LiFePO4 Battery 12V 42Ah Produced in China Factory
Vložit
- čas přidán 27. 06. 2019
- 12V 42Ah LiFePO4 battery/akku (Lithium iron phosphate battery) with BMS. Ideal storage battery for RV, Caravan, Camping, Boat, Outdoor. Produced/assembled in China factory.
DE Store:
www.creabest.de/products/life...
FR Store:
www.creabest.fr/collections/b...
USA Store:
www.creabest.com/collections/...
Battery Specifications:
Voltage: 12.8V
Capacity: 42Ah
Total Energy: 538Wh
Cell Type: LiFePO4
Full charge Voltage: 14.6V
Cut off discharge Voltage: 11.2V
Net Weight: 6.5KG
Dimensions: 233x120x175mm
Discharge Temperature: -20°C -60°C
Charge Temperature: 0°C -55°C
Storage Temperature: -20°C -60°C
Standard discharge current: 50A
Standard Charge Current: 60A
Peak Discharge current(1s): 300A
Terminal Type: M6
Series/Parallel: 4S1P
Resistance:≤10mΩ
I luv the high tech clamps for the case
It was helpful.
Thank you very much.
Gutes Video 👍😊
I love how he has a grounding strap but it's not even plugged in, lol.
Edward Gaviola looks like a thermometer!
@@cmtetaboaco that's a silly ESD wrist strap that doesn't even work.
My guess it is a RFID tag to check in and out from work. Looks a bit thick for grounding.
@@RobinHagg no mate that's an wireless "anti static" strap. Just Google it if you are interested.
Thanks. I was wrong. It is a cordless one. Never seen before.
www.google.com/search?q=blue+esd+band&tbm=isch&ved=2ahUKEwiaycK1sczpAhWihksFHVeAAmYQ2-cCegQIABAC&oq=blue+esd+band&gs_lcp=ChJtb2JpbGUtZ3dzLXdpei1pbWcQAzoHCCMQ6gIQJzoECCMQJzoCCAA6BAgAEEM6BggAEAgQHjoECAAQGFD2iQRYjsYEYPfSBGgHcAB4AYABxQaIAasckgEMMC4xMi4yLjUtMS4xmAEAoAEBsAEF&sclient=mobile-gws-wiz-img&ei=JFnKXpqnDKKNrtoP14CKsAY&bih=612&biw=360&client=ms-android-samsung-ss&prmd=ivsn#imgrc=aJYNMgLZwhukZM
Anti static band is working via Bluetooth I guess? Guess ESD isn't taken seriously there.
Thank you 🙏 ✔️
Đẹp, kỷ lưỡng, rất là OK
i like that
Nice sir
WOW IT'S AMAZING &
BEAUTIFUL 😍
LOVE IT💖
THANKS
BLESSINGS🥰🤗
Opa,essa bateria é top
Very very good
Хочу себе такую же в ИБП! 😁👍
Собери сам и побеспокойся о балансировке банок. Здесь балансиров нет
I think that, it should change conection sequence for risk NG MCU.
Before: B- -> B+ -> Balancing
After : B- -> Balancing -> B+
Looks ok! Only interesting why he puts white silicone on contacts? rust protection?
Good....
Everybody is talking about wrist ground tape...And no one says How cool this video really is! I love It,I don't even care about that tape...One question-wtah is that yellow compound for fixing connectors? I could really use It 😂
Fixing glue
After curing, it can play the role of waterproof, moisture-proof, dust-proof, insulation, heat conduction, corrosion resistance, temperature resistance and shock resistance.
Haha wireless grounding strap 😂😂
Faith based ESD safety.
@@africanelectron751 Yes they actually sell those: czcams.com/video/nvgW5iWXbts/video.html
@ Bury the $1 in your yard instead for equivalent results.
@@Tore_Lund This video link just proves that it does not work because there is nothing in them, lol.
Live strong bracelet
First gluing and then testing :(
No one said anything about testing. Why would you assumed they will be tested.
why not use locktight on the screws????
That anti static band isn't grounded 😂
@Justin likes Photography yes, because there’s absolutely no need for it here.
What's that blue thing on your left hand .... Lol ... Anti-static? So wireless anti static exists and possible? 🤪🤪🤪
No it isn't possible
Absolutely not. Evblog has a good video on how dumb and impossible they are.
Also this battery was built like shit.
这个是用来检测工作期间是否有脱离岗位的设备。类似电子圈。
@@yanganqi9635 subtitles please
@@ProTipsss 好好学习中文，走遍天下都不怕
This likely isn't a production battery. It is likely done on a much more efficient assembly line. This looks more like a video just showing the steps.
If they took over 5 minutes to assemble one battery either the battery would cost a mint or that person is fired.
At a few dollars a day pay, taking 5 minutes to assemble a battery is a matter of pennies - likely the least costly part of the process. These factories have dozens/hundreds doing the same job. Automation simply isnt cost-effective when 200-300M are unemployed and wages are so low
သုံးစွဲသူအတွက် ဘယ်လထုအကြိုးသက်ရောက်မှူ့ရှိပါသလဲ
Why are these people comment on the wrist trap and really don't know what it is for?
@Yin Yang My guess would be that those eddy assholes are thinking they finally found an opportunity to give the content creator a hard time. Motivation certainly being their own pitfulness of not achieving anything purposeful ore usefull in their own frustrating lives.
What they put between the cells?
They are lighter, but apart from that, size for size, surely they have only the same capacity as LeadAcid?
L Guaire I think it’s roughly 2x capacity because even though lead acid would say 100 AH on its case if you discharge more than 50 AH it gets sulfated a little and is damaged. A LiFePO4 can get almost fully discharged without damage. So it’s roughly double the capacity per unit volume. Also it gets more cycles (2k+ vs 500+) before it hits its 80 percent capacity degradation level.
hi are these grade "a" cells? also how can I get a 460ah beast for around $500 here in the USA ? thanks
What's that white paste on the connectors
anyone knows,what is of the type glue using?Three Bond 15370D? or what
Is this "Apollo mission" batteries manufacturing process?
is he using wireless anti static strap?
Haha that armband, seriously .... you must be an expert in electronics.
Top 👍🏾🔋🔋🔋🔋👏🏾👏🏾👏🏾🇧🇷
that's a new way to say "do not open"
Why is the low cut off voltage set so high?
Because that's how the cells wear out prematurely, and you're supposed to ( re- ) buy new ones!
Finger rubbers must not fit thumbs in China. But the guy in the vid can produce 10 of those gizmos per hour. That's impressive. For a minute I thought I was at Subway.
gotta be the most getto "manufacturing" i've seen in years
whats even more bad is theres no compression clamping on the cells. Give it 300-500 cycles and the battery is fucked.
Akkutartó dobozt és cella összekötőt hol lehet rendelni?
No testing before sealing up?
Testing? What is that? You mean, making sure the customer gets a good product? Are you kidding me?
Вы их не Балансировали перед зборкой?
Would like to the battery size and bms as well how much is used thank you
Its 4 am again.. godamitt youtube
Same here bro, catches me all the time
#dead legit me too.
@@topdog43 😐 here we meet again 4 am
Cosa costano gli elementi prismatici x una 36 volt da 60 a 100 amper ??
Great job, do you ship to Nigeria?
no temp probe?
what is the white material used on the contacts for insulation
Is the spongy thing used in the bms mounting readily available, what is it
its just ordinary silicon tube
Anti corrosion
@@huseyinavci356
Why ?
How much does the 1 battery pack cost? And it is better to use LiFePO4 batteries instead of using Lead acid for Off-grid solar system?
LiFePO4 battery is very suitable for Off-grid solar system
Advantages of LiFePO4 battery: High discharge rate, long cycle life, no memory effcet, more stable and safe, fast charging, light weight, and harmless to the environment.
@@creabest_battery thanks for your reply 😊 i'll be thinking about those type of batteries , seems to be a better option
@@creabest_battery definitely not harmless to the environment. Better than lead acid but you should know what you're saying before posting as an expert.
@@veganpotterthevegan so whats the bad side to the environment? All i know is that it has some toxic to the air. Anything else?
@@amirul6447 Lithium mining is still a huge problem. A lot of water is used to get it, and it typically destroys the soil in the area around the mine.
*Hopefully sodium batteries become available in mass soon
Name of glue used in connecter please I just want to which glue is that
Industrial use silicone, prevent loose screws.
@@creabest_battery "ElectroloT" asked about the connector Yellow adhesive and you dull_f are referring to the second silicone you use on the screws. I didn't see the wrist strap attached to anything either. At least the temp probe from the BMS was put in the ceramic thermal grease he applied next to the sponge before closing.
What if i want 48v42amps no need 4 bms right single BMS is enough for 48v, Can you please tell me each cell configuration for 42ah please ?
Why you need no BMS? 4 batteries in series, voltage: 12*4=48V. BMS can work normally. What you need is buy a 48V battery charger.
@@creabest_battery So the BMS in the battery can handle much more voltage than 12 right? This seems to be a bad idea and it's better to buy a second BMS 4S 48V
Is this full production? He's working a bit slow.
YES, it is the full production.
Mi servirebbe una 36 volt lifepo4 da 50 o75 amper che costo ha sono interessato.
Essentially Adequate quality.
Wow, that's a good deal!
At least it has prismatic cells and not that junk 18650 cells or others that if they start to fail they bring the whole lot down. You can repair this and recycle unless your an idiot.
Can it be purchased and if so price and link
What, *exactly* is the white potting compound?
White glue. All glues in PRC factories are specified only by color. That is white glue. Probably neutral cure silicone.
I look for batteries measured in mega Amp hours. I would need too many of these.
Megaamp-hours?! That’s huge! What do you need so much capacity for?!
@@GRBtutorials My re-purposed Tesla batteries, (I have 2), have a combined capacity of 10.6 MAh. It is a mobile electrical system, charged by 750W of solar panels.
@@tomcondon6169 10.6 MAh at which voltage? Because even if it's at 3.7 V (single-cell voltage) I don't recall Tesla making 20 MWh batteries (since you said you had 2), at most 100 kWh in their Model S/X. And 40 MWh is a huge amount of energy, equivalent to my home's usage in winter for about 3.6 years!
@@GRBtutorials One battery holds about 5.3 MAh, so two at 10.6. They are 24V batteries. A Tesla automobile has more than a dozen of those.
@@GRBtutorials One thing, MegaAmp hours, MAh, are not MegaWatt Hours. MWh. I am not a battery expert, I am learning batteries.
😲😲😲😀😀👍
👍👍👍👍💕
Это как из четырёх банок 12 вольт?
Son 4 de de 3V conectado en serie
Habe jetzt auch die Creabest 42Ah. Nach etwas nutzen stellte ich fest, dass die Batterie bei 13,6 Volt aufhört zu Laden und bei 11,8 Vollt entladen. (nicht wie beschrieben). Kapazitätstest erreichte ich nur 25 Ah ! Hab die Batterie auf gemacht - 3 Zellen hatten 3,2xxx Volt und eine 2,5xxx Volt. Ok deswegen zu früh das Laden und entladen aufhört. Ist das BMS schrott ? Zellen nachgegoogelt , LiShen ... und dann noch nicht mal von derselben Produktion. 1x Oktober 2019 , 2x Januar 2020 und 1x März 2019 ! ??? Sorry aber nie wieder !!
1. Wenn die Batterie kurz davor steht, vollständig aufgeladen zu werden, ändert sich die Batteriespannung zu schnell, und die Spannung jeder einzelnen Reihe von Zellen im Inneren ändert sich ebenfalls zu schnell. Wenn eine bestimmte Zelle zu einem bestimmten Zeitpunkt 3,65 V erreicht, trennt das BMS den Ladezustand der Batterie; Wenn die Batterie dann stillsteht, fällt die Spannung der Zelle mit zu hoher Spannung langsam auf einen stabilen Wert ab. (Die stabile Spannung beträgt etwa 13,6 V und eine einzelne Zelle etwa 3,4 V.)
2. Lithium-Eisenphosphat-Batterien zeichnen sich während des Entladevorgangs dadurch aus, dass sich bei niedriger Batteriespannung die Spannung sehr schnell ändert. Wenn die Spannung niedrig ist, sind daher die Spannungen der 4 Zellen in der Batterie unterschiedlich. Wenn die Spannung eines von ihnen zu einem bestimmten Zeitpunkt unter 2 V liegt, spielt das BMS sofort eine Rolle beim Abschalten der Batterie. Nachdem die Batterie nicht mehr funktioniert, kehren die Spannung und die verbleibende Leistung der Batterie normalerweise nach etwa 20 Minuten Ruhezeit zu normalen Daten zurück.
3. Die von uns verwendeten Batterien stammen von Hercules, CATL, BYD und anderen bekannten Firmen. Die Batterien, die in jeder Batteriecharge verwendet werden, stammen aus derselben Charge gekaufter Zellen.
@@creabest_battery Ich habe schon Ahnung vom ganzen und dennoch bleibe ich bei meiner Aussage ! Wie gesagt voll geladen und bekam nur 25 Ah heraus. Wo sind hier 42 Ah oder ist das BMS hin ? (Solange die Zellen so nen Drift haben, komm ich nicht mehr auf die ganze Kapazität) Dann müssen sie einen besseren Hersteller nehmen, weil 10 Monate Zellenunterschied geht einfach nicht. Hab jetzt alle Zellen Parallel am Laden - nur so komm ich wieder einheitlich mit allen hin ! Liebe Grüße
No body realise he just got the bms wired up wrongly 😅
Yeah I noticed thought I was seeing things
Could you sell it to thailand ?
заливные головины лучше залить пластиком
Didn’t see any balance wires?
Bcoz u dont using your eyes.
for sure, he's not a chinese guy. he's too slow ! :-)
What is black plate?
Just filler to make it fit tightly in the case.
Very nice betry paak how is praise
Where i find to buy a box / case for battery?
The box is specially designed and customized
Not available on the market
@@creabest_battery i find this box on alliexpress
Using fome padding on top of the heatsink of the BMS.. now the heatsink cannot dissipate the heat... That's a fail in the first 30 seconds... Lol Hunters gun shop is not connected to anything.. you can see the silver part where it's supposed to be connected to the ground wire.. lol also if you looked at the top of the battery cover you can see is not designed for this application it was designed for lead-acid or a gel battery and they just hacked bits off.. also he is using the same hardware on the anode and the cathode "the bolt's" and I'm pretty sure that's wrong too..
whistle @3:19
Took him half an hour to put on his gloves...
Nice . But price is so high
Those cells have such a soft aluminium threads that 1 out of 3 cells will get a damaged thread. If anybody know how to fix cells thread let me know.
czcams.com/video/-_azEsNkA9Q/video.html
@@kenneth6731 hmmm but in my case I gotta deal with a blind hole ...may be if it's possible to brake the dent upward of the helicoil it eventually might work. Otherwise it's not for me. Tha k you for sharing! I'll try and update!
He is wearing a wireless static discharge wristband... You do know those things do not work right???
It can anti-static
@@creabest_battery Anti-Static only works when the wristband is connected to the ground potential otherwise it will not work
@@samohraje2433 Static ring have two types: wired and wireless
thanks for your reminder
@@creabest_battery Wireless doesn't work bruh. If they are wireless so where the energy is disappeard? Wristband antistatic thing ONLY works when is connected to the GROUND pottential otherwise it will not work. I don't know what you thinking about but wireless antistatic wristband is BS . The wristband must be having a capacitor inside but the second problem is that the capacitor itself with negative and positive side with the same charge can not take any charge to it. Better to replace yours " wireless" wristbands with those who are connected TO GROUND .-.
@@creabest_battery are you seriously believe that bullshit?
You must be the kind of guy who sell a car without a physical brake and called it a brakeless brake system 👎
I got quoted 555.55 for a 200amp lifephosphate battery with BMS from china. 578 with bluetooth
3 months ago, i have purchased+received WITHOUT BMS, 24v 25ah in 240$eu( included shipping) + custom tax...the only negative side is the "wait" which is approx. 5weeks
It's like the fancy electric cars people buy, or a box of chocolate, u never know what you'll get from china
Giá nhiêu nhỉ
Too pricey for uncertain quality
Do you sell on eBay or aliexpres...???
Thanks.
Neither 😆😆😆😆
Hello Salvador, do you need BMS also? 86-15118479016, nimi.liu@dalyelec.com
Charge ( -) terminal and Load Negative terminal different. How this PCB use same ? Bms or balancer circuit inside one ?
If the charge ( -) terminal and Load Negative terminal different, you can just use a wire contect the battery Negative terminal. BMS is installed inside the battery.
But where are the balance wire connections?
Ok I see it now. He started installing them at :45. My phone screen is too small🙁
Need per unit cost price ? can we use this battary in petrol car?
We do not recommend use LiFePO4 battery as petrol car start battery. As for price: 299 EUR
@@creabest_battery Why is that?
I like it what is the cost 12v 45AM
Hello Rajender, do you also need BMS? We are a BMS leader manufacture. nimi.liu@dalyelec.com
👋 ph
Funny how one of the cells doesn't have a balance lead on it at all, how does the BMS even work....
@Lee Holt: It's a fake circuit board, sir!
Which cell? They all have leads
@@mostlymessingabout Weigh a known 18650, then weigh the other ones. Those which contain sand are lighter.
Bán đựơc bao nhiêu tiền?
360 USD
Berapa itu harganya, mau beli dimana
pls send qutation 42 ah cell
and all catagary
please link BMS
ship to Pakistan please!
A du mua 1 cụt này thấy cho 3 bình acquy 36v đc ko bạn ?
Đây là 12V
How much price?
এই প্যাকেজটি আমি বাংলাদেশে নিতে চাই কিভাবে পাব প্রাইস কত পড়বে
Майло😁
How to contact a manufacturer?
Hello Kush, we are a BMS manufacture, do you need it? nimi.liu@dalyelec.com
How much prise in Indian marckt
Can anyone telL me where I can buy these in Philippines?
You can purchase through the corresponding product link on our youtube channel.
We can ship from Hong Kong/Shenzhen, China.
Comrad please stop pointing ☝️ at me with that little finger in the bottom right hand corner. And no more whistling. Please. Why am I here comrade I’m suppose to be starting 5th grade.
How do I buy this product?
You can buy it from website:
www.creabest.com/collections/lifepo4-battery/products/lifepo4-12-8v-42ah-deep-cycle-battery-for-rv-leisure-marine-boat-caravan-camper
or www.creabest.de/products/lifepo4-42ah-12-8v-tiefe-zyklus-batterie-akku-fur-wohnmobil-wohnwagen-camping-boot-schiff
How do I buy this product
And what is the market price
And where is suppliers
How do I buy this product
@ Sunil Patidar It’s about 300,- €. Greetings from Belgium 🇧🇪 ✌️
Hi
Is there any dealer in India ? Please mention.
Currently, dealers are mainly concentrated in Europe, the United States, Australia.
Hi Sir,Do you need BMS also? 86-15118479016, nimi.liu@dalyelec.com Our main market is India