Video není dostupné.
Omlouváme se.

How to fix repair a stuck seatbelt - Ford KA Stuck Seatbelt

Sdílet
Vložit
  • čas přidán 3. 04. 2018
  • Hey everybody, Igor here from cars exposed thanks for tuning in, i will be uploading videos here every week exposing cars issues and fixing it hoping to give information so any diy people and enthusiasts interested in having a go at fixing their cars ...
    Today we're going to be working on a Ford KA 2012 seat belt stuck, where i removed the seat belt re-tractor finding the inertia ball bearing and cup covered in a heavy layer of dust and lint keeping the seat belt locked at all times, i apologise in advance for losing some of the footage from this job where i felt necessary to go and get another couple re-tractor from a scrap yard and take it apart to show what goes on in the mechanism where the inertia ball bearing lives thanks again i hope you enjoy the video and find it helpful/informative , and if you do... make sure to subscribe like it and comment below cheers
    ➤ Like My Content? Subscribe for More Awesome!
    goo.gl/3uHc1E
    Click here for my previous video:
    ➤ / @carsexposed
    Contact Me:
    ➤ Carsexposed@yahoo.com

Komentáře • 26

  • @GroofusDoofus900
    @GroofusDoofus900 Před 7 měsíci

    Followed your instructions in this video today and now my seatbelt is working perfectly. thank you so much buddy.

  • @Eccentric_Villain
    @Eccentric_Villain Před 4 lety +1

    This has saved me money on my car. Fixed my Kia seatbelt by this tutorial.

  • @adrianjones3703
    @adrianjones3703 Před 4 lety +3

    Same problem with 2012 Fiesta that has been going on for three years or more. Generally ok during winter months but as soon as the temperature rises the passenger side gets stuck. Normally janking on the belt and gradually feeding a piece of belt out then janking again gets it going again however having happened again this week did a search found this video followed the instructions dismantling it cleaned, added a bit of oil to the spindle of the cup that holds the ball bearing, reassembled all is working fine atm.

  • @TheElectroman5
    @TheElectroman5 Před 5 lety +2

    Thank You from Canada.

    • @CarsExposed
      @CarsExposed  Před 5 lety

      Gordon K Canada Wow!!! you are welcome 👍 cheers

  • @nickrowlands9354
    @nickrowlands9354 Před 2 lety +1

    When refitting the belt to the car body check that you have not introduced a twist in the belt. I got the trim panels back on before I realised I had so had to disassemble again. 🙄

  • @TentoesMe
    @TentoesMe Před rokem

    Thanks. Mine is stuck. I saw a bid where the guy threw the ball away, but that did not look like a repair to me!

  • @yorickpoppe3440
    @yorickpoppe3440 Před rokem

    Thanks abee

  • @FredericoNery
    @FredericoNery Před 6 lety +4

    Nicely done. keep up mate.

    • @LMAutoRepairs
      @LMAutoRepairs Před 6 lety +1

      FredericoNery
      Very good!
      Does the missus know you have been doing that on the kitchen bench? 🤔
      Thank you for sharing!

    • @CarsExposed
      @CarsExposed  Před 6 lety +1

      Thx guys hopefully there is something there to help someone.... Yeap it was 🤣🤣🤣 I actually showed her coz the last time I recorded in the kitchen she told me off but she was cool this time women for you 😜.... hopefully soon I get the shed sorted out to use as a workshop thx for support and watching the videos cheers 👍

  • @vdubnotch4810
    @vdubnotch4810 Před 2 lety

    Great helpful vid. Level!!

  • @mightymo4502
    @mightymo4502 Před 4 lety

    thank you brooo from west london

  • @temejumbo9794
    @temejumbo9794 Před 5 lety +1

    Hello mate, my Honda Accord 2010 sedan is showing the srs light cant find how to do it reset it. Any help will do.
    thanks
    NB still expecting me stickers from Nigeria......

    • @CarsExposed
      @CarsExposed  Před 5 lety +1

      teme jumbo hello mate, you will need a scan tool able to clear srs dtc’s, but unfortunately it will not clear if you have any present codes, the most common problems are the connectors underneath the front seats sometimes they get kicked by passengers try to unplug them and plug it back in also another common issue is the clock spring...but you will need a scanner to identify where the problem lies... I’ve sent you some plus some sweeties it’s a shame it didn’t get to you I wonder if it got stopped at customs, I’ll send you some tomorrow without the sweeties 👍👍👍

  • @fivhfjfyghh3396
    @fivhfjfyghh3396 Před 4 lety

    Excellente information merci, thank you 👍

  • @johncarrigan9352
    @johncarrigan9352 Před 3 lety

    Not actually why that ball is there. I used to think it engaged in the event of collision but the seat bell tensioner locks up anyway and by different means?

  • @clintonjohnestacio4485
    @clintonjohnestacio4485 Před 5 lety +3

    What was the background music?

    • @CarsExposed
      @CarsExposed  Před 5 lety

      Both tracks are from Epidemic Sound, the one in the beginning of the video is called “Pawn Shop” by Andreas Jamsheree and the other one “Is all Love” by Axel Ljung 👍 I hope it helps and don’t forget to subscribe for future content cheers mate

  • @0505abab
    @0505abab Před 5 měsíci

    Can't be the same your steering wheel is on the wrong side

  • @yassinyou
    @yassinyou Před 4 lety +1

    What happens if i remove the ball and didn't put it back!?

    • @CarsExposed
      @CarsExposed  Před 4 lety +1

      Mohamed Yassin depending in what system you have if you remove the ball the seat belt won’t lock ....

    • @yassinyou
      @yassinyou Před 4 lety +1

      Thanks, where can i order a new ball and the black thing?!