Spot Hogg Sight Tape Setup | Spot Hogg Fast Eddie XL Sight Tape
Vložit
- čas přidán 29. 06. 2024
- In this video I show you how to set up the Spot Hogg Sight tape. The Spot Hogg sight tape setup process is pretty easy, and I demonstrate the Spot Hogg Fast Eddie XL sight tape setup, but the process is pretty much the same for all Spot Hogg sight tape setup.
Make sure you set up the sight properly before doing this step as that's critical or this step may not work as it should. Check out my video on how to set up the Spot Hogg Fast Eddie XL and go through those steps first.
Spot Hogg Fast Eddie XL Setup Instructions: • Spot Hogg Fast Eddie X...
Spot Hogg sights are known for making some of the toughest sights on the market, and this Fast Eddie XL is no exception. Spot Hogg sight tape setup is pretty quick and easy. Go through the step we show you in this video and you'll have your new Spot Hogg sight dialed in no time!
Check out our other gear reviews! backwoodspursuit.com/category...
Instagram: / backwoodspursuit24_7
Facebook: / backwoodspursuit - Sport
Great video. This video actually shows the step by step that is needed to sight in. Other than people just recording themselves shooting their bows with no explanation. Thank you
Thanks Steve! Glad it was helpful!
@@BackwoodsPursuit maybe a dumb question but I'm thinking on getting a spothog but I only have on to 30 in my yard and 40 at the range I'm asking cuz in the video u said 20 and 60
@@shawnskinner34 good question....yes, you can do the same process at 20 and 40 manually, but the sight tape calibration sticker is calibrated to 20 and 60yds I believe. Doing 20 and 60 ensures a more accurate reading to pick the sight tape.
@@BackwoodsPursuit ok thanks for the help
@@shawnskinner34 you bet! Any time.
Great video!! Very Informative and excellent video quality!!
Thank you and thanks for watching!
Thanks for your help and advice on sighting the spot Hogg thank you
Absolutely! Glad it was helpful!
Thank you so much for making a logical, step by step video that explains this process. I can't tell you how difficult it's been for me to find someone who knows how to communicate this stuff to a beginner! Stoked I can actually get to the range and sight in my bow now. I went from a traditional five pin to this setup and have been frustrated with the Spot Hogg setup up until now. I Have subscribed to you and look forward to more of your content.
Hey there Brian! Glad it was helpful and thank you for subscribing!
THANK YOU. i needed this 💪
so many videos on this sight but your video is by far the best.
Thank you for the feedback and thanks for watching! So glad it was helpful! Dont hesitate to reach out if you have any other questions as you get it dialed in.
@@montdm thank you sir! Appreciate that!
Thanks. I had trouble knowing if I should pick bottom or top pin as slider and now I know you can use bottom. Thanks
Absolutely! I prefer the bottom pin as the floater because I had the sight built with a .10 size pin for the bottom two, which helps at those longer distances.
Backwoods Pursuit would be awesome if you could make a quick video on adjusting the other parts of the sight like pins up down etc
@@melvinsacromentoe I could probably do that. Any other parts of the sight other than the pins that come to kind that would be helpful to have a video on?
Thank you for the video, so helpful. When you are shooting in your bow, do you usually switch tape when you switch from field tips to broad-heads?
Absolutely! Glad it was helpful.
No...if your bow is tuned right, you shouldn't need to change anything. Good luck!
Thanks for making this video! I don't have a spot hogg sight or any sight with a pin, just an Avalon tec x sight with a merlin archery blackhawk 4x magnification. It really helped to know how to put on a sight tape.
Absolutely! Thanks for watching and for the feedback!
No problem, I like watching hunting videos but I'm 13 so I can't hunt :/
@@renatugaming5730 no time like the present to keep learning! What's the legal age to start hunting where you live?
@@BackwoodsPursuit In Ohio if you are under 16 but over 10 you must have a "Junior license" Under 10 obviously can't hunt. 16 and over have to get the adult license and can hunt without an adult. Only thing that would put me back is parents would be shocked and ground me and probably put the deer in the trash bin or something. Give me a lecture on how its not "good" to be hunting. Then again I live in a bad area so I can't really be secretive and go out in the morning with a bow and a deer. Having a bag would look like I killed someone then they would call the police or something. Until then I just at most want to shoot 3d you know?
I'm not really in the shape to be walking miles on end and I don't have a car( Minimum is 16 in us)
Good video, i have the two pin, but id be taking that crooked install right off!! Hahahaha
Thanks for watching!
Did you start the 20 at the top of the roll gear and move your pin to adjust for a full range of motion on the wheel?
Hey there! Not quite sure what you are asking? Sorry!
Very helpful! I have the three pin and have the pins set at 20 30 40. So to float the bottom pin I would just need to shoot that pin in at 20 and 60 on the dial then match the correct sight tape and set it on the marker at 40?
That's exactly right! Thanks for watching and let me know if you have any other questions!
You set it on 40 without moving the wheel? So essentially the 40 on your tape ends up where “60” was on the calibration tape?
Should I sight in my fix pins first or set the yardage tape first and then go back and set my fixed pins @ 20 30 40 etc.
Great question and thanks for watching! You can do it either way, but I personally like getting the sight tape set first so I can make sure I've got the house in the position I prefer on the vertical slide.
Great video and I understand the sight tape setup using the bottom pin, but what about the pins above? Don't you have to gap those first and then set up the bottom pin allowing you to use that bottom pin for farther shots?
Hey there! Yeah, you can set the other pins before or after you get the sight tape dialed in... whichever way you want. Thanks for watching!
So do you pre sight in all 5 pins at the highest point so you have more range to move that bottom floater down to maximize your distance ?
Thank you for the video, it was very informative. I'm still a little unclear on how to set your floater. I already have my XL 3 pin set up for 20, 30 and 40 yards. I want the bottom pin to be my floater. If I do the 20 and 60 yard calibration with my top pin since it's already sighted in, how do I translate that to my bottom pin as the floater? Thanks!
Hey there! Since you're already got your tape selection done, just line up the purple pointer with 40yds on the tape since that'll be your bottom pin yardage and the one that floats. You should be good to go then! Thanks for watching!
@@BackwoodsPursuit Thanks for the reply! I haven't actually done the sight tape selection yet, I should have watched this video before sighting in the rest of my pins! I like your suggestion of just setting the indicator pin to my 40 yard mark, is there any loss of accuracy with that method since the 40 yard pin wouldn't have been the one to select the sight tape?
I potentially have enough movement in my sight to remove the slide stop and roll my 40 yard pin up to 20. Would that be more accurate than calibrating with my existing 20 yard pin and adjusting my indicator like you suggested initially?
@@emaxim1 either way will work just fine. I just like using my bottom pin for the sight tape because I've got a .10 for my bottom pin rather than the .19 for my top couple pins, so I feel like I'm a bit more accurate with the .10 at 60yds. If you have a .19 for all your pins, it won't matter though.
Thank you for the video. Do you have any issues with your tight spot quiver bracket being in the way of you dove tail knob
Adjustment In and out? My tight spot bracket hits the the thread of the bold knob. Had to use the short Allen bolt instead
Never mind. Just watched your video on set up and it answered my question 👍 Just subbed! Do you have to re sight in if you move the dove tail in or out?
@@jasonbellows7 thanks for the sub and glad the video answered the question! If you move your dovetail in or out you might have to make a small change, but I haven't had to yet when messing with that. Thanks for watching!
When you are done shooting with the floater pin, and want to shoot with your fixed pins. Do you have a mark to set your top pin back to 20 yards?
Hey there! Yes, on the sight tape there is a marking for your zero position so you know where to move it back to in order to use all your fixed pins. Good question and thanks for watching!
I’m shooting 70lbs with 28DL and some how end up with #12 tape. I can only dial to 70 yards before arrow vanes hitting the housing. What your draw weight and draw length? Any advice?
Good question! What is your arrow weight?
I've got another video that shows some setup options to give you more clearance, but basically you can move the housing up to the top screws to gain extra clearance. Here is that video.
czcams.com/video/_Mwv0g5bUlo/video.html
Let me know if that works! Thanks!
So the the top 4 pins are your fixed pins ..20,30,40,50 when the purple yardage indicator is on 60? Then if you need longer ranges you roll from 61-100 and use bottom pin?
That is correct! And ..the bottom pin, the 5th pin is the 60yd pin. Thanks for watching!
Nice range
Thanks! It is a nice range!
So if I sight in my top pin at 20 do I use my same top pin at 60 to get the correct calibration tape? then when I get that set on my bull knob I would use my top pin if I wanted to shoot 70 yards that is indicated on the tape?
That is correct....use the same pin to shoot at both 20 and out to 60 to find the correct tape. If you use that 20yd pin, yes you'd then use that as your floater. I prefer to use the 60yd (or whatever your botton pin is) as my floater since it's a .10 rather than a .19 and works better at longer ranges. But, that's personal preference.
I need a video explaining how to sight in the other pins as I have a 3 pin fast eddie on the way and im a visual Learner. No video on CZcams explains how to set the fixed pins on the fast eddie. If i use my bottom pin as my floater then when I sight the 2 top pins in what if my 30 yard pin is too close to my 40 yard pin? Changing the position of the floater would throw off the sight tape. So thats where my confusion starts.
Thanks for the heads up. I'll see if I can put one together as I've gotten a couple requests for that video. Thanks!
Hey there! I finally got around to putting together that video on setting up each of the individual pins on the Spot Hogg sights. Here it is if you still need it! czcams.com/video/5DQ8ljR4eYs/video.html
Thanks!
Little late but just got me a newer spot Hogg sight. Did you just move your wheel as you went back in yardage? Or did you find a spot on the wheel that hit for 30,40,50,60?
Hey there! I moved my wheel and kept using the same pin the whole way. Thanks for watching!
Thanks it really helpful 1 question do u have to adjust yur pin or dnt touch the pin at alk
Glad it was helpful and thanks for watching! Yes, you'll need to adjust each of the individual pins (see my other video on how to do that). Once you get your sight tape selected, you can get to work dialing in each of the individual pins. Let me know if you have any questions!
Sorry again...I shot 20 yard n look good so am I suppose to shot 60 yard with my 60 yard pin becuse I shot 60 yard with my 60 yard pin n it turn out ok but to the right a little so I dnt know with tape I suppose to use. Anything let me know... Thanks
@@theonexyooj3779 your almost there! Once you get dialed with your 20yd pin at 20yds, move the whole housing with the big nob and sight in your 20yd pin at 60yds. Once you get that, whatever number the purple pointer is pointing at is the sight tape number you'll use. That make sense?
So after u get the sight tape done do u still have to sight for 30 -50 yards or those pin already good to go
@@theonexyooj3779 you will need to sight in each pin just like any other sight once you get your sight tape selected and installed.
Quick question. I’m trying to sight my FE XL in and other people have told me that u want to start with the sight as far up as it will go and when I do that I am way low so when I roll down I am like half way before I can get my 20 yard mark so it don’t leave a lot of room to roll down is that how it’s supposed to be or am I doing something wrong? Thanks for any help
Hey there Joe! Sounds like you may need to move your sight bracket to get your top pin closer with the sight rolled all the way up. There are two Allen bolts that allow you to move the entire sight housing up or down, so unscrew those and move the housing accordingly, then you should be a lot closer. Let me know if that works! Thanks for watching!
So should I sight all my pins in first or go right to doing the sight tape?
You can do it either way really, but I like to do the sight tape first personally. Thanks for watching and let me know if you have any other questions!
Could you use the center pin for the adjustable?
Absolutely! That's a great option as well!
Thank you for the video. At 1:20 in to the video you mention sighting in your bottom pin for 20 yards. Did you mean to say your top pin? For example, I was watching John Dudley's video on sighting in the NE Fast Eddie, and he sights in the top pin at 20, first. Thank you.
Thanks Scott! For purposes of finding the correct sight tape, I like to use the bottom pin rather than the top pin because I've got a .10 bottom pin and a .19 on the top. Once I've got my sight tape using the bottom pin, them yes, roll the nob back to "zero" and sight in the top pin for 20yds. Does that make sense?
@@BackwoodsPursuit aaaaaah I gotcha. Yes sir that makes more sense now. Interesting point about having a smaller bottom pin for longer yardages!
@@sthompson447 Yes sir.... I always do a custom build on sights and have smaller pins on my 50 and 60yds pins. Helps with a smaller aiming point at longer yardages. Thanks for watching!
We need more detailed instruction on the three pin Spot Hogg.
Are we supposed to sight in all three pins first, 20-30- 40 with the dial maxed to the top
.
Then place the guide tape at 20 which in theory is where your first pin was sighted in at 20.
Then we shoot while adjusting the dial down till we center at 60 yards using the previously sighted to 40 yard pin...? Confusion Starts Here !
That spot on the dial now becomes where we place the 60 yard mark from the selected yardage tape.
I imagine that the guide and dial are moved to accommodate a 50 yard shot, only using the bottom pin ( 40 yard Pin ).
So the three pins we originally sighted in at 20-30-40 will not work unless we have the dial back at 20 yards .
Furthermore, if we use the 40m yard pin ( Floater ) it should be dialed to the entire Dials yardage settings...? 20- 100 yards...?
Does this sound like the correct manner to sight in the Three Pin ..
Thanks
Hey there! Some great questions. I think you are on the right track though. The three pin is basically the same as the 5 pin, but you use the 3rd pin as the floater (if you set it up as I did in the video), and that 3rd pin is used to sight in at 20, set the calibration tape on there, then work your way out to 60 yds using that same bottom pin (floater). Once you are sighted in at 60 using the bottom pin, whatever dial the number is pointing at is the tape number you'll use. You can "zero" your sight wherever works best for your bow setup. Some people like it starting all the way to the top, and others don't.
The three pins you sighted in only represent 20-30-40 when the sight is at the "zero" position, so yes, you are correct there.
I hope that helps!
Happy shooting!
Have you made a video on the triple stack?
Hey Gary! I have not yet... sorry!
@@BackwoodsPursuit thank you for the response I'm sure between your other how to videos I can figure it out just a hair more confusing lol
@@mrTaylormade1991 absolutely! I'm sure there are a lot of similarities, so hopefully it won't be too different! Thanks for watching!
Question, what si the point of all the other pins if you just use the bottom one?
Hey Travis! The other pins make the sight function like a fixed pin sight so you don't have to move the sight unless you are shooting at extended ranges where you need the slider. Effectively it's a fixed pin most of the time with the ability to move when needed using the bottom pin as the slider. Does that make sense?
What pin would be 35yds ? The bottom floating pin or 20 moved down ?
Hey there! You can either pin gap for 35 yards (assume you have a 30 and 40yd pin), or you can use your floating pin (bottom pin) and roll the sight up to 35 on the tape and use the bottom pin. Thanks for watching!
Stupid question, having a hard time determining where the dial is landed on after getting to 60 yards. The black line would indicated the number in between the red numbers correct? I'm either on 30 or 31. Thank you!
Hey there! Yes... There black number looked to be the odd numbers between the red line numbers. Thanks for watching!
@@BackwoodsPursuit Appreciate it. Thanks!
@@jasonbellows7 any time!
I have the five pin so technically I could set one of my pins to 20 yards work my way back to 60 with same pin and just basically use that one pin for everything correct
That is correct! Should work perfectly for you.
Hi can i use the same calibration scale if i use meters?
Hey there! To my knowledge it is designed to be used in yards, but you could contact Spot Hogg and double check. Thanks for watching!
what are the pin yardage increments for this sight?
Hey! You can make them whatever you want, but I had them set at 20-60 in 10 yard increments. Thanks for watching!
Black gold or spot hogg? Which do you like the best?
That's a tough question as I like different things about each of them. I prefer the smoothness of the dial on the Spot Hogg, but the location of the sight tape on the Black Gold. I like the smaller sight housing of the Black Gold but the MRT system is pretty nice too. The Spot Hogg seems like it's more durable, but it's also a bit heavier. I'd give the edge to Black Gold on the pins as well, but just barley. At the end of the day I lean toward the Black Gold (between the ones I've tested), but they are both excellent sights!
How do you adjust for left and right when sighting in the spot Hogg?
Hey Caden! There is a toolless adjustment for the left and right with this sight. Super simple...just loosen the knob, and turn the windage knob. Thanks for watching!
@@BackwoodsPursuit clockwise to the right and counter clockwise for to the left?
Also.. if you set the bottom pin at 20 then roll down to find 60 slaps the tape on there, does that mean now your top pin won’t be 20 ,30,40,50 very confused haha
Hey again! No....think of using that bottom pin at 20 then 60yds as just to find your sight tape. Once you've done that using the calibration tape they provide, peel off the calibration tape, grab your correct sight tape and line up the 60yd mark on the tape with the purple pointer. From there you'll need to sight in each individual pin (except the 60yd pin). Here is a video I put together on that process to help. Thanks for watching!
czcams.com/video/GpBEnZ3RiMo/video.html
Ok I have had this sight for over a year now and still have t got it sighted in I’m confused on the process with the pins in between 20 and 60 I understand using the bottom pin as the floater that’s what I would like to do but how do u sight in your 30 40 50? Do u do that manually or what?
Hey there Garrett! Yes....once you have your sight tape selected, you will need to sight in each pin individually like any other sight. Here is a video I did on that process. It's a bit different than most other sights on this Spot Hogg. Thanks for watching! czcams.com/video/5DQ8ljR4eYs/video.html
@@BackwoodsPursuit thank you!!! That helps a lot!!!
@@garrettmisenheimer2816 any time! Happy to help.
Looks like a pain in the ass!!
Haha....yeah, it's a little complicated, but a great sight. Thanks for watching!
Why did you use the bottom pin sight in at 20?
Hey Zach! When finding the sight tape, you are looking to find the tape number with corresponding pin gap, so you want to use the same pin when shooting 20 and 60yds.... doesn't matter which pin though. I just used the 60yd pin because it was a .10, which makes shooting at 60yds more precise. Thanks for watching!
What pin did you sight in at 20 yards
I used my 20yd pin, but you can use any really.
I just got the single pin model, and the instructions don't mention setting the second and third axis, so I don't need to worry about that, right? Sorry, I'm new to these.
Hey there! Even with the single pin, you'll need to set your 2nd and 3rd axis. Those are both critical to being accurate, especially at longer ranges. I've got another video here on the channel on how to set the 2nd and 3rd axis on these sights. Thanks for watching!
@@BackwoodsPursuit OK. Thank you for your quick reply!
@@ronharman7665 you bet!
@@BackwoodsPursuit I hate to be a bother, but could you post that link here. I just looked, and there are so many videos. 😳
@ronharman7665 you bet! Here you go!
I need help with mine I don't understand it.
Hey there! What part can I help with?
Great video. If you set your slider to 60, what are your other five pins set at? I was setting up my Fast Eddie XL sight with the assumption that the fixed pins would be 20, 30, 40, 50, 60 and then use the 20 as the slider. You show that the 60 is the slider. Does this effect how you have your fixed pin yardage?
Hey there and thanks! Your fixed pin yardage won't change if you were to use your 60yd pin as the slider, you'd just change the position of the tape. Pretty easy switch once you know what tape to use. Let me know if you have any other questions!
So if your slider is set at 60 and you have your tape still turned for it to be 60, then your top 4 pins are going to be what? 50, 40, 30, and 20 automatically because we found we needed tape number 19 (in this video) and it accounts for that? Because just moving dial for bottom pin seems like treating it like just a single pin adjustable site which we might not have time to adjust or ability if at full draw on a moving target that started at 60 but is now 30. Is that correct?
Great question! Yes, once you get your sight tape selected (in this case #19) and install your tape, the other pins can then be sighted in at 20, 30, 40, 50, and 60. If you have a 3 pin, same thing, sight the pin in like would would any fixed pin sight. The slider simply allows you to dial in the distance you want using that 60 yard pin (as I've got it set up anyway) for longer distances or if you want an exact distance, say 37yds using the floater pin. In all reality, I don't use the slider function in hunting situation very often as I typically will just pin gap rather than move the sight, and I definitely prefer not to take shots longer than 60yds on animals. But, it does give you the option, which can be nice. Does that help? Thanks for watching!
Backwoods Pursuit yes I think so. So tape #19 essentially takes into account draw weight changes for the bow? Thank you for the great video and further info.
@@thomasbenton8241 kind of. Tape #19 is what this bow with this exact draw weight, draw length and arrow setup liked. If you changed any of those aspects, you'd need to reset for a new sight tape.
So I have the exact same 5 pin sight. I'm trying to get it sighted in. I was told to sight my top pin for 20, then use the bottom(5th) pin as the mover and sight it in for 60. Is that correct or am I missing something? Seems like you may have done something slightly different.
Hey there! Yeah, sounds like the same way I have it set up....top pin or 20 and 5th pin (bottom pin) for 60yds, and then the bottom pin is the mover.
@@BackwoodsPursuit thank you so much for the reply! Idk why the instructions they provide arent more clear, especially for the price. Ok so 1 more question, from what I understand I just sight in all the pins as normal right? So when do I move the bull knob?
@@Ranger_k16 absolutely! Yup...just sight in the pins as you normally would with any 5 pin sight, then you go through the process in the video to find the correct sight tape(you can actually find the correct sight tape first as well... doesn't matter). Then, once you have the pins sighted in and the correct sight tape selected and installed, you may need to use the sight housing adjustment that moves the whole housing (not the nob, the screw) to bring it back to being sighted in, depending on where you want your "zero" to be with the big nob. Does that make sense?
@@BackwoodsPursuit ya that mostly explains it. I guess the one thing I'm not understanding is where the align the pointer to. Do I line it up with the 20? That doesnt seem right since if my 5th pin(60) is my floater, wouldnt I need to put the pointer at 60? Or are you saying that I need to move the bull knob up so the 5th pin is set to 20? Idk why this is so confusing but I appreciate you taking the time to explain it as best as possible.
@@Ranger_k16 no problem at all! Yeah, you'll line up the purple pointer with your 5th (bottom) pin, so that the only time you will move the nob is when you want to shoot past 60yds. Then the 5th pin becomes your floater/movable pin. Sounds like you are almost there!
So what are the rest of the pins for if you’re only using 1? How would you use the others?
You'll basically use the sight as a 5 pin (or 3 pin if you have that model) and only use the slider functionality if you want to dial to an exact distance or a distance longer than you bottom pin. That make sense?
@@BackwoodsPursuit
I was confused as well, since twice you said to “sight your bottom pin to 20 yards.” If you sight your bottom pin to 20 yards, what are you sighting the top four pins at?
@@sombojoe you just are sighting in the bottom pin to 20yds, then putting the sight tape calibration tape on there to find the correct sight tape for your bow setup. Once you've got your correct sight tape selected and installed you'll use the sight like any 5 pin and the bottom pin is your floater. Does that help?
@@BackwoodsPursuit so your sight housing is: top pin 20yds, 2nd from top 30yds, middle pin 40yds, 4th from top 50yds, bottom pin 60yds/slider?
@@codyhyman6247 exactly! That's how I've got it set up and has worked great for me.
Since your bottom pin is your floater, the rest become useless right??
Well, kinda.....that's only true once you move the sight and begin using the bottom pin as the floater. The other pins can be used for quick reference, but obviously they will chance depending on what distance you are at (if you've moved from the starting, or baseline position). Thanks for watching!
@@BackwoodsPursuit so if my marker is on 60 then my top pin would be good for 20 still?
@@koryandrews8133 depends on how you have it set up, but yes....when the sight is at its baseline position, it functions exactly as a fixed pin sight.
👍🏻
@@koryandrews8133 any time!
How do you all shoot past 100?
Good question! You can make your own tape(add a white label) below the 100yd mark and then make you own custom marks for 105, 110 etc if you have enough arrow clearance.
So the bottom pin should be 20? I thought the top pin was supposed to be 20?
Hey there! The top pin is still 20yds. You can just use the bottom pin as a 20yd pin, then a 60yd pin to find the right sight tape. That make sense?
@@brandonhom6390 not 100% sure what you are asking, but yeah, use the bottom (or top) pin at 20yds, install the calibration tape with the purple arrow pointing at 20yds. Then, using that same pin, work your way out to 60yds by rolling the dial down(so the whole housing is moving). When that same pin is now sighted in at 60yds, look at the calibration tape and it'll tell you which tape number to install. Make sense?
The tape is made for lh or rh this reason to need to cut side.not choice....
Thanks for insight!
What if you don’t have a 60 yd target? My club has a fifty not
Sixty
Hey Christa! You can still do it at 20 and 50yds, but just can't use the calibration tape that Spot Hogg provided. Just use a blank white label and put it in there, sight in at 20, then sight the same pin in at 50yds (doesn't matter which pin), and then find the sight tape that matches your 20 / 50yd pin gap(on the dial). Might not be quite as accurate as doing 20 and 60yds, but it'll still be very very close
@@BackwoodsPursuit so I went and sited in my 20 yd pin. I used the top pin. Once I have correct tape will bottom pin be 30 yds? Is that how it works? So when I’m hunting I won’t need to turn the dial to 30yds when I go to shoot a deer?
@@christaluongo8919 how many pins does your sight have? If it's a 3 pin, your top would be 20, 2md would be 30, and 3rs would be 40, so anything past 40 would be what you use the dial for. Does that make sense?
@@BackwoodsPursuit yes. I have a 2 pin site. I have a tape on it now but it needs adjustment. I went up on my draw weight to 45lbs from 40.
@@christaluongo8919 awe... gotcha. Yes, so your pins will be 20 and 30yds then, and anything over 30yds you would dial using your bottom pin.