What happens if my bogging is so bad that I can't take my bike on a 20 mile ride after dumping the full Bottle of B12 carb cleaner solution in the tank. My bogging makes it so I can only drive 1mph but when I put my moped on its kickstand it'll go 40mph. I'm confused might you have an answer?
Hi! I have a kymco movie xl 125 , 2011. The chinese carb is nowhere to be recognized. I have 2 screws visible on the top of it, first is a philips + screw, which is the idle adjustment screw, refered in the manual as the " pilot screw ". The other is a - screw and sits at the cylinder side of the carb. I got no idea how it affects the rough idle / cuts out when stopping at lights / bogging under acceleration, especially when cold If someone can tell me how to reset the mysterious - screw for best mixture (if its even the A-F mixture screw) or at least tell me the make/model of the carb (like most americans know the Gy6 as the most common or only chineese carb)
Don't use a whole bottle. You engine will die after you start it. Just use up to 100 ml (3 floz) when you fill your tank. Fill your tank after you pour in the Chemtool, that way it's mixed with the gasoline.
If you didn't add Sta-bil fuel stabilizer before you stored your scooter, you might want to add some, mix it and run the engine for a couple of minutes.
Going to try this, my bike doesn’t have air filter, it’s been having trouble cranking up lately
What happens if my bogging is so bad that I can't take my bike on a 20 mile ride after dumping the full Bottle of B12 carb cleaner solution in the tank. My bogging makes it so I can only drive 1mph but when I put my moped on its kickstand it'll go 40mph. I'm confused might you have an answer?
I’ve just dumped a can of this into my 100cc piaggio 4t. Let’s see if it works once I’ve ran through a whole tank of fuel.
just want to know how you get those tight ass soft brass screws off the top of the carb without stripping them
Awesome 👍 Thank you. It worked for me. I'm from that area too. Largo girl ❤
Ok preciate it.. will do
Hi! I have a kymco movie xl 125 , 2011.
The chinese carb is nowhere to be recognized. I have 2 screws visible on the top of it, first is a philips + screw, which is the idle adjustment screw, refered in the manual as the " pilot screw ". The other is a - screw and sits at the cylinder side of the carb. I got no idea how it affects the rough idle / cuts out when stopping at lights / bogging under acceleration, especially when cold
If someone can tell me how to reset the mysterious - screw for best mixture (if its even the A-F mixture screw) or at least tell me the make/model of the carb (like most americans know the Gy6 as the most common or only chineese carb)
It doesn't let me get passed 20 mphs
What do I do if I’m pretty sure that’s the issue but I can’t get the scooter started?
Whole spray into the gas tank???
Full throttle on my 600 lmfao
im in the UK and can't get this stuff, can anyone recommend anything else?
Sea foam
It sells on eBay. I found it today.
how do you avoid ethanol?
Find a station that sells ethanol-free gas for recreational vehicles and lawn mowers. In Florida, we have WaWa stations that sell ethanol-free
How much Chemtool should i use on my 150 cc scooter. it has i think a 1 gallon gastank. Should i use the whole bottle yea think or no ?
Don't use a whole bottle. You engine will die after you start it. Just use up to 100 ml (3 floz) when you fill your tank. Fill your tank after you pour in the Chemtool, that way it's mixed with the gasoline.
Ok thanks , I plan on using the Chemtool in it this spring after its been sitting in the the garage this winter .
If you didn't add Sta-bil fuel stabilizer before you stored your scooter, you might want to add some, mix it and run the engine for a couple of minutes.
I’m going to try
It says 1 oz to every one gallon of gas???
Don' use an entire can! 1-2 oz per gallon unless you want to create more problems.
Sea foam is the best !!!!!!
My son says sea foam.he swears by it.but definitely find a station with no ethanol not easy but they're around
first off that thing don't hit 65mph. let alone hold it. lol thanks for sharing video. 40 miles on scooter. who do you think you are, me. .
Jesus Acuna hmm I got 70mph out of my little piaggio liberty 125cc OK it was slightly downhill but it gets to 65mph on a straight quite easy
My 125cc (cali classic) will easily hit 65 too. I don't think they understand that not every scooter is a 50cc.
dsm Dallas stop being a hater
Dsm these bikes definitely hit over 65 my 2012 kymco people 200i gt does 70 easy flat ground about 55 60 up hill
My 50cc hit 50mph surprisingly
65mph lol
Just selling a product 😏