I know this video is super old, but I watched this video, unplugged the resistor, plugged back up, fixed my problem. Thank you very much and I hope some good karma comes your way. (:
It was in the connector that plugs into the FP resistor. The FP resistor is an aluminum box that is attached to the stock air box, because I have a MazdaSpeed 3 intake its attached to the intake.
thank you for this video. It was the exact problem i was just experiencing after installing a cobb sf intake. It turns out that i had the Resistor connector flipped upside down. THANK YOU
Hi i have the same kind of issue , the car starts and after 2 seconds it stops. I found the relay but it seems to work. I didn't understand when you said it's the fuel pump resistor, you mean the relay ? Thanks
You can download Dashcommand in your smartphone App Store and buy a ELM327 wifi dongle that plugs into your ODB2 port, if you don't have the money for a Accessport. The wifi dongle sends your cars info out to a wifi signal that the app interprets. It's what I am using for the time being. Works great to monitor fuel pressure.
Having this problem now took it to Mazda they replace fuel pump maf sensor o2 sensor and $2000 later the car is still stalling out now they are saying it’s the fuel rail sensor ughhhh I am soooo lost at this point
I have a 2006 Mazda speed six I checked the fuel pressure it’s running at 465 then drops down to 300 and keeps dropping and eventually dies do you think this is the same issue I know the high-pressure pump on the motor internals were just re-done do you think it’s the one inside the tank
See the car sat for a little bit it ran fine before it sat and now I have this problem where it starts up for a little bit just like your video and shut off and then I’ll start right back up fine and then shut right back off I literally have everything done to this car I am just stunned
I have a 2007 mazdaspeed 3 and this happened last night, I would turn the car on and after 1 min it would die! The same problem happened 2 weeks ago but then I took to my mechanic he told me he had it on for 2 hrs and it would die..... help.
I know this video is super old, but I watched this video, unplugged the resistor, plugged back up, fixed my problem. Thank you very much and I hope some good karma comes your way. (:
Awesome man, I’m glad it helped!
It was in the connector that plugs into the FP resistor. The FP resistor is an aluminum box that is attached to the stock air box, because I have a MazdaSpeed 3 intake its attached to the intake.
bro this is the fucking video i’ve needed to make sure my car had fuel issues.
thanks!! this saved a friend of mine a ton of time.
thank you for this video. It was the exact problem i was just experiencing after installing a cobb sf intake.
It turns out that i had the Resistor connector flipped upside down. THANK YOU
Where's this resistor connector?
How did you have it flipped it only plugs in one way?
@@kohlgossler7083 it will only “seat” successfully one way, but the plug itself will go ON but doesn’t seat.
@@hob684 oh really gotcha. I'm having the same exact problem right this moment and I'm in some parkinglot somewhere haha😅🙃😭 good times right🤣
Yeah, as has been discussed it was a bad connection in the fuel pump resistor.
Can you share any details about what was bad in the fuel system resistor/relay?? Any photos? I am having the exact same issue, to a few!!!
The reg is part of the HPFP, it has no test port so it needs to be read with a scanner of some sort.
Thanks i worked om my friends mps 3
How'd u fix it?
Hi i have the same kind of issue , the car starts and after 2 seconds it stops. I found the relay but it seems to work. I didn't understand when you said it's the fuel pump resistor, you mean the relay ? Thanks
It was a cold solder between the FP resistor and the relay. Its been fixed.
what is the year of this car?
How to test fuel pressure ?
Please I need an answer.
Where are the pressure regularltor location?
You can download Dashcommand in your smartphone App Store and buy a ELM327 wifi dongle that plugs into your ODB2 port, if you don't have the money for a Accessport. The wifi dongle sends your cars info out to a wifi signal that the app interprets. It's what I am using for the time being. Works great to monitor fuel pressure.
can i ask how much it cost to get this fixed I have the same exact problem.
Check fuel filter strainer in tank, Maybe it's clogged The fuel flows in pipe decrease
It was the fuel pump relay.
My check engine flashes since i bought the ap as well, no clue why, but it seems to have no negative effect
My 06 mazda3's check engine light flashes too when not running
Having this problem now took it to Mazda they replace fuel pump maf sensor o2 sensor and $2000 later the car is still stalling out now they are saying it’s the fuel rail sensor ughhhh I am soooo lost at this point
Check your battery negative cable if is burn and change it.
georgie sonymusic what? why?
Have you fixed this problem yet? If so what was it?
And I traced it by looking at wiring diagrams.
It is not bad at all my car takes 7or 8 twists to start the car!!
You need to do a 40min engine to computer relearn whenever you disconnect the battery. Search for relearn process for mazda on CZcams.
That wasn't it at all, read the comments. And no, a "Relearn" has nothing to do with this.
I have a 2006 Mazda speed six I checked the fuel pressure it’s running at 465 then drops down to 300 and keeps dropping and eventually dies do you think this is the same issue I know the high-pressure pump on the motor internals were just re-done do you think it’s the one inside the tank
It's a good place to start.
See the car sat for a little bit it ran fine before it sat and now I have this problem where it starts up for a little bit just like your video and shut off and then I’ll start right back up fine and then shut right back off I literally have everything done to this car I am just stunned
@@danbeirnes7989 I would check the resistor first, then move Ron to the fuel pump... I have another video of how I jumped the resistor to test it.
It definitely was the resister thank you helped out a hell of a lot
@@danbeirnes7989 Awesome. Glad you figured it out!
I have a 2007 mazdaspeed 3 and this happened last night, I would turn the car on and after 1 min it would die! The same problem happened 2 weeks ago but then I took to my mechanic he told me he had it on for 2 hrs and it would die..... help.
Bryan Guevara What do you mean help? He just told you what the problem is.
looks like aboot 10 seconds and then ahh, it tends to cut oot
Are you having a performance issue also?
No I wasn't
P
its probly you're internals
It wasn't the internals, Read below.