Simple Ready Made Solenoid Kicker
Vložit
- čas přidán 28. 08. 2017
- Simple solenoid kicking mechanism for your robotic/automation project.
Circuit diagram: goo.gl/7zy8vR.
If you want to activate the kicker using wireless RF remote relay module, then use this circuit: goo.gl/CFRWC2. It is combined with a micro switch for local activation feature and the best part is, both of the relay and switch are working together to cut the supply from ZVS capacitor charging module to prevent back current when either one is pressed/triggered. When both are idle, they will make sure the loop to the capacitor is always established to ensure the solenoid activation is always ready.
(Updated on 1 June 2018): Watch this solenoid kicker used in real robot soccer competition here: • Autonomous Vision-guid... .
(Updated on 11 January 2019): For a larger and more powerful solenoid, you may refer here: goo.gl/RyQ9RJ.
Thankyou , I was looking for a solenoid to make a door lock releasing set-up and I was doubted about its power. I think this video is enough to understand. Thankyou once again
You are welcome :)
Nice work! It is very helpful
Hi this is really interesting. Thanks for this demo. Do you think this could be used to trigger a motorcycle shift lever? And could you provide the link to the solenoid used here?
Love it I love it. Just what I was looking for. You must be pushing the boundaries by going as high as 400 Volts on a 12 Volt Solenoid. That is more than thirty times more than designed for! BUT I love how powerful it is👿. Yea.
Working principle of a coil gun. But I thing the relais is burned out quite fast. The solenoid is also not build for this kind of hammering force and will eventually destroy itself.
The coil is not powered for a long time so should be able to handle The higher current.
So yes its possible. But not a good idea.
Thankyou. Can we use a capacitor of lower rating? Appreciate it :)
hi nudge, with that system how many kicks can it do per minute aaprox?
Does anyone know what other capacitors can be used for this project that more easily available in the US?
Nice project, man! Congratulations! One question: I used to power solenoids directly with a DC charger. I triggered it from the microcontroller using a transistor. My intetion is building something like an inpact piston, but I want to be able to finely tune the speed/impact force, perhaps incorporate a control system to automatically do this.
But I never really quite understood how to control the strength/speed of the solenoid in this setup with a DC charger. I thought I was restrained to use the voltage specified on the solenoid (usually either 12V or 24V on those I bought from AliExpress), so I tried changing the charger amperage, but with very little effect on the speed/impact force. By watching your video, perhaps there is something I am missing in this problem.
What is the importance of the capacitor in this circuit? Is it because we can activate the solenoid with a higher voltage burst? Do you have any ideas what component I could use to control the speed/impact force of the solenoid?
Arduino micro controller make a circuit that has different resistors on it with buttons or a slider to control speed and maybe separate one for power
can you make a solenoid with the wire wrapped around a metal tube? Mine doesnt pull in the rod for my pulse motor. The iron rod seems to stick to the sides of the metal tube instead of being pulled all the way in.
Hi there, thanks for the video! I am trying to fit this entire assembly into a smaller project, powered with a LiPo battery. Do you have any tips on how to achieve the same (or similar) power? Thank you
Hello. Could you?
@@kaptanmike1957 It's complicated. If you don't mind a massive temperature spike after each "shot" then yeah, quite achievable. Making it work for your use case is the hard part.
@@aCloudOfHaze I plan to use it in oceans. to launch a small torpedo. Do you have any suggestions? Can I use a smaller, lighter battery?
I am confused how come your circuit diagrams don't include the car relay? Please can you show a diagram with the relay
is the kicker only working from the 12v-----if so can you tell me where to buy this 12v kicker
can you make it kick less with lesser voltage?
hang on... what voltage did you dump into the 12v solenoid again?
Can You make this for trigger hammer for air gun?
Hi, can I do this using AC Solenoids?
Hey mate, your videos have been very helpful so thank you very much. I have a question though: would the kicker kick harder when I use a supercapacitor of 2.7V and 500F?
Hello, thank you buddy. For the question, the answer is most probably no. Because using that supercapacitor, the maximum voltage that it can contain is only 2.7V even we charge it using 390V capacitor charger. Large capacity alone will not help to push the kicker. For example I once have tried to drive the kicker using low voltage like 20V but with 2 units of 3300uF (giving it 6600uF), the result is the kicker kicked softly. I also have tried the other way, using 390V but with a small capacity like 100uF, the result is the same, the kicker kicked very softly. So for the conclusion, you need a high value of voltage together with a large value of capacity to make the kicker kick hard.
@@nudgeme4844 Thanks man for your fast and clear explanation! In some other comment you left on a similar question, you suggested using 2 parallel capacitors to boost the kicker, is it then still possible to charge it with the same capacitor-charger?
Yes, that's what I did in the video above. I used a single ZVS capacitor charger to charge the capacitors that were connected parallel to each other, and triggered them using just one limit switch.
Sorry, not in the video above, but that's what normally I do.
@@nudgeme4844 Thanks man, you're a hero!
new hit man weapon
Salam kenal mas, kalo beli partnya yg lengkap di olshop mana ya, atau kalo beli jadi dimana ? trima kasih ilmunya 🙏
This will be nice Pcp air rifle hammer ! For Pressure valve opening
Nice. Question this solénoïde is comercial or made for this project?
Hi, the solenoid is commercial, and can be found here: www.banggood.com/DC-12V-35mm-Long-Stroke-Push-Pull-Solenoid-Small-Electromagnetic-Electric-Magnet-p-1217063.html?rmmds=search
Did you make or buy that solenoid? If so do you have specifications or a link to buy?
Hi, for the specific model of the solenoid shown in the video, you can find it here: goo.gl/AH6izP.
Thanks!
Nếu không có tụ mà tôi đấu nối trực tiếp đến mạch thì có gây cháy không?
Facilitar el diagrama y accesorios xf
Gracias
whats module capasitor charging do you use ? thanks
Hi, try to see here:
www.ebay.com/itm/DC-DC-Boost-Converter-8-32V-12V-to-45V-390V-High-Voltage-ZVS-Board-Module-NEW/332082164474?_trkparms=aid%3D555018%26algo%3DPL.SIM%26ao%3D2%26asc%3D49576%26meid%3D02f70ba08aa04d809148f76fa4bc7a75%26pid%3D100890%26rk%3D2%26rkt%3D12%26sd%3D112000151734&_trksid=p2056116.c100890.m2460
i like, how much would be the energy consumption of a solenoid in ampere and volt
In ampere I am not sure but for the volatge, it was 390V!
hello can i use solinoid with the arduino ..
i want to use a low power solinoid with the arduino with wireless rf ..what will be the code and diagram
Hi, just connect between the solenoid and the Arduino with a relay. Circuit: goo.gl/CFRWC2
How to make this bluetooth ?
Is it possible that our solenoid didn't work well caused by the bad coil? If it's possible,Will you suggest me the best coil or the best way to make the best coil for solenoid?
Try this: goo.gl/4RFPQB
Maaf sebelumnya Mas. Jadi saya harus beli gulungan solenoid nya maksudnya Mas?
Is there a way you can control how hard the solenoid kicks?
Use solenoid with thicker and more coil winding, or use higher voltage or use higher capacitance (connect capacitors in parallel to each other).
If the 12v solenoid is used, can it be powered directly from 24v battery(without capacitor) and have similar results?
No, battery has a high resistance than capacitor, also capacitor send high voltage in very short time
@@dyaakhaled9219 what hpnd if you never press button... It keep go high or remain at 390volt
Hi... What type of relay can be used? Please provide me the part name.. I used SRD-05DC type relay but it was blown off... The solenoid coil resistance is 2ohms and the voltage is 300V.. the relay is not supported 150A inrush current for 5msec...
Hi, try to use the car relay with the amp rating of 30A
What is the model of selonied??
Holy fuck lmao that's strong.
Awesome!
Cuales son las especificaciones de es solenide y q es lo q lo hase tan potente
Hola, solo trate de encontrar un solenoide de marco oprn regular en el mercado, como eBay o AliExpress
Nice, where did you get that shirt?
Haha
You can not get same performance with micro controller cause relays can only do 250volt...yes?
No, that's not right. I have triggered the relay (you need to use car relay as shown in the video for this one) using Arduino and it worked like charm. But to be safe for the microcontoller, the use of RC snubber module is recommended.
@@nudgeme4844 i can not get it to work. Do you have a circuit layout using a micro controller and car relay please? I'll pay you for it...
You need a dc capacitor
I can see this working for a short time but surly the coil on the solenoid would burn out very quickly, how long did the solenoid survive? 🤔
As long as you guard the solenoid chassis with proper bracket, it will survive the impact damage for a long time. I have used the bigger solenoid coil and plunger, with higher capacitor capacity, it was able to kick normal soccer ball pretty forceful, and the solenoid chassis fell apart several times. After I reinforced the chassis by welding additional brackets, it turned out to be stronger in construction. The coil itself didn't experience any burn out however. It is because the current supplied is kind of low despite the large voltage used in the circuit.
@nudgeme4844 I see very interesting, so even though the coil is rated at 12v the current is not increasing by much and because its such a short burst it doesn't appear to adversely affect the coil. I might give it a go! Thankyou!
Wow-what does the strength depends on. ??
It depends on 2 main things, first the level of voltage (here I used 390V), and second the value of capacitance (I normally use a pair of 3000uF capacitors parallely connected to each other if I use larger solenoid kicker).
How to split 400vdc using 250v relays?
use triac
Hi, i need u help.
It this powerful enough to shoot a diamenter 40mm, weight 24g ball to 6 meter away?
you were working on a table tennis project? How did it go? I am trying to use that too to lift a ball vertically
@@eduardosantos-to6gz no, I was use it for a ball launcher. End up the project work fine. The consistency of the system work great , I can control the end position of the ball by adjusting the voltage I feed to capacity
@@ybchang88 do you think you can share more infos, details, video etc I am into a project but am a total noob in electrics. I think I need to use a solenoid but the stuff is too complex for me. Do you have whatsapp?
@@eduardosantos-to6gz it have been 2 yrs, im not sure doni still keep those file in my pc. What exactly u want solenoid to the the task? Shoot the ping pong ball to the air verticaly? How high u desire? Are u do a project just to lift the ball as kick-off at start of the game?
@@eduardosantos-to6gz if u just wanna lift a short distance, no need that big solenoid and capacitor as in this video, just use regular solenoid and feed 12v should be enough
hi ! im from indonesia and i need some help from you. if u can help me pleas reply..
thanks
Ada apa ya?
kereeen, sangat kuat padahal kecil
made Aryawijaya Yang besar lagi kuat. Cuma ga divideokan aja.
typee selenoidnyaa apa ya saya mau beli
where did you get the capacitor ?
Hi, you can find it on AliExpress.com. Here is the example where I bought mine:
tinyurl.com/y29dvx77
@@nudgeme4844 Well i built the circuit with the same parts as yours, and same wiring, it worked perfect once, It blew the 10 Amp fuse in the booster circuit,- Would you have any guesses on why ?
Apa kekuatanya bisa mencapai 70 newton ?
What part number for the items?
Hi, try this:
www.aliexpress.com/item/33050164225.html?spm=a2g0o.productlist.0.0.4538602cCES1uc&algo_pvid=4d9f50a3-d85a-4078-af3f-2bc2773296be&algo_expid=4d9f50a3-d85a-4078-af3f-2bc2773296be-55&btsid=ae14dff7-975f-4636-883a-06aeebca0014&ws_ab_test=searchweb0_0,searchweb201602_1,searchweb201603_53
apakah selenoid nya melilit sendiri atau beli ? kalo buat sendiri boleh lah bagi cara buatnya
Kalau yang diperlihatkan dalam video ini, solenoid nya adalah dibeli. Jika ingin buat sendiri, boleh lah rujuk video ini: czcams.com/video/fVGrYoqn-EU/video.html. Cumanya dalam video itu tidak ditunjukkan secara explisit cara untuk membuat lilitan, tapi hanya secara kasar sahaja. Sebenarnya caranya mudah sahaja, buat sahaja suatu lilitan menggunakan magnet wire pada paip PVC, dalam kes ini saya membuat lilitan sepanjang 10cm sebanyak 3 kali lapis pada paip PVC tersebut.
Hey I need ur help!!
Yes? Whats up?
modul carger untuk kapasitor nya itu namanya apa ya??
+arta dio Cari "ZVS module" dalam online store seperti Lazada, ebay atau AliExpress.
Apakah cukup kuat untuk menandang bola futsal?
fachri zamzami Maaf saya tak sempat nak test hari tu. Nanti next week kalau takde aral sy test guna bola sepak pula
fachri zamzami Hi, kicker ini telah diuji tadi untuk menendang bola futsal dan inilah hasilnya:
goo.gl/ZPHhAa
Kelihatan ia mampu menendang bola itu walaupun secara leret sahaja.
Can i make this for my school science project
Yes, why not?
@@nudgeme4844 can you make any other interesting thing or any idea for making an interesting thing in this lockdown☺🙏plz
I wished to but due to time constraints, I am not able to do so for the time being :(
@@nudgeme4844 ok no problem 😔
Mas. Apa apa aja bahan pembuatan solenoidnya kalau boleh tahu? Soalnya kami pas charging gak bisa sampek full capasitornya dan chargingnya lama banget
Ok, perhatikan perkara-perkara berikut:
1. Pastikan power supply membekalkan kuasa yang cukup. Perhatikan larasan arus selain larasan voltan sekiranya menggunakan DC power supply. Sekiranya menggunakan bateri, pastikan bateri mempunyai kuasa yang cukup. Ukur voltan menggunakan voltmeter atau multimeter.
2. Periksa solenoid takut-takut dia ada putus dalaman. Uji menggunakan continuity test pada multimeter.
3. Lihat fius pada ZVS capacitor charger, samada terputus atau tidak.
4. Adjust variable resistor pada ZVS capacitor charger. Putar sehingga output voltagenya meningkat kepada 390V (boleh ukur menggunakan voltmeter atau multimeter tanpa sambung kepada capacitor).
5. Jika output ZVS capacitor charger sudah mencapai 390V apabila tidak bersambung ke capacitor, tetapi tiba-tiba menurun apabila disambung kepada capacitor, mungkin ada kesilapan dalam menyambungkan litar. Check pin NC, NO dan C pada limit switch supaya tidak tersilap sambungannya.
6. Jika semua sambungan sudah betul, lihat limit switch takut-takut ia sudah rosak. Saya dulu mengalami masalah yang sama hanya kerana limit switch sudah cair, menyebabkan litar pintas berlaku dan ia telah menghalang arus sampai ke capacitor.
7. Periksa wayar takut-takut ada yang putus dalaman. Gunakan wayar yang tebal kerana cas yang dilepaskan adalah amat tinggi.
8. Mungkin ZVS capacitor charger tidak bersesuaian. Dahulu ada rakan saya yang guna ZVS capacitor charger yang modelnya tidak dapat menampung kuasa yang tinggi.
Harap dapat membantu. Terima kasih.
@@nudgeme4844 Terima kasih Mas. Saya akan langsung Coba
@@nudgeme4844 Jadi harus sampek 390 V ya yg diset Mas? Gak boleh 100 V?
@@nudgeme4844 Maaf Mas. Apakah Mas ada saran kapasitor yang baik? Atau recomended
which circuit module is this?
ZVS capacitor charger. Search it in AliExpress
@@nudgeme4844 tanks.
@@adesouza9352 You are welcome!
❤❤❤❤❤👍👍👍👍👍
the solenoid will be powered high voltage, and the power on time is very short, solenoid got big force, i think.
pick up me got more solenoid video of push pull solenoid
How much cost solenoid actuator?
akue ajim Hi, the actuator costs about USD8..
Nudge Me that great... thanks encik
akue ajim Beres. Selamat pulang ke tanah air!
Nice la en najmi
Hafizi Ashraf Uih mana boleh sebut nama. Orang tau lah nanti 😂
Nudge Me skit2 je...bkan slalu...
halo mas,boleh minta emailnya untuk berbincang-bincang?
F a k e. The first was at saturation, the second the volt meter read 0 and the third you removed the volt meter.
It sure blew that hammer away with something.
Hi there, thanks for the video! can i get your email or any social media? i need to ask something related about this circuit. Thanks!