Never knew this dvvt solenoid needed cleaning. Did it improve ur alza performance after the cleaning? And does the dvvt filter needs to be changed over time?
It is a wire mesh kind of strainer. If it is not torn just clean it by pray with carb cleaner or blow with air pressure. Make sure not over tighten when install. The OCV filter union bolt torque spec. is 5.3~9.8Nm. Tip: If you remove the union bolt and you no filter attach to it, you can use a long nose plyer to fish out the strainer/filter.
As i said in the video, the perodua solenoid does not have a screen filter so u actually dont have to clean it. You only have to clean the filter. But if you always change your engine oil on time you only have to clean it after 8 years
Tips: - OCV Filter bolt torque 17.1~31.9 Nm. - OCV Solenoid bolt torque 5.3~9.8 Nm. NOTE: • Be sure to completely remove any foreign matter that may lodge at the installation hole or oil control valve. • Prior to the installation, apply engine oil to the O-ring section and make sure the O-ring is not twisted.
New subs for amazing knowledge, thank you bro for sharing. Keep it up!
Great content, but how to remove the sensor socket because theres no tab or notch tried pressing and wiggle still not coming out
Thank you bro
Recently i found the dvvt on perodua viva and i actually felt like oh! How this function? and how it wire?
Never knew this dvvt solenoid needed cleaning. Did it improve ur alza performance after the cleaning? And does the dvvt filter needs to be changed over time?
👍
already subscribe and like. thank for the info..
Thanks
Nang antap...kongsi cara service ocv alza
please make tutorial how to change engine mounting alza boss.I searching in youtube nobody do.just myvi not alza..please make one sir...
Sorry no plan to do.
Why not renew the o ring?
You can!
hi, have you tried removing the filter?
No but many others have done it successfully
It is a wire mesh kind of strainer. If it is not torn just clean it by pray with carb cleaner or blow with air pressure.
Make sure not over tighten when install.
The OCV filter union bolt torque spec. is 5.3~9.8Nm.
Tip: If you remove the union bolt and you no filter attach to it, you can use a long nose plyer to fish out the strainer/filter.
Boleh share mesin yg you guna untuk cek error code Alza?
In kena pergi kedai scan. Ada kedai bagi percuma je. Kalau pergi Perodua SC dia caj dalam RM10-20
Nak tanya kenapa lampu teko nyala.mula2 guna ok.dah lama guna baru nyala.
Bahaya kena pergi kedai scan. Oil pressure kurang
Kena selalu bersihkan ocv sensor ni ker,saya baru tahu selepas menonton video ini
Tak payah kalau pandai jaga minyak. Tukar on time jangan pakai minyak tiru
Boss, nak tnya, alza saya lepas service aircond timing jadi heng, keluar simpang mcm hilang power, apa yang rosak?
Servis aircon tak kacau timing.Buat servis apa? Tukar komoressor ke?
@@jh-ow2zd tukar piping aircond, servis compressor
Hi how often should we clean the solenoid in the video?
As i said in the video, the perodua solenoid does not have a screen filter so u actually dont have to clean it. You only have to clean the filter. But if you always change your engine oil on time you only have to clean it after 8 years
Myvi got this?
Yes
x kembang ke nanti o-ring dia tu tuan?
Kalau kembang kena tukar
what name a filter
No name. No need buy new. Just take out clean
bos klau d krta myvi 2005 ada jgakh tu filter?
Saya rasa ada juga. Kena check, kalau ada DVVT, memang ada
@@jh-ow2zd ok bos.trima kasih.nnti sya cek
@@jh-ow2zd done sabkarib😁
nak tanya lepas servis dvvt...nak reset lagi ke?
Tips:
- OCV Filter bolt torque 17.1~31.9 Nm.
- OCV Solenoid bolt torque 5.3~9.8 Nm.
NOTE:
• Be sure to completely remove any foreign matter that may lodge at the installation hole or oil control valve.
• Prior to the installation, apply engine oil to the O-ring section and make sure the O-ring is not twisted.
Tq sifu!👍👍👍