Video není dostupné.
Omlouváme se.
E-bike speed delimiter: SPEEDi [Center Lock Installation Instructions] Increase your e-bike speed
Vložit
- čas přidán 6. 08. 2024
- SPEEDi increases your e-bike speed limit by 1.5x using mechanics only - no messing with your bikes computer. Check out the installation instructions to see how easy it is to install the new Center Lock SPEEDi. The SPEEDi is compatible with Giant, Trek, Specialized and more. Precision engineered, designed & manufactured in New Zealand. The SPEEDi will delimit your e-bike speed so you don't hit the dreaded brick wall when you're givin'er the beans 🤙🏻
🚴🏼♂️ Delimit your e-bike speed today - shop the SPEEDi at nlscomponents.com
Perfecto, se monta así de fácil como en el video y ahora es una maquina nueva, gracias./Perfect, it's assembled as easily as in the video and now it's a new machine, thanks.
Work with Heybike 27.5" Race max model?
Compatibile per vivobike vf20h ?
Can i fit it on a giant delivery e+?
The magnet sensor is near the disc brake and magnet on the brake disc, it had 6 bolt brake disc.
Send me an email from the website and we can look into this with you.
I have an NCM T1,000 e-fatbike, if this part is compatible I will buy it, but I would also need that large circular wrench.
The SPEEDi is designed for mountain bikes with mid mounted motors and pedal assist, which have a disc bolt mounted magnet on the rear wheel for the speed sensor to pick up.
Your bike has a rear hub motor which has an integrated speed sensor, so SPEEDi is not compatible, sorry.
@@nlscomponents I want to cry!
@@nlscomponents I just removed the controller, I will see if there is a thin red or white wire to disconnect.
Are these available for Orbea Rise 6bolt disc with a Shimano EP8rs motor
Yes, I have sold a lot for this bike with great results, get in touch nlscomponents@gmail.com
If I use this in conjunction with the speedbox 3 will my bike fly?
Haha! I like the way you think. But eventually the motor will run out of power to assist you through the wind resistance, and you will run out of gears, I have found most motors are good for about 50kph - 30mph, which is right where SPEEDi cuts out, at this point you are usually out of gears also.
Could I make this compatible with a trek powerfly 7 2019 .
The 2019 Powerfly FS 7 has a spoke mounted magnet whereas SPEEDi requires the sensor to be mounted inside the dropout near the axle. If the sensor is able to be mounted near the rear axle then it may be possible for it to work.
Hi I have brand new 2023 Trek Fuel EXE 9.7 and my stock weel rear is Rapid Drive 108, 6-bolt, Boost148, 12mm thru axle For speed shimano.
Do you think this will work? SPEEDi for Trek Fuel EXe 9.7 / 9.8 / 9.9 (2023)
Yes.
The 54T vs 108T is on the drive side on this hub, the disc side is exactly the same which means this does not affect the SPEEDi.
@@nlscomponents ohh thanks notice 54 and 108 and not understand it first. I placed a order. Its gonna be great thanks
How many miles does it take with that device?
Great question! I have customers report over 10,000km and still going strong which is very impressive, like everything mechanical it does wear out an need replacing, but I am very happy with it's durability and I'm sure you will be too.
Buongiorno é compatibile con haibike all mnt 3?
Hi there, we will need to get some more information to check this bike. Please send us an email at nlscomponents@gmail.com, and we can check it out :)
Not for rear wheel motors
Nice part but having hard time getting answers to my emails.
Sorry, I've been flat out at the machine shop.
@@nlscomponents Please help me out getting one of your Speedi and install it.
Can this be done without thr bottom bracket tool?
The correct bottom bracket tool is highly recommended so that no damage is caused to the nut, as there are fine details that the backing plate uses to mechanically hold itself to the nut.
@@nlscomponents thanks guys appreciate the response 👍
I'm not very good at this stuff so just going to watch each step about 5 times as I do l😆
@@jbloggs4161 haha no problem, the instructions are also very informative and the most up to date nlscomponents.com/pages/support
@@nlscomponents thanks again
Is there a specific bottom bracket tool or are they all the same?
And really sorry to be a pain, but how do i ensure I'm tightening to 40nm?
@@jbloggs4161 16 notch 44mm, Either purchase the tool that allows the use of a torque wrench, or tighten it with the BB spanner to very tight, you will feel the retaining notches in the nut start to engage, go to around 5-10 clicks past touching.
Just want to say, you make it pretty hard to buy your product when you don't even answer emails.
Hi Lionel, I have replied to both of your emails within 2 days and haven't heard back, it must be getting lost in your emails somewhere?
@@nlscomponents seems weird mate as I sent the second one from my email not your webpage contact form. I will send another one when I get home from my Hotmail. Cheers.
@@lionelcook8522 Hotmail? WELL THERE'S YOUR PROBLEM 🤣🤣🤣
same here. I have sent 4 emails with no reply
Got the same problem. I really want that product but no answers...