Honda GROM | Installing a Camshaft Upgrade
Vložit
- čas přidán 30. 12. 2023
- In this video we unbox and install this DHM S1 Camshaft on this Honda Grom.
Valve Clearance Adjustable Wrench: amzn.to/48DE0Cd
Feeler Gauge: amzn.to/3SeFpbd
Check out some of my favorite products @ www.btbuildthings.com
#DIY #AcuraNSX #NSX #NSXPWR #DailyDriver #AcuraNSXTypeS #AcuraTSX #EliteAcura #hondagrom
Recording Equipment
Samsung S23 Ultra: amzn.to/478GTL3
DJI Osmo Action 3: amzn.to/3OhqPxY
DJI Osmo Action 2: amzn.to/3ODnnyO
Insta360: amzn.to/3zttkHD
DJI Wireless Lavalier Mic: amzn.to/3Om5ljc
74’’ Camera Tripod: amzn.to/43ZA9MQ
Vehicle Camera Mount: amzn.to/3HhPlLb
Honda GROM | Daily Rider | Fun, Cheap, Customizable | Review | DHM | Mods | Power | OG | SF | SP | RR | JC92
2009 2010 2011 2012 2013 2014 Acura TSX
Supercar Model: 2017 2018 2019 2020 2021 Gen 2 Honda Acura NSX TypeS Type S 2022 2023 Honda Grom SF Navi 124cc Kawasaki Z125 Benelli TNT135 MSX125 - Auta a dopravní prostředky
Dude this was such a good video! Please continue making content like this. Your explanations are concise and simple, love it. Cheers 🤜🤛
Much appreciated. 🙏🏽 Thanks for the positive feedback. Is there anything else for the GROM that you would find beneficial?
I own a Z125, not a grom. but still watched the whole video. Well done
Thanks!
Hey, I love your videos on the grom, they are the best on yt in my opinion! Quick question on this cam, I've been thinking about getting one but have heard horror stories on the stock cam chain tensioner failing. Have you had any issues with your bike since this install? How many miles have you put on it since the upgrades?
Top speed ?
What is all that extra metal stuff that is on the old cam @ 3:47 that is not on the new cam. It looks like it is directly connected to one of the lobes.
My understanding is that this is the decompression lobe. This is not used on any of the aftermarket camshafts.
Pull the plug when you do this or valve clearence people, much easier!
Did you not install the cam retention bolt back because it wasnt shown in the video
I mentioned @ 5:37
Hello friend, I have a 2021 grom, do you know what measurements are correct for valve adjustment?
For the stock cam setup?
@@btbuildthings yes
Hi, congratulations for the video, it's very clear... one question, did you mount the cams with the original control unit? 🤔
Thanks. After the install, I flashed the stock ECU in this video: czcams.com/video/26q4NNWMUMM/video.htmlsi=QC6BLpuoLLZO-AkR
@btbuildthings Okay.....with the Dynojet you can also return the control unit to its original state, right?
@lidanoserra3934 Yes correct, that is my understanding.
Really thinking about getting the dhm camshaft and installing it, but I’m a bit worried about the install itself, do you have any advise on getting it done correctly now that you’ve done it?! Thanks
Me too im worried
I would say just take your time. This was the first time I have ever done this type of work and it went just fine. Make sure you get all the right tools and just go for it. Taking out the stock cam will take patience but you at least have this video to provide support along the way. Let me know how it goes! You got this!
Just watch the video couple times then knock it out! It's definitely worth it! 😎
Dam Im Nervous to do this solo at home but mechanic charging me $100 so I wanna do it 😂
Canu run the cam without the flash
You cannot. The stock ecu cannot support the higher rpms that the cam allows.
You cannot. The stock ecu cannot support the higher rpms/fuel that the cam needs.
Hey so i got the cams intake and ecu tuned. I installed it did like 30 mile and im not aure if i really feel a difference?? Do u think i have to reset the ecu?ty for any information i appreciate in advance
What tune are you running?
The flash u buy with the dhmoters,for cams ,intake, exhaust.