It turns out my issue was a little different - the seat belt had become hung up on a plastic thing under the cover. But because of your video, I wasn't afraid to pry off that housing and figure out what the problem was. Thanks!
Nice video. In addition to cleaning, I'm wondering if there isn't a way to get a little more tension in the retracting mechanism. Does it have a coil spring in it? Would it be possible to tighten that spring a little bit to get a more aggressive retraction?
I saw a guy do this. The water and soap that the other guy used lubed the mechanism a little. I just pulled mine all the way out and shot some wd40 in there. Works a lot better now. It's just as good as this and the other guys fix but a lot easier.
Charles Senf i felt like that would of made this too complicated plus we do not use all of the seat belt so that means that the section in retractor should be clean.
What is the connection between retracted seatbelt and dirty seatbelt?... Why washing the seatbelt will make it fixed......can someone explain to me... Don't it cause of the mechanical problem?
It doesn't woke because of all the grim and dirt! pull it alll the way out , clamp with vise grips ,drop it into a bucket of warm soapy water for 30 mins. let dry and good as new!!
It turns out my issue was a little different - the seat belt had become hung up on a plastic thing under the cover. But because of your video, I wasn't afraid to pry off that housing and figure out what the problem was. Thanks!
hey glad to hear you fixed your problem thanks for watching 👍
Thanks for the video. Ya it might be one of your older vids, but it still applies today! Thanks brother
Thank you!
Me and my 5 year old son are going camping thank you so much the last time it kept scaring away the deer or it was terrible thank you so much
Thus is a. K I C K - V I D E O ! ! ! Thank you!!!
One thing about these videos, if you forget how it came apart, you can watch your own video to recall which washer went on first, etc.!
Test the motion BEFORE putting the cover back on, no?
thank you for your ideo, is a real great help
thank you glad It helped!
Wow that was a really nice video; thanks for posting it. I am going to try it sometime on my car. The only problem is finding the time to do it.
Thanks great video
Nice video. In addition to cleaning, I'm wondering if there isn't a way to get a little more tension in the retracting mechanism. Does it have a coil spring in it? Would it be possible to tighten that spring a little bit to get a more aggressive retraction?
Thanks for watching unfortunately im not familiar of any way that you can add more tightening tension sorry
It would be a good idea to change the water a couple of times - just as your washing machine does. Maybe add some soap?
I saw a guy do this. The water and soap that the other guy used lubed the mechanism a little. I just pulled mine all the way out and shot some wd40 in there. Works a lot better now. It's just as good as this and the other guys fix but a lot easier.
I just show it a picture of Rosie O'Donnell.
Im going to have to try this trick. Mine still retracts all the way but does act sluggish... I have a 2012 Subaru Forester.
By te way - good camera angle and lighting!
Good video! Thx
Thank you!
thanks worked great thanks
Why not remove the tether thing so you can put the entire belt in the solution (or almost all of it)?
Charles Senf i felt like that would of made this too complicated plus we do not use all of the seat belt so that means that the section in retractor should be clean.
Would have*
great stuff thanks.
Good video bro!!
thank you!
this was awesome
lame fix, cleaing the webing does not repair a weak spring. The spring still needs to be replaced
very helpfull
cool, ill have to do it to,
Thank you for watching
What is the connection between retracted seatbelt and dirty seatbelt?...
Why washing the seatbelt will make it fixed......can someone explain to me...
Don't it cause of the mechanical problem?
The dirt on the seat belt will make the Belt not retract smoothly, this won't damage your seat belt just let it dry
@@ERICSDIYGARAGE thanks man...
I used canned air to blow the dirt out of the retractor mechanism, It works great now. My belt was clean. 06 DTS Cadillac
@@steverzepecki500 just air blow?..no water and any kind of soap?
@@m.shafiq1685 blow out the retractor mechanism, my belt was clean.
It doesn't woke because of all the grim and dirt! pull it alll the way out , clamp with vise grips ,drop it into a bucket of warm soapy water for 30 mins. let dry and good as new!!
If I hear "right here".... One more time 😑
If you just rotated the bit at the top it would have straightened it out!
Hi five ..I thought I was the only one who saw that
How can I release the middle seat belt in the back it's stuck
Zaima Lewis try using wd40 where it connects
The belt in my 2K Dodge Dakota doesn't retract at all!
Dude with this type of material is hot water and laundry detergent in a bucket for a couple of hours.
is it
Now change that nasty seat
I tried this. It didn't work.
Mike Theunissen your issue might your seatbelt mechanism
I'll check it out. Sorry I didn't want to sound harsh. Thanks for your reply!
Me too
8 hours = 20 minutes 👽
Unsold cars sold dirt cheap
it doesn't work if you have 2 doors
+Kevin Advincula thank you for your input
There's no panel to take.
The whole panel would have to come out. Lol
But it gives you an idea how.
It did to me.
Wrong
There are much better videos on the proper way to clean and lubricate the seat belt system. Good effort poor results.