots work fine for inshore fishing. Its about teeth and abrasion. Surgeons knot works fine tied in 10 seconds. Then I use FC with a renzetti finish for light freshwater.
.steady neat and strong👍✊
Very tidy , thanks
Youre welcome
Seems like a modified becket bend or sheet bend knot. The only difference is instead of wrapping the smaller diameter line around the bite of bigger diameter once, you did it many times and then retraced it and THEN put it back through the loop. Very interesting I'll definitely be using this from now on
Uni to uni done......
Knots master !!
Great demo except it would be better if you lubed up the line before you start pulling on the lines! Will help prevent burning the mono from the friction.
So many knot vids.....many are similar in nature & look effective. My only problem with braided(20lb) main to fluorocarbon(~8lb) leader....these smaller diameter lines are IMO more difficult to tie with some of these videos....if not the double uni...it's a swivel which also prevents line twist for the win.
You got soft hands brother 👨🏿🦳
nice..
Soundtrack!!!🙌
Ikatan knot yang cukup kemas dan padu 👍🏻👍🏻👍🏻
Kamu nanyak
Well done, you just created a bigger version of the Alberto. LOL
it is an albright knot made in reverse by spinning the nylon instead of the braided thread
Just near the knot, it seems the strength of the leader line is compromised due to excessive friction with the braided line.
Noticed the same thing
fist thing noticed upon completion
exactly, this knot requires to much tension in grapping, which leads to weakness the mono leader
Хорошо показывать на толстой леске ,а если #0,3😊
узел морковка обычно прри вязании плетеным шнуром идет обмотка вокруг флурокармоного шоклидера. У вас наоборот обкручиваете флурокарбоном вокруг плетеногошнура.
This channel is maximum dope 👍🏼
This is the alberto knot I think? Seems the same. Great knot!
Bagus,cuma leader spertinya rusak
Nice
Gostei vou começar a usar esse nó
FG knot still the best IMO
I have had 400 pound + fish on an FG knot, 80lb braid to 80lb floro/wire rigs. Rod will break before the knot would give. Yes, use gloves to fully tighten knot. Melt floro end with lighter so you have a small nub. Finish with half hitches. super glue the knot where it does not overlap the floro...if you have time. This works for all sizes of braid to floro, I use it with 10lb braid to 20lb floro inshore. Will not fail if tied correctly.
매듭법에 강도는 역시 침이였군요 ^^
Congratulation on lessen ur leader strenght
Seeing him wear gloves to tighten that is no joke. Tried it without and the braid went right into my skin
That’s the easiest way I’ve ever seen it done 🤓👍
I would be concerned with the damage on the leader immediately adjacent to the knot where it has burnt/stressed the leader